Re: [PATCH v2 5/7] dt-bindings: pinctrl: airoha: add AN7589

From: Conor Dooley

Date: Mon Nov 16 2026 - 13:16:14 EST


On Mon, Nov 16, 2026 at 06:47:27PM +0100, John Crispin wrote:
> On Fri, Nov 13, 2026 at 05:40:42PM +0000, Conor Dooley wrote:
> > As Lee requested, please split this out. Two patches, maybe even three.
>
> Agreed. v3 splits it into three patches.
>
> > Do we even need a child node here? If all this node does is
> > gpio/pinctrl, why can the driver not bind directly to this node?
> >
> > What else does it do that warrants being a syscon?
>
> The block also holds the PWM controller. Its registers interleave with
> the GPIO ones. The PWM series adds it as a second child, as on the
> EN7581. That series has a depency on this one so I have not posted it yet.
>
> > Otherwise, there should only be one. uart1 and uart2 should have
> > different nodes.
>
> Agreed. v3 sets maxItems to 1. Only pcm_spi and pcie keep more, as
> their groups carry different signals of one device.
>
> > So here, maxItems should be 1 for similar reasons.
>
> Agreed, v3 does this for i2c too.
>
> > I'm also curious about why this goes up to 74. None of the functions
> > have 74 pins, surely?
>
> A conf node can set the same config on any set of pins. 74 is all the
> pins. The EN7581 binding does the same with 58.

A difference in philosophy I guess - I would be grouping the pins in the
config node by user. So that there would be something like

spi1-stuff {
spi1-function {
function = spi
group = spi1
}

spi1-config1 {
pins = 1, 2
config1
config2
}

spi2-config2 {
pins = 3
config1
}
}

spi {
pinctrl-0 = spi1-function, spi-config1, spi-config2
}

or

spi {
pinctrl-0 = spi1-stuff
}

IMO, having config nodes covering more than one "feature" doesn't really
make sense, as you'd end up with something like:

spi1-function {
function = spi
group = spi1
}

all-config1-config2 {
pins = 1, 2, 4, 5
config1
config2
}

all-config1 {
pins = 3
config1
}

which kinda falls apart I think when a node can request a setting for
pins that are not part of it (in this case, that's pins 4 and 5)

spi {
pinctrl-0 = spi1-function, all-config1, all-config1-config2
}

So my opinion is that the max number of items should be the size of the
largest peripheral.

What's the largest actual user on the 7581?

>
> v3 will follow shortly.
>
> John
>
>

Attachment: signature.asc
Description: PGP signature