So I finally got a chance to boot my Alpha AS4100 (Rawhide) back into
Linux today. First thought - grab the latest kernel and see what
happens. Unfortunately, it wasn't so good. :( Apparently our PCI code
doesn't handle KZPSA (DEC proprietary) adapters very well, which caused
the QLogic and FDDI adapters to not be able to be set up. Boot log is
below, as well as output from a "show dev" and "show conf" at the
console. Anyone have any suggestions (hopefully other than "take out
the KZPSA" :)? I've gotten the system to boot on 2.3 kernels (before
the IO-MMU changes, which were just fixed for rawhide recently) and 2.2
kernels as well...
- Pete
--boot log--
P00-ljohn>>> b dkb100 -fi vmlinux.24t4.gz -fl "root=/dev/sdb1
console=ttyS0"
(boot dkb100.1.0.2000.1 -file vmlinux.24t4.gz -flags root=/dev/sdb1
console=ttyS0)
øblock 0 of dkb100.1.0.2000.1 is a valid boot block
reading 162 blocks from dkb100.1.0.2000.1
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 14400
initializing HWRPB at 2000
initializing page table at 1f2000
initializing machine state
setting affinity to the primary CPU
configuring I/O adapters...
ncr0, hose 1, bus 0, slot 1
isp0, hose 1, bus 2, slot 0
pks0, hose 1, bus 0, slot 3
pfi0, hose 1, bus 0, slot 4
floppy0, hose 0, bus 1, slot 0
pfi1, hose 0, bus 0, slot 4
tulip0, hose 0, bus 0, slot 5
mc1, hose 0, bus 0, slot 2
mc0, hose 1, bus 0, slot 5
jumping to bootstrap code
aboot: Linux/Alpha SRM bootloader version 0.7
aboot: switching to OSF/1 PALcode version 1.23
aboot: booting from device 'SCSI 1 2000 0 1 100 1011 10201077'
aboot: valid disklabel found: 5 partitions.
aboot: loading compressed vmlinux.24t4.gz...
aboot: zero-filling 377932 bytes at fffffc0000aa2464
aboot: starting kernel vmlinux.24t4.gz with arguments root=/dev/sdb1
console=ttyS0
Linux version 2.4.0-test4 (root@littlejohn.zk3.dec.com) (gcc version
egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #14 SMP Sat Jul 18
12:45:41 EST 2048
Booting on Rawhide variation Dodge using machine vector Rawhide from SRM
Command line: root=/dev/sdb1 console=ttyS0
memcluster 0, usage 1, start 0, end 256
memcluster 1, usage 0, start 256, end 524279
memcluster 2, usage 1, start 524279, end 524288
freeing pages 256:1024
freeing pages 1410:524279
SMP: 4 CPUs probed -- cpu_present_mask = f
On node 0 totalpages: 524288
zone(0): 524288 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/sdb1 console=ttyS0
mcpcia_init_hoses: found 2 hoses
Turning on RTC interrupts.
Calibrating delay loop... 926.52 BogoMIPS
Memory: 4106728k/4194232k available (1648k kernel code, 85456k reserved,
441k data, 488k init)
Dentry-cache hash table entries: 262144 (order: 9, 4194304 bytes)
Buffer-cache hash table entries: 262144 (order: 8, 2097152 bytes)
Page-cache hash table entries: 524288 (order: 9, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 4194304 bytes)
POSIX conformance testing by UNIFIX
Using heuristic of 2147483647 cycles.
SMP starting up secondaries.
Calibrating delay loop... 931.43 BogoMIPS
Calibrating delay loop... 931.43 BogoMIPS
Calibrating delay loop... 931.43 BogoMIPS
SMP: Total of 4 processors activated (3720.81 BogoMIPS).
PCI: Failed to allocate resource 0 for PCI device 1011:0018 (Digital
Equipment Corporation)
failed root[0:7ffffff] min[2200000] size[8000000]
failed res[8000000:7ffffff]
PCI: dev Digital Equipment Corporation KZPSA [KZPSA] type 64-bit
PCI: dev Digital Equipment Corporation KZPSA [KZPSA] type 64-bit
PCI: Failed to allocate resource 0 for PCI device 1011:0018 (Digital
Equipment Corporation)
failed root[200000000:207ffffff] min[2200000] size[20000000]
failed res[220000000:207ffffff]
PCI: Cannot find parent resource for device 02:00.0
Linux NET4.0 for Linux 2.3
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 32768 buckets, 512Kbytes
TCP: Hash tables configured (established 262144 bind 43690)
Starting kswapd v1.6
initialize_kbd: Keyboard reset failed, no ACK
pty: 256 Unix98 ptys configured
keyboard: Timeout - AT keyboard not present?
keyboard: Timeout - AT keyboard not present?
Floppy drive(s): fd0 is 2.88M
FDC 0 is a National Semiconductor PC87306
LVM version 0.8final by Heinz Mauelshagen (15/02/2000)
lvm -- Driver successfully initialized
qlogicisp : i/o region 0x0-0xff already in use
ncr53c8xx: at PCI bus 1, device 1, function 0
ncr53c8xx: 53c810 detected
ncr53c810-0: rev 0x2 on pci bus 1 device 1 function 0 irq 56
ncr53c810-0: ID 7, Fast-10, Parity Checking
ncr53c810-0: restart (scsi reset).
scsi0 : ncr53c8xx - version 3.3b
scsi : 1 host.
Vendor: DEC Model: RRD46 (C) DEC Rev: 0557
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 5, lun 0
scsi : detected 1 SCSI cdrom total.
ncr53c810-0-<5,0>: sync_msgout: 1-3-1-19-8.
ncr53c810-0-<5,0>: sync msgin: 1-3-1-19-8.
ncr53c810-0-<5,0>: sync: per=25 scntl3=0x10 ofs=8 fak=0 chg=0.
ncr53c810-0-<5,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
Uniform CD-ROM driver Revision: 3.11
Serial driver version 5.01 (2000-05-29) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
rtc: Digital UNIX epoch (1952) detected
Real Time Clock Driver v1.10c
Linux Tulip driver version 0.9.7 (June 17, 2000)
eth0: Digital DS21140 Tulip rev 32 at 0x8400, 00:00:F8:05:89:F3, IRQ 28.
eth0: EEPROM default media type Autosense.
eth0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1)
block.
eth0: MII transceiver #5 config 0000 status 780d advertising 01e1.
defxx.c:v1.05a 2000/06/11 Lawrence V. Stefani (stefani@lkg.dec.com) and
others
fddi0: DEFPA at I/O addr = 0x8000, IRQ = 24, Hardware addr =
00-00-F8-4A-E0-E5
buffer.c:45 spinlock stuck in kupdate at fffffc0000855624(3) owner
swapper at fffffc0000826934(0) sched.c:32
defxx: I/O range allocated to adapter (0x8400-0x847F) is already being
used!
kmem_create: Forcing size word alignment - nfs_fh
request_module[block-major-8]: Root fs not mounted
VFS: Cannot open root device "sdb1" or 08:11
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 08:11
--end boot log--
--show dev--
P00-ljohn>>> show dev
polling ncr0 (NCR 53C810) slot 1, bus 0 PCI, hose 1 ø SCSI Bus ID 7
dka500.5.0.1.1 DKA500 RRD46 0557
polling isp0 (QLogic ISP10X0) slot 0, bus 2 PCI, hose 1 SCSI Bus ID 7
dkb0.0.0.2000.1 DKB0 RZ1CB-CA LYJ0
dkb100.1.0.2000.1 DKB100 RZ1CF-CF 1614
dkb200.2.0.2000.1 DKB200 RZ1CB-CA LYJ0
polling pks0 (DEC KZPSA) slot 3, bus 0 PCI, hose 1
pkc.10.0.3.1 dkc TPwr 1 Fast 1 Bus ID 10 P01 A12
dkc100.1.0.3.1 DKC100 RZ1CB-CA LYJ0
dkc200.2.0.3.1 DKC200 RZ1CB-CS 0844
dkc300.3.0.3.1 DKC300 RZ1CB-CA LYJ0
dkc400.4.0.3.1 DKC400 RZ1CB-CA LYJ0
dkc500.5.0.3.1 DKC500 RZ1CB-CA LYJ0
dkc600.6.0.3.1 DKC600 RZ1CB-CA LYJ0
polling floppy0 (FLOPPY) PCEB - XBUS hose 0
dva0.0.0.1000.0 DVA0 RX23
polling pfi0 (DEC PCI FDDI) slot 4, bus 0 PCI, hose 1
fwa0.0.0.4.1 00-60-6D-D5-DB-07
polling pfi1 (DEC PCI FDDI) slot 4, bus 0 PCI, hose 0
fwb0.0.0.4.0 00-00-F8-4A-E0-E5
polling tulip0 (DECchip 21140-AA) slot 5, bus 0 PCI, hose 0
ewa0.0.0.5.0 00-00-F8-05-89-F3 Twisted-Pair
--end show dev--
--show conf--
P00-ljohn>>> show conf
Digital Equipment Corporation
AlphaServer 4100
Console V5.7-6 OpenVMS PALcode V1.21-2, Digital UNIX PALcode V1.23-2
Module Type Rev Name
System Motherboard 0 0000 mthrbrd0
Memory 2048 MB EDO 0 0000 mem0
Memory 2048 MB EDO 0 0000 mem1
CPU (4MB Cache) 3 0001 cpu0
CPU (4MB Cache) 3 0000 cpu1
Bridge (IOD0/IOD1) 600 0032 iod0/iod1
PCI Motherboard 8 0003 saddle0
CPU (4MB Cache) 3 0000 cpu2
CPU (4MB Cache) 3 0000 cpu3
Bus 0 iod0 (PCI0)
Slot Option Name Type Rev Name
1 PCEB 4828086 0015 pceb0
2 DEC PCI MC 181011 000E mc1
3 DEGPA-SA 112ae 0001 degpa0
4 DEC PCI FDDI f1011 0001 pfi1
5 DECchip 21140-AA 91011 0020 tulip0
Bus 1 pceb0 (EISA Bridge connected to iod0, slot 1)
Slot Option Name Type Rev Name
Bus 0 iod1 (PCI1)
Slot Option Name Type Rev Name
1 NCR 53C810 11000 0002 ncr0
2 PCI-PCI Bridge 11011 0002 pcb0
3 DEC KZPSA 81011 0000 pks0
4 DEC PCI FDDI f1011 0001 pfi0
5 DEC PCI MC 181011 0022 mc0
Bus 2 pcb0 (PCI-PCI Bridge connected to iod1, slot 2)
Slot Option Name Type Rev Name
0 QLogic ISP10X0 10201077 0002 isp0
--end show conf--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Jul 23 2000 - 21:00:11 EST