Re: [PATCH v2 2/2] arm64: dts: qcom: sm8550: Add support for Samsung Galaxy Tab S9 Wi-Fi

[Konrad Dybcio]

On 10/15/26 11:06 PM, Nizat Mikayilli wrote:
> On 10/12/26 4:14 PM, Konrad Dybcio wrote:
>> On 10/5/26 9:47 PM, Nizat Mikayilli via B4 Relay wrote:
>>> amplifiers and the VA macro probing. The microSD slot is described but
>>> not yet tested; audio playback and capture were not exercised.
>>
>> Please test them!
> 
> Done: microSD works (UHS-I SDR104, read/write verified, card detect
> works), and so do speaker playback and DMIC capture. I'll update the
> commit message in v3.
> 
>>> The display panel, touch, pen digitizer, cameras, battery/charging and
>>> the wireless module are not described here; the latter needs additional
>>> power sequencing and follows as a separate series.
>>
>> Wi-Fi/BT should be a low-hanging fruit, see e.g. sm8550-qrd.dts
> 
> I tried a qrd-style description (wcn6855-pmu, PCIe0 with wifi@0, BT on
> uart14). From a cold boot the chip doesn't come up: all PMU rails are on
> and wlan-en is high, but there's no PCIe link and BT times out.
> 
> It works with the same nodes once the 11 WLAN PDC messages from the
> downstream qcom,pdc_init_table are sent to AOP over the AOSS QMP during
> power-up (tested with a hacked-up pwrseq-qcom-wcn). So this needs a
> driver change first, and I'd like to send it separately.

Sure!

> Any preference on how to model that? I'd rather not put the raw strings
> in DT, so a table in the driver seems better, but I'm not sure what to
> key it on, since other boards don't need it.

Please show me what your current diff is, on other platforms we didn't
have to go through these hoops..

Konrad