Re: (subset) [PATCH 0/3] clk: bcm2835: describe the BCM2711 GISB clock for the GENET MDIO controller
From: Brian Masney
Date: Wed Nov 18 2026 - 18:41:44 EST
Hi Florian,
On Fri, Nov 13, 2026 at 07:39:42PM -0800, Florian Fainelli wrote:
> On 11/1/2026 6:03 PM, Brian Masney wrote:
> > On Tue, 20 Oct 2026 16:58:08 +0200, Nicolai Buchwitz wrote:
> > > clk: bcm2835: describe the BCM2711 GISB clock for the GENET MDIO controller
> > >
> > > The timestamped MDIO write series [1] needs the reference clock the
> > > GENET MDIO controller divides its MDC from. On BCM2711 that clock is
> > > not described anywhere, so 5/5 of that series hardcodes 200 MHz behind
> > > a compatible match, and mdio-bcm-unimac's clock-frequency handling
> > > assumes the 250 MHz of the STB chips.
> > >
> > > [...]
> >
> > Applied, thanks!
> >
> > [1/3] dt-bindings: clock: bcm2835: add the BCM2711 GISB clock
> > https://git.kernel.org/clk/linux/c/af7994af5228
> > [2/3] clk: bcm2835: register the BCM2711 GISB clock
> > https://git.kernel.org/clk/linux/c/ab94dbf30233
>
> Brian, can you also take patch #3, or you would have create an immutable
> branch for me to pull from. Patch #3 depends upon the BCM2711_CLOCK_GISB
> constant being defined.
I ended up rebasing the clk trees and I pulled these two commits out
into a separate clk-broadcom branch that's based on top of v7.4-rc1.
https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/log/?h=clk-broadcom
Is that sufficient for you to pull? If not, I can spin off a proper
immutable branch with a signed git tag. If there's any other
Broadcom-related clk commits this development cycle, I will add them to
the clk-broadcom branch, but there's nothing else in the queue at the
moment.
Brian