Alan Cox wrote:
> I'd rather keep the existing initialisation behaviour of using the eeprom
> for 2.2. There are also some power management cases where I am not sure
> the values are restored on the pcnet/pci.
>
> For 2.2 conservatism is the key. For 2.4 by all means default to CSR12-14 and
> print a warning if they dont match the eeprom value and we'll see what it
> shows
>
> > Alan, do you want me to put your inline version in <linux/etherdevice.h>
> > while I'm at it, or what?
>
> Sure
Here is the 2.2.18 patch... I'll send the 2.4.1 patch shortly.
This one still uses the PROM since we are going for least change in
initialization.
is_valid_ether_addr() is static inline in <linux/etherdevice.h>
Is this one satisfactory?
Eli
--------------------. Rule of Accuracy: When working toward
Eli Carter | the solution of a problem, it always
eli.carter@inet.com `--------------------- helps if you know the answer.
--- linux/drivers/net/pcnet32.c 2001/01/20 11:10:30 1.1.1.6
+++ linux/drivers/net/pcnet32.c 2001/02/15 19:08:55
@@ -648,10 +648,33 @@
printk(KERN_INFO "%s: %s at %#3lx,", dev->name, chipname, ioaddr);
- /* There is a 16 byte station address PROM at the base address.
- The first six bytes are the station address. */
- for (i = 0; i < 6; i++)
- printk(" %2.2x", dev->dev_addr[i] = inb(ioaddr + i));
+ /* In most chips, there is a station address PROM at the base address.
+ * However, if that does not have a valid address, try the "Physical
+ * Address Registers" CSR12-CSR14
+ */
+ {
+ /* There is a 16 byte station address PROM at the base address.
+ The first six bytes are the station address. */
+ for (i = 0; i < 6; i++) {
+ dev->dev_addr[i] = inb(ioaddr + i);
+ }
+ if( !is_valid_ether_addr(dev->dev_addr) ) {
+ /* also double check this station address */
+ for (i = 0; i < 3; i++) {
+ unsigned int val;
+ val = a->read_csr(ioaddr, i+12) & 0x0ffff;
+ /* There may be endianness issues here. */
+ dev->dev_addr[2*i] = val & 0x0ff;
+ dev->dev_addr[2*i+1] = (val >> 8) & 0x0ff;
+ }
+ /* if this is not valid either, force to 00:00:00:00:00:00 */
+ if( !is_valid_ether_addr(dev->dev_addr) )
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i]=0;
+ }
+ for (i = 0; i < 6; i++)
+ printk(" %2.2x", dev->dev_addr[i] );
+ }
if (((chip_version + 1) & 0xfffe) == 0x2624) { /* Version 0x2623 or 0x2624 */
i = a->read_csr(ioaddr, 80) & 0x0C00; /* Check tx_start_pt */
@@ -796,6 +819,10 @@
lp->shared_irq ? SA_SHIRQ : 0, lp->name, (void *)dev)) {
return -EAGAIN;
}
+
+ /* Check for a valid station address */
+ if( !is_valid_ether_addr(dev->dev_addr) )
+ return -EINVAL;
/* Reset the PCNET32 */
lp->a.reset (ioaddr);
--- linux/include/linux/etherdevice.h 2001/01/19 19:25:31 1.1.1.1
+++ linux/include/linux/etherdevice.h 2001/02/15 19:08:55
@@ -51,6 +51,14 @@
unsigned char *src, int length, int base);
#endif
+/* Check that the ethernet address (MAC) is not 00:00:00:00:00:00 and is not
+ * a multicast address. Return true if the address is valid.
+ */
+static __inline__ int is_valid_ether_addr( u8 *addr )
+{
+ return !(addr[0]&1) && memcmp( addr, "\0\0\0\0\0\0", 6);
+}
+
#endif
#endif /* _LINUX_ETHERDEVICE_H */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Feb 15 2001 - 21:00:27 EST