I just compiled kernel 2.3.49 but things are going in the same way.
This is the output of the hdparm -d 1 /dev/hda command:
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: DMA disabled
ide0: reset: success
obviously, I compiled with the experimental support for via chipset
and the cable is the right one needed for ata/66.
thanks in advance,
marco
-------
A volte mi piacerebbe tornare indietro / la' dove e' rimasta la vita
correre coi pattini sulle rive dell'oceano / giocare con lei finche'
non sara' finita
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Mar 07 2000 - 21:00:15 EST