Re: [PATCH 2/3] dt-bindings: net: realtek,rtl9301-switch: add port LED controller

[Krzysztof Kozlowski]

On Sun, Oct 18, 2026 at 12:43:37PM -0700, Ross Cawston wrote:
> The switch drives the port LEDs, and some boards wire LEDs to it that
> have no hardware function and are switched in software, such as PoE
> status LEDs. Allow the software LED control block, described by
> realtek,rtl9301-port-leds, as a child of the switch like its I2C and
> MDIO controllers.
> 
> Signed-off-by: Ross Cawston <ross@xxxxxxx>
> ---
>  .../devicetree/bindings/net/realtek,rtl9301-switch.yaml        | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/realtek,rtl9301-switch.yaml b/Documentation/devicetree/bindings/net/realtek,rtl9301-switch.yaml
> index 80eabc17066..9529327ee0c 100644
> --- a/Documentation/devicetree/bindings/net/realtek,rtl9301-switch.yaml
> +++ b/Documentation/devicetree/bindings/net/realtek,rtl9301-switch.yaml
> @@ -57,6 +57,9 @@ patternProperties:
>    'mdio-controller@[0-9a-f]+$':
>      $ref: realtek,rtl9301-mdio.yaml#
>  
> +  'led-controller@[0-9a-f]+$':
> +    $ref: /schemas/leds/realtek,rtl9301-port-leds.yaml#

This depends on previous patch, so cover letter should be explicit what
maintainers can or cannot do with it.

Best regards,
Krzysztof