[PATCH 8/8] arm64: dts: synaptics: Enable Ethernet on SL2619 RDK

From: Jisheng Zhang

Date: Mon Nov 16 2026 - 09:16:56 EST


The SL2619 RDK uses the second MAC with an external RGMII PHY at MDIO
address 2. Enable the MAC, its pin configuration and the shared MDIO
selector. Describe the PHY reset GPIO and timing on the demultiplexed
bus selecting the second MDIO master.

Signed-off-by: Jisheng Zhang <jszhang@xxxxxxxxxx>
---
arch/arm64/boot/dts/synaptics/sl2619-rdk.dts | 77 ++++++++++++++++++++
1 file changed, 77 insertions(+)

diff --git a/arch/arm64/boot/dts/synaptics/sl2619-rdk.dts b/arch/arm64/boot/dts/synaptics/sl2619-rdk.dts
index 58901ac2a050..d10811e8436a 100644
--- a/arch/arm64/boot/dts/synaptics/sl2619-rdk.dts
+++ b/arch/arm64/boot/dts/synaptics/sl2619-rdk.dts
@@ -13,4 +13,81 @@
/ {
model = "Synaptics SL2619 RDK";
compatible = "syna,sl2619-rdk", "syna,sl2619";
+
+ aliases {
+ ethernet0 = &ethernet1;
+ ethernet1 = &ethernet0;
+ };
+
+ mdio-demux {
+ compatible = "mdio-demux";
+ mdio-parent-bus = <&mdio1>;
+ mux-controls = <&mux1 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio@1 {
+ reg = <0x1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet_phy1: ethernet-phy@2 {
+ compatible = "ethernet-phy-id001c.c916";
+ reg = <2>;
+ pinctrl-0 = <&eth1_phy_rst_pmux>;
+ pinctrl-names = "default";
+ realtek,clkout-disable;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&portf 3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+ };
+};
+
+&sm_pinctrl {
+ eth1_phy_rst_pmux: eth1_phy_rst-pmux {
+ groups = "SM_GPIO35";
+ function = "gpio";
+ };
+};
+
+&pinctrl {
+ eth_mdio_pmux: eth-mdio-pmux {
+ groups = "GPIO31", "GPIO32";
+ function = "rgmii";
+ drive-strength = <7>;
+ };
+
+ eth1_tx_pmux: eth1_tx-pmux {
+ groups = "GPIO48", "GPIO49", "GPIO50", "GPIO51", "GPIO57", "GPIO58";
+ function = "rgmii2";
+ drive-strength = <10>;
+ input-disable;
+ bias-disable;
+ };
+
+ eth1_rx_pmux: eth1_rx-pmux {
+ groups = "GPIO52", "GPIO53", "GPIO54", "GPIO55", "GPIO56", "GPIO59";
+ function = "rgmii2";
+ drive-strength = <7>;
+ };
+};
+
+&mux1 {
+ status = "okay";
+};
+
+&ethernet1 {
+ status = "okay";
+ pinctrl-0 = <&eth_mdio_pmux>, <&eth1_tx_pmux>, <&eth1_rx_pmux>;
+ pinctrl-names = "default";
+ phy-handle = <&ethernet_phy1>;
+ phy-mode = "rgmii-id";
+
+ mdio1: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
--
2.55.0