[PATCH 2/2] arm64: dts: imx8mq-mnt-reform2: Drive the internal panel from DCSS

From: Christian Gmeiner

Date: Mon Nov 16 2026 - 07:12:06 EST


From: Christian Gmeiner <cgmeiner@xxxxxxxxxx>

The panel is driven by LCDIF through the NWL MIPI-DSI host and a
SN65DSI86 eDP bridge. LCDIF underflows at 1920x1080. The picture shows
horizontal streaks and the underflow flag in LCDIF_CTRL1 is set several
times per second, even when idle.

DCSS does not have this problem. Connect it to the MIPI-DSI host and
leave LCDIF disabled.

Use IMX8MQ_CLK_DC_PIXEL as pixel clock, with the video PLL at four
times the panel pixel clock. The DCSS binding only allows three
assigned-clocks, so the PLL setup is in the MIPI-DSI node.

Signed-off-by: Christian Gmeiner <cgmeiner@xxxxxxxxxx>
---
.../boot/dts/freescale/imx8mq-mnt-reform2.dts | 52 ++++++++++++++++++++--
1 file changed, 48 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
index 3ae3824be027..31c7428f0386 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
@@ -171,17 +171,61 @@ edp_bridge_out: endpoint {
};
};

-&lcdif {
- assigned-clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
- assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>;
- /delete-property/assigned-clock-rates;
+&dcss {
+ clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>,
+ <&clk IMX8MQ_CLK_DISP_AXI_ROOT>,
+ <&clk IMX8MQ_CLK_DISP_RTRM_ROOT>,
+ <&clk IMX8MQ_CLK_DC_PIXEL>,
+ <&clk IMX8MQ_CLK_DISP_DTRC>;
+ assigned-clocks = <&clk IMX8MQ_CLK_DISP_AXI>,
+ <&clk IMX8MQ_CLK_DISP_RTRM>,
+ <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>,
+ <&clk IMX8MQ_SYS1_PLL_800M>,
+ <&clk IMX8MQ_CLK_25M>;
status = "okay";
+
+ port {
+ dcss_dsi_out: endpoint {
+ remote-endpoint = <&mipi_dsi_dcss_in>;
+ };
+ };
+};
+
+&lcdif {
+ /delete-node/ port;
};

&mipi_dsi {
+ /*
+ * DCSS takes the pixel clock from the video PLL. The PLL runs at four
+ * times the 138.78 MHz panel pixel clock.
+ */
+ assigned-clocks = <&clk IMX8MQ_CLK_DSI_AHB>,
+ <&clk IMX8MQ_CLK_DSI_CORE>,
+ <&clk IMX8MQ_CLK_DSI_IPG_DIV>,
+ <&clk IMX8MQ_VIDEO_PLL1_BYPASS>,
+ <&clk IMX8MQ_CLK_DC_PIXEL>,
+ <&clk IMX8MQ_VIDEO_PLL1>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>,
+ <&clk IMX8MQ_SYS1_PLL_266M>,
+ <0>,
+ <&clk IMX8MQ_VIDEO_PLL1>,
+ <&clk IMX8MQ_VIDEO_PLL1_OUT>;
+ assigned-clock-rates = <80000000>, <266000000>, <20000000>, <0>, <0>,
+ <555120000>;
status = "okay";

ports {
+ port@0 {
+ /delete-node/ endpoint@0;
+
+ mipi_dsi_dcss_in: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&dcss_dsi_out>;
+ };
+ };
+
port@1 {
reg = <1>;


--
2.56.0