Hello
I have a Dell Dimension XPS B800r. I installed red hat 6.2. Every thing
seams went well except I can not start network. The network card is a
PCI card. I notice the error in /var/log/dmesg
PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086,
DID=2411
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
Any suggestion will be greatly appreciated.
Thanks
Shenjun
************************************************************
On Tue, 18 Jul 2000, Peter Rival wrote:
> So I finally got a chance to boot my Alpha AS4100 (Rawhide) back into
> Linux today. First thought - grab the latest kernel and see what
> happens. Unfortunately, it wasn't so good. :( Apparently our PCI code
> doesn't handle KZPSA (DEC proprietary) adapters very well, which caused
> the QLogic and FDDI adapters to not be able to be set up. Boot log is
> below, as well as output from a "show dev" and "show conf" at the
> console. Anyone have any suggestions (hopefully other than "take out
> the KZPSA" :)? I've gotten the system to boot on 2.3 kernels (before
> the IO-MMU changes, which were just fixed for rawhide recently) and 2.2
> kernels as well...
>
> - Pete
>
> --boot log--
> P00-ljohn>>> b dkb100 -fi vmlinux.24t4.gz -fl "root=/dev/sdb1
> console=ttyS0"
> (boot dkb100.1.0.2000.1 -file vmlinux.24t4.gz -flags root=/dev/sdb1
> console=ttyS0)
> øblock 0 of dkb100.1.0.2000.1 is a valid boot block
> reading 162 blocks from dkb100.1.0.2000.1
> bootstrap code read in
> base = 200000, image_start = 0, image_bytes = 14400
> initializing HWRPB at 2000
> initializing page table at 1f2000
> initializing machine state
> setting affinity to the primary CPU
> configuring I/O adapters...
> ncr0, hose 1, bus 0, slot 1
> isp0, hose 1, bus 2, slot 0
> pks0, hose 1, bus 0, slot 3
> pfi0, hose 1, bus 0, slot 4
> floppy0, hose 0, bus 1, slot 0
> pfi1, hose 0, bus 0, slot 4
> tulip0, hose 0, bus 0, slot 5
> mc1, hose 0, bus 0, slot 2
> mc0, hose 1, bus 0, slot 5
> jumping to bootstrap code
> aboot: Linux/Alpha SRM bootloader version 0.7
> aboot: switching to OSF/1 PALcode version 1.23
> aboot: booting from device 'SCSI 1 2000 0 1 100 1011 10201077'
> aboot: valid disklabel found: 5 partitions.
> aboot: loading compressed vmlinux.24t4.gz...
> aboot: zero-filling 377932 bytes at fffffc0000aa2464
> aboot: starting kernel vmlinux.24t4.gz with arguments root=/dev/sdb1
> console=ttyS0
> Linux version 2.4.0-test4 (root@littlejohn.zk3.dec.com) (gcc version
> egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #14 SMP Sat Jul 18
> 12:45:41 EST 2048
> Booting on Rawhide variation Dodge using machine vector Rawhide from SRM
>
> Command line: root=/dev/sdb1 console=ttyS0
> memcluster 0, usage 1, start 0, end 256
> memcluster 1, usage 0, start 256, end 524279
> memcluster 2, usage 1, start 524279, end 524288
> freeing pages 256:1024
> freeing pages 1410:524279
> SMP: 4 CPUs probed -- cpu_present_mask = f
> On node 0 totalpages: 524288
> zone(0): 524288 pages.
> zone(1): 0 pages.
> zone(2): 0 pages.
> Kernel command line: root=/dev/sdb1 console=ttyS0
> mcpcia_init_hoses: found 2 hoses
> Turning on RTC interrupts.
> Calibrating delay loop... 926.52 BogoMIPS
> Memory: 4106728k/4194232k available (1648k kernel code, 85456k reserved,
> 441k data, 488k init)
> Dentry-cache hash table entries: 262144 (order: 9, 4194304 bytes)
> Buffer-cache hash table entries: 262144 (order: 8, 2097152 bytes)
> Page-cache hash table entries: 524288 (order: 9, 4194304 bytes)
> Inode-cache hash table entries: 262144 (order: 9, 4194304 bytes)
> POSIX conformance testing by UNIFIX
> Using heuristic of 2147483647 cycles.
> SMP starting up secondaries.
> Calibrating delay loop... 931.43 BogoMIPS
> Calibrating delay loop... 931.43 BogoMIPS
> Calibrating delay loop... 931.43 BogoMIPS
> SMP: Total of 4 processors activated (3720.81 BogoMIPS).
> PCI: Failed to allocate resource 0 for PCI device 1011:0018 (Digital
> Equipment Corporation)
> failed root[0:7ffffff] min[2200000] size[8000000]
> failed res[8000000:7ffffff]
> PCI: dev Digital Equipment Corporation KZPSA [KZPSA] type 64-bit
> PCI: dev Digital Equipment Corporation KZPSA [KZPSA] type 64-bit
> PCI: Failed to allocate resource 0 for PCI device 1011:0018 (Digital
> Equipment Corporation)
> failed root[200000000:207ffffff] min[2200000] size[20000000]
> failed res[220000000:207ffffff]
> PCI: Cannot find parent resource for device 02:00.0
> Linux NET4.0 for Linux 2.3
> Based upon Swansea University Computer Society NET3.039
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP
> IP: routing cache hash table of 32768 buckets, 512Kbytes
> TCP: Hash tables configured (established 262144 bind 43690)
> Starting kswapd v1.6
> initialize_kbd: Keyboard reset failed, no ACK
> pty: 256 Unix98 ptys configured
> keyboard: Timeout - AT keyboard not present?
> keyboard: Timeout - AT keyboard not present?
> Floppy drive(s): fd0 is 2.88M
> FDC 0 is a National Semiconductor PC87306
> LVM version 0.8final by Heinz Mauelshagen (15/02/2000)
> lvm -- Driver successfully initialized
> qlogicisp : i/o region 0x0-0xff already in use
> ncr53c8xx: at PCI bus 1, device 1, function 0
> ncr53c8xx: 53c810 detected
> ncr53c810-0: rev 0x2 on pci bus 1 device 1 function 0 irq 56
> ncr53c810-0: ID 7, Fast-10, Parity Checking
> ncr53c810-0: restart (scsi reset).
> scsi0 : ncr53c8xx - version 3.3b
> scsi : 1 host.
> Vendor: DEC Model: RRD46 (C) DEC Rev: 0557
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr0 at scsi0, channel 0, id 5, lun 0
> scsi : detected 1 SCSI cdrom total.
> ncr53c810-0-<5,0>: sync_msgout: 1-3-1-19-8.
> ncr53c810-0-<5,0>: sync msgin: 1-3-1-19-8.
> ncr53c810-0-<5,0>: sync: per=25 scntl3=0x10 ofs=8 fak=0 chg=0.
> ncr53c810-0-<5,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
> Uniform CD-ROM driver Revision: 3.11
> Serial driver version 5.01 (2000-05-29) with MANY_PORTS SHARE_IRQ
> SERIAL_PCI enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> rtc: Digital UNIX epoch (1952) detected
> Real Time Clock Driver v1.10c
> Linux Tulip driver version 0.9.7 (June 17, 2000)
> eth0: Digital DS21140 Tulip rev 32 at 0x8400, 00:00:F8:05:89:F3, IRQ 28.
>
> eth0: EEPROM default media type Autosense.
> eth0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1)
> block.
> eth0: MII transceiver #5 config 0000 status 780d advertising 01e1.
> defxx.c:v1.05a 2000/06/11 Lawrence V. Stefani (stefani@lkg.dec.com) and
> others
> fddi0: DEFPA at I/O addr = 0x8000, IRQ = 24, Hardware addr =
> 00-00-F8-4A-E0-E5
> buffer.c:45 spinlock stuck in kupdate at fffffc0000855624(3) owner
> swapper at fffffc0000826934(0) sched.c:32
> defxx: I/O range allocated to adapter (0x8400-0x847F) is already being
> used!
> kmem_create: Forcing size word alignment - nfs_fh
> request_module[block-major-8]: Root fs not mounted
> VFS: Cannot open root device "sdb1" or 08:11
> Please append a correct "root=" boot option
> Kernel panic: VFS: Unable to mount root fs on 08:11
> --end boot log--
> --show dev--
> P00-ljohn>>> show dev
> polling ncr0 (NCR 53C810) slot 1, bus 0 PCI, hose 1 ø SCSI Bus ID 7
> dka500.5.0.1.1 DKA500 RRD46 0557
> polling isp0 (QLogic ISP10X0) slot 0, bus 2 PCI, hose 1 SCSI Bus ID 7
> dkb0.0.0.2000.1 DKB0 RZ1CB-CA LYJ0
> dkb100.1.0.2000.1 DKB100 RZ1CF-CF 1614
> dkb200.2.0.2000.1 DKB200 RZ1CB-CA LYJ0
> polling pks0 (DEC KZPSA) slot 3, bus 0 PCI, hose 1
> pkc.10.0.3.1 dkc TPwr 1 Fast 1 Bus ID 10 P01 A12
> dkc100.1.0.3.1 DKC100 RZ1CB-CA LYJ0
> dkc200.2.0.3.1 DKC200 RZ1CB-CS 0844
> dkc300.3.0.3.1 DKC300 RZ1CB-CA LYJ0
> dkc400.4.0.3.1 DKC400 RZ1CB-CA LYJ0
> dkc500.5.0.3.1 DKC500 RZ1CB-CA LYJ0
> dkc600.6.0.3.1 DKC600 RZ1CB-CA LYJ0
> polling floppy0 (FLOPPY) PCEB - XBUS hose 0
> dva0.0.0.1000.0 DVA0 RX23
> polling pfi0 (DEC PCI FDDI) slot 4, bus 0 PCI, hose 1
> fwa0.0.0.4.1 00-60-6D-D5-DB-07
> polling pfi1 (DEC PCI FDDI) slot 4, bus 0 PCI, hose 0
> fwb0.0.0.4.0 00-00-F8-4A-E0-E5
> polling tulip0 (DECchip 21140-AA) slot 5, bus 0 PCI, hose 0
> ewa0.0.0.5.0 00-00-F8-05-89-F3 Twisted-Pair
> --end show dev--
> --show conf--
> P00-ljohn>>> show conf
> Digital Equipment Corporation
> AlphaServer 4100
> Console V5.7-6 OpenVMS PALcode V1.21-2, Digital UNIX PALcode V1.23-2
> Module Type Rev Name
> System Motherboard 0 0000 mthrbrd0
> Memory 2048 MB EDO 0 0000 mem0
> Memory 2048 MB EDO 0 0000 mem1
> CPU (4MB Cache) 3 0001 cpu0
> CPU (4MB Cache) 3 0000 cpu1
> Bridge (IOD0/IOD1) 600 0032 iod0/iod1
> PCI Motherboard 8 0003 saddle0
> CPU (4MB Cache) 3 0000 cpu2
> CPU (4MB Cache) 3 0000 cpu3
> Bus 0 iod0 (PCI0)
> Slot Option Name Type Rev Name
> 1 PCEB 4828086 0015 pceb0
> 2 DEC PCI MC 181011 000E mc1
> 3 DEGPA-SA 112ae 0001 degpa0
> 4 DEC PCI FDDI f1011 0001 pfi1
> 5 DECchip 21140-AA 91011 0020 tulip0
> Bus 1 pceb0 (EISA Bridge connected to iod0, slot 1)
> Slot Option Name Type Rev Name
> Bus 0 iod1 (PCI1)
> Slot Option Name Type Rev Name
> 1 NCR 53C810 11000 0002 ncr0
> 2 PCI-PCI Bridge 11011 0002 pcb0
> 3 DEC KZPSA 81011 0000 pks0
> 4 DEC PCI FDDI f1011 0001 pfi0
> 5 DEC PCI MC 181011 0022 mc0
> Bus 2 pcb0 (PCI-PCI Bridge connected to iod1, slot 2)
> Slot Option Name Type Rev Name
> 0 QLogic ISP10X0 10201077 0002 isp0
> --end show conf--
>
> --
> To unsubscribe: send e-mail to axp-list-request@redhat.com with
> 'unsubscribe' as the subject. Do not send it to axp-list@redhat.com
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Jul 23 2000 - 21:00:11 EST