Hi Alan,
running kmidi on various .mid files gives me
No instrument mapped to tone bank 0, program 5 - this instrument will not
be heard
No instrument mapped to tone bank 0, program 50 - this instrument will not
be heard
No instrument mapped to tone bank 0, program 62 - this instrument will not
be heard
No instrument mapped to tone bank 0, program 64 - this instrument will not
be heard
(numbers differ depending on .mid, obviously) and so it claims that it
plays ok but I hear nothing.
Also, it looks like it is not just MIDI. Even .au does not work as
expected, running play /usr/share/sndconfig/sample.au loops forever and so
does "cat sample.au > /dev/audio". Then, immediately after that running
"kmidi sample.mid" (the one in red hat's /usr/share/sndconfig) generates
noise. Running kmidi again, makes everything quiet again.
I have statically compiled only es1371 support and nothing else. And it
worked before quite recently (unfortunately, can't remember exactly which
2.3.x level - I don't use sound that much).
However, running xawtv gives fine sound - no problem at all. And bttv/i2c
are all statically compiled too.
Btw, while we are at it - it is irritating to have to jump into
"Sound" section just to enable "BT848 support" in make xconfig in Video
for Linux section.
Regards,
Tigran
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed May 31 2000 - 21:00:24 EST