2.4.4-p1 is the kernel version that i've tried now. no succes with 2.4.3 and
below.
i've been trying without the CDROM and a normal HDD ata 66. i've made some
progress using the normal ide ata 66 driver and removing the osv4 from
kernel.
root@light:/# hdparm -t -T /dev/hda
/dev/hda:
Timing buffer-cache reads: 128 MB in 0.81 seconds =158.02 MB/sec
Timing buffered disk reads: MB in 8.41 seconds = 7.61 MB/sec
root@light:/# hdparm -v /dev/hda
/dev/hda:
multcount = 16 (on)
I/O support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
nowerr = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 2586/240/63, sectors = 39102336, start = 0
still my bios is set to enhaced DMA. i am still working on UDMA. if u have
any suggestions i still wait for a solution.
axl
----- Original Message -----
From: "Mark Hahn" <hahn@coffee.psychology.mcmaster.ca>
To: "Alexandru Barloiu Nicolae" <axl@light.kappa.ro>
Sent: Tuesday, April 10, 2001 1:39 AM
Subject: Re: Compaq proliant ML-350 - IDE & SCSI
> > ServerWorks OSB4: IDE controller on PCI bus 00 dev 79
>
> ugh. not a widely-respected implementation. I don't think you mentioned
> which kernel you're runnint, either, since there have been several
successive
> generations of workarounds for SW ide/etc stuff.
>
> > hda: WDC WD200EB-00BHF0, ATA DISK drive
> > hdb: Compaq CRD-8402B, ATAPI CD/DVD-ROM drive
>
> sharing a channel like this is not a good idea. you should definitely
> test without the cdrom drive. all your ide cables are 18" or less?
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Apr 15 2001 - 21:00:12 EST