SCSI Messages

• Next message: Richard Gooch: "[PATCH] Fix for PCMCIA=m"
• Previous message: Ronald G. Minnich: "Re: Help in DSM design"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

I am getting some new SCSI messages with the newer 2.3 kernels. I also
changed from IBM drives to the two Western Digital drives so that may
have something to do with this. These drivers seem to work just fine
under 2.2.9, but under 2.3.49 I get these messages and the SCSI bus
hangs for periods of up to 30 seconds. Any ideas ?

Thanks
Jack Griffin

(scsi0) <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> found at PCI
0/20/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 392 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.0/3.2.4
       <Adaptec AIC-7890/1 Ultra2 SCSI host adapter>
scsi : 1 host.
(scsi0:0:0:0) invalid cur_addr:0x199947f during WIDE_RESIDUE
(scsi0:0:0:0) sg_address[-1]:0x1999380 sg_length[-1]:255
(scsi0:0:0:0) sg_address:0x0 sg_length:0
(scsi0:0:0:0) Synchronous at 80.0 Mbyte/sec, offset 31.
(scsi0:0:0:0) invalid cur_addr:0x199947f during WIDE_RESIDUE
(scsi0:0:0:0) sg_address[-1]:0x1999380 sg_length[-1]:255
(scsi0:0:0:0) sg_address:0x0 sg_length:0
(scsi0:0:0:0) invalid cur_addr:0x1ffe7fa4 during WIDE_RESIDUE
(scsi0:0:0:0) sg_address[-1]:0x1ffe7ea4 sg_length[-1]:256
(scsi0:0:0:0) sg_address:0x0 sg_length:0
  Vendor: WDIGTL Model: WDE18310 ULTRA2 Rev: 1.30
  Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
(scsi0:0:1:0) invalid cur_addr:0x19996bf during WIDE_RESIDUE
(scsi0:0:1:0) sg_address[-1]:0x19995c0 sg_length[-1]:255
(scsi0:0:1:0) sg_address:0x0 sg_length:0
(scsi0:0:1:0) Synchronous at 80.0 Mbyte/sec, offset 31.
(scsi0:0:1:0) invalid cur_addr:0x19996bf during WIDE_RESIDUE
(scsi0:0:1:0) sg_address[-1]:0x19995c0 sg_length[-1]:255
(scsi0:0:1:0) sg_address:0x0 sg_length:0
(scsi0:0:1:0) invalid cur_addr:0x1ffe7fa4 during WIDE_RESIDUE
(scsi0:0:1:0) sg_address[-1]:0x1ffe7ea4 sg_length[-1]:256
(scsi0:0:1:0) sg_address:0x0 sg_length:0
  Vendor: WDIGTL Model: WDE18310 ULTRA2 Rev: 1.30
  Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
scsi : detected 2 SCSI disks total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 35761710 [17461 MB]
[17.5 GB]
 sda: sda1 sda2
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 35761710 [17461 MB]
[17.5 GB]
 sdb: sdb1 sdb2 < sdb5 >

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

• Next message: Richard Gooch: "[PATCH] Fix for PCMCIA=m"
• Previous message: Ronald G. Minnich: "Re: Help in DSM design"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Tue Mar 07 2000 - 21:00:19 EST