Den 01-Mar-00 15:09:29 skrev Georgios Kossionis fĝlgende om "Re: Problem: Not configure hde on HPT366 (on ABIT BP6).":
> Using:
> LILO: <kernel_name> ide2=0xb400,0x0 ide3=0xc000,0x0
> I have the following in the boot:
> HPT366: onboard version of chipset, pin1=1 pin2=2
> HPT366: IDE controller on PCI bus 00 dev 98
> HPT366: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
^^^^
> HPT366: IDE controller on PCI bus 00 dev 99
> HPT366: not 100% native mode: will probe irqs later
> ide1: BM-DMA at 0xc400-0xc407, BIOS settings: hdc:pio, hdd:pio
^^^^
> hda: ST328040A, ATA DISK drive
> ide2: ports already in use, skipping probe
> ide0de0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
What did you modify? Previously, it said:
-----
HPT366: onboard version of chipset, pin1=1 pin2=2
HPT366: IDE controller on PCI bus 00 dev 98
HPT366: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0xb800-0xb807, BIOS settings: hde:DMA, hdf:pio
^^^^
HPT366: IDE controller on PCI bus 00 dev 99
HPT366: not 100% native mode: will probe irqs later
ide3: BM-DMA at 0xc400-0xc407, BIOS settings: hdg:pio, hdh:pio
^^^^
hde: ST328040A, ATA DISK drive
ide2 at 0xb000-0xb007,0xb402 on irq 15
-----
Perhaps you could do a cat /proc/ioports so we can see how much has been
configured already? Perhaps also grep -F -e '' /proc/ide/hd?/model.
Regards,
/ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻTŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ\
| Rask Ingemann Lambertsen | E-mail: mailto:rask@kampsax.dtu.dk |
| Please do NOT Cc: to me or the | WWW: http://www.gbar.dtu.dk/~c948374/ |
| mailing list. I am on the list.| "ThrustMe" on XPilot, ARCnet and IRC |
| Windows NT is the OS of the future and always will be... |
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Mar 07 2000 - 21:00:11 EST