[PATCH v2 12/12] arm64: dts: qcom: qcs615: Add GP M/N clock controller

[Taniya Das]

Add the GP M/N clock controller and its pin configuration for QCS615.
The controller uses the PDM XO4 and AHB clocks from GCC and routes its
output to gpio29.

Signed-off-by: Taniya Das <taniya.das@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/talos.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/talos.dtsi b/arch/arm64/boot/dts/qcom/talos.dtsi
index 8ed6f2755705c38796698747dfe7bba1afd1859e..c415e782804ca8c9d09670cb8c8cd2353d796b23 100644
--- a/arch/arm64/boot/dts/qcom/talos.dtsi
+++ b/arch/arm64/boot/dts/qcom/talos.dtsi
@@ -1611,6 +1611,13 @@ cam_mclk1_default: cam-mclk1-default-state {
 				bias-disable;
 			};
 
+			gp_mn_active: gp-mn-active-state {
+				pins = "gpio29";
+				function = "gp_mn";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			cam_mclk2_default: cam-mclk2-default-state {
 				pins = "gpio30";
 				function = "cam_mclk";
@@ -4028,6 +4035,20 @@ opp-202000000 {
 			};
 		};
 
+		gp_mn: clock-controller@88d3000 {
+			compatible = "qcom,qcs615-gp-mnd", "qcom,sc7280-gp-mnd";
+			reg = <0x0 0x088d3000 0x0 0x1000>;
+			clocks = <&gcc GCC_PDM_XO4_CLK>,
+				 <&gcc GCC_PDM_AHB_CLK>;
+			clock-names = "pdm_clk", "ahb_clk";
+			#clock-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&gp_mn_active>;
+			assigned-clocks = <&gcc GCC_PDM_XO4_CLK>;
+			assigned-clock-rates = <19200000>;
+			status = "disabled";
+		};
+
 		qspi: spi@88df000 {
 			compatible = "qcom,qcs615-qspi",
 				     "qcom,qspi-v1";

-- 
2.34.1