Steven Walter <srwalter@yahoo.com> wrote:
>I get very similar errors to these an a WDC84AA hard drive. They keep me
>from using DMA at all, in fact. My errors are as follows:
>
>hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
>hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
>(those x6)
>hda: DMA disabled
>ide0: reset: success
>
>Hope this is useful to someone. My IDE chipset is a SIS5513.
I had similar problems here, until I switched *off* UDMA in the BIOS:
|Uniform Multi-Platform E-IDE driver Revision: 6.30
|SIS5513: IDE controller on PCI bus 00 dev 09
|SIS5513: not 100% native mode: will probe irqs later
|SiS5597
| ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:pio, hdb:pio
| ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio
|hda: QUANTUM FIREBALLlct08 17, ATA DISK drive
|ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
|hda: QUANTUM FIREBALLlct08 17, 16555MB w/418kB Cache,CHS=33637/16/63, UDMA(33)
|00:01.1 IDE interface: Silicon Integrated Systems [SiS] 5513 (rev d0)
Peter
--
_ x ___ p.steiner@t-online.de (Peter Steiner)
/ \_/_\_ /,--' Linux User #55148 (http://counter.li.org/)
\/>'~~~~//
\_____/ perl -e'while(<>){s/=\n//g;s/=([\dA-F]{2})/chr(hex($1))/eg;print;}'
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Jul 31 2000 - 21:00:20 EST