Re: DriveReady SeekComplete Error

From: Steven Walter (srwalter@yahoo.com)
Date: Mon Jul 24 2000 - 14:31:35 EST


On Mon, Jul 24, 2000 at 12:35:13PM +0200, Nerijus Baliunas wrote:
> hdb: IBM-DPTA-372050, ATA DISK drive
>
> hdb: 40088160 sectors (20525 MB) w/1961KiB Cache, CHS=2495/255/63, UDMA(33)
>
> Partition check:
> hda: hda1 hda2 hda3
> hdb: hdb1 hdb2 hdb3 hdb4
> hdc: [PTBL] [785/128/63] hdc1
>
> hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=6500389,
> sector=6452106
> end_request: I/O error, dev 03:42 (hdb), sector 6452106
> hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=6500389,
> sector=6452108
> end_request: I/O error, dev 03:42 (hdb), sector 6452108
> hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hdb: dma_intr: error=0x40 { UncorrectableError }, LBAsect=6500389,
> sector=6452110
> end_request: I/O error, dev 03:42 (hdb), sector 6452110
>
> Is it something I should worry about? kernel 2.4.0-test4.
>

I get very similar errors to these an a WDC84AA hard drive. They keep me
from using DMA at all, in fact. My errors are as follows:

hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
(those x6)
hda: DMA disabled
ide0: reset: success

Hope this is useful to someone. My IDE chipset is a SIS5513.

-- 
Steven Walter
<srwalter@yahoo.com>

"Taking my gun away because I might shoot someone is like cutting my tongue out because I might yell `Fire!' in a crowded theater." -- Peter Venetoklis

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Mon Jul 31 2000 - 21:00:17 EST