Re: [PATCH 2/3] serial: 8250_dw: configure the Allwinner H616 UART

[Andy Shevchenko]

On Sat, Oct 24, 2026 at 10:10:33PM +0900, Chen-Yu Tsai wrote:
> On Sat, Oct 24, 2026 at 12:12 AM James Hilliard
> <james.hilliard1@xxxxxxxxx> wrote:
> > On Fri, Oct 23, 2026 at 2:44 AM Andy Shevchenko
> > <andriy.shevchenko@xxxxxxxxxxxxxxx> wrote:
> > > On Fri, Oct 23, 2026 at 01:33:50AM -0600, James Hilliard wrote:

...

> > > >       /* Internal 8250 only */
> > > >       UART_PORT_AIROHA                = 124,
> > > >       UART_PORT_AIROHA_HS             = 125,
> > > > +     UART_PORT_DW_APB_256    = 126,
> > >
> > > Why? Besides the poorly chosen name, what prevents us from modifying the
> > > corresponding parameters at probe time by leaving the one of the existing
> > > types?
> >
> > The new type was primarily a way to reuse the core's FIFO configuration
> > table, including the RX trigger mapping. H616 uses thresholds of 1, 64,
> > 128 and 254 bytes, whereas PORT_16550A maps the same FCR bits to 1, 4, 8
> > and 14 bytes. Overriding only fifosize and tx_loadsz would leave
> > rx_trig_bytes reporting and selecting the wrong thresholds.
> >
> > The core already has get_rxtrig/set_rxtrig callbacks, though. I'll rework
> > this to retain PORT_16550A, supply the H616 FIFO parameters during setup,
> > and use those callbacks for the correct trigger mapping.
> 
> Please consider just taking the FIFO size from the DT. On some chips
> not every UART has the same size FIFO, so we already need to deal with
> it.
> 
> Also, FIFO size is a standard UART DT property, though somehow not included
> for dw-uart.

FWIW, it supports all standard properties for UART.
Check what uart_read_port_properties() does.


-- 
With Best Regards,
Andy Shevchenko