The card works fine with kernel 2.2.17pre12 in the same machine.
With 2.4.0-test4, if I compile the de4x5 driver into the kernel it
locks up on boot after it has detected the SCSI disks. Just before it
normally would display the network devices.
If I try insmod:
# insmod de4x5.o
de4x5.o: init_module: Input/output error
The tulip driver does not find the card at all neither with a 2.2 nor
a 2.4 kernel.
Any help would be much appreciated.
-- - Terje tm@funcom.com- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Jul 23 2000 - 21:00:09 EST