Re: [PATCH v3 0/8] media: i2c: ov9282: fix strobe timing and control handling

From: Richard Leitner

Date: Mon Nov 16 2026 - 08:49:02 EST


Hi Sakari,

On Mon, Nov 16, 2026 at 02:27:00PM +0200, Sakari Ailus wrote:
> Hi Richard,
>
> On Tue, Nov 10, 2026 at 02:10:09PM +0100, Richard Leitner wrote:
> > This series fixes a set of related issues in the OV9282 strobe timing
> > and control handling code.
> >
> > The driver updated exposure- and flash duration-related control ranges
> > in several places, but some of those updates used an incorrect timebase
> > or were triggered too late, which could leave the controls clamped
> > against stale values.
> >
> > The series:
> > - checks the return value of the exposure range update
> > - drops the redundant vblank field
> > - converts probe error messages to dev_err_probe()
> > - fixes the 8-bit pixel rate (192 MHz instead of 200 MHz) and the
> > corresponding line time calculation
> > - treats the strobe frame span as a line count and converts the flash
> > duration accordingly
> > - fixes the flash duration range (min/max/default) and refreshes it on
> > HBLANK changes, independent of the sensor power state
> > - refreshes the exposure and flash duration ranges on mode changes
> > - reprograms the strobe span when HBLANK changes
> >
> > This series was tested with an ov9282 sensor on a vision components camera
> > module attached to an i.MX8MP mainboard in a defined (dark) environment
> > with a custom made LED flash pcb.
> >
> > Any feedback is warmly welcome.
>
> Can you fix the issues 0-day bot found? I think the patches seem fine
> otherwise.

Sure. I will send a v4 in a few minutes. Thanks for the reminder!

regards;rl

>
> --
> Regards,
>
> Sakari Ailus