[PATCH] PCI: fu740: Check return value of clk_prepare_enable()

From: Jayaraj Devaraj

Date: Mon Nov 16 2026 - 15:49:55 EST


fu740_pcie_host_init() ignores the return value of the second
clk_prepare_enable() call on pcie_aux, so a failure to enable the
clock is silently ignored and the controller is programmed anyway.

Check the return value and propagate the error.

Signed-off-by: Jayaraj Devaraj <jayarajdmit@xxxxxxxxx>
---
drivers/pci/controller/dwc/pcie-fu740.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-fu740.c b/drivers/pci/controller/dwc/pcie-fu740.c
index 00ec69a09164..b2eded23b52c 100644
--- a/drivers/pci/controller/dwc/pcie-fu740.c
+++ b/drivers/pci/controller/dwc/pcie-fu740.c
@@ -270,7 +270,11 @@ static int fu740_pcie_host_init(struct dw_pcie_rp *pp)
/* Clear hold_phy_rst */
writel_relaxed(0x0, afp->mgmt_base + PCIEX8MGMT_APP_HOLD_PHY_RST);
/* Enable pcieauxclk */
- clk_prepare_enable(afp->pcie_aux);
+ ret = clk_prepare_enable(afp->pcie_aux);
+ if (ret) {
+ dev_err(dev, "unable to re-enable pcie_aux clock\n");
+ return ret;
+ }
/* Set RC mode */
writel_relaxed(0x4, afp->mgmt_base + PCIEX8MGMT_DEVICE_TYPE);

--
2.34.1