[PATCH 2/9] dt-bindings: phy: bcm-ns-usb3-phy: Describe the NSP variant

[Florian Fainelli]

Northstar Plus uses the Northstar Bx PHY register sequence but also
requires coordinated USB2 and USB3 core resets and a USB2 IDM interface
clock enable.

Add an NSP compatible with a required USB2 DMP phandle. Describe the
shared PHY relationship with EHCI, OHCI and xHCI so initialization
finishes before any host starts operating.

Signed-off-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
---
 .../bindings/phy/bcm-ns-usb3-phy.yaml         | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
index 7fd419db45d0..00d69b86cbff 100644
--- a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
@@ -14,6 +14,9 @@ description: |
   Known B1: BCM4707 rev 6
   Known C0: BCM47094 rev 0
 
+  Northstar Plus uses the Bx programming sequence, with coordinated USB2 and
+  USB3 resets. Its PHY is shared by the EHCI, OHCI and xHCI controllers.
+
 maintainers:
   - Rafał Miłecki <rafal@xxxxxxxxxx>
 
@@ -22,6 +25,7 @@ properties:
     enum:
       - brcm,ns-ax-usb3-phy
       - brcm,ns-bx-usb3-phy
+      - brcm,nsp-usb3-phy
 
   reg:
     description: address of MDIO bus device
@@ -32,6 +36,13 @@ properties:
     description:
       Phandle to the DMP (Device Management Plugin) syscon
 
+  usb2-dmp-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the USB2 DMP on Northstar Plus, for its interface clock and
+      reset. All USB host controllers must reference this shared PHY so that
+      initialization completes before any of them starts using it.
+
   "#phy-cells":
     const: 0
 
@@ -41,6 +52,18 @@ required:
   - usb3-dmp-syscon
   - "#phy-cells"
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: brcm,nsp-usb3-phy
+    then:
+      required:
+        - usb2-dmp-syscon
+    else:
+      properties:
+        usb2-dmp-syscon: false
+
 additionalProperties: false
 
 examples:
-- 
2.53.0