Re: [PATCH v3 0/8] media: i2c: ov9282: fix strobe timing and control handling

From: Sakari Ailus

Date: Mon Nov 16 2026 - 07:27:05 EST


Hi Richard,

On Tue, Nov 10, 2026 at 02:10:09PM +0100, Richard Leitner wrote:
> This series fixes a set of related issues in the OV9282 strobe timing
> and control handling code.
>
> The driver updated exposure- and flash duration-related control ranges
> in several places, but some of those updates used an incorrect timebase
> or were triggered too late, which could leave the controls clamped
> against stale values.
>
> The series:
> - checks the return value of the exposure range update
> - drops the redundant vblank field
> - converts probe error messages to dev_err_probe()
> - fixes the 8-bit pixel rate (192 MHz instead of 200 MHz) and the
> corresponding line time calculation
> - treats the strobe frame span as a line count and converts the flash
> duration accordingly
> - fixes the flash duration range (min/max/default) and refreshes it on
> HBLANK changes, independent of the sensor power state
> - refreshes the exposure and flash duration ranges on mode changes
> - reprograms the strobe span when HBLANK changes
>
> This series was tested with an ov9282 sensor on a vision components camera
> module attached to an i.MX8MP mainboard in a defined (dark) environment
> with a custom made LED flash pcb.
>
> Any feedback is warmly welcome.

Can you fix the issues 0-day bot found? I think the patches seem fine
otherwise.

--
Regards,

Sakari Ailus