> through these messages when using the *original* ATA cable (never touched
> before) or a replacement one:
>
> hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
CRC error -> cable/wiring problem. If you are using UDMA66/100 you must
have an 80pin cable. If you are using UDMA33 and can't pin it down then
an 80pin cable doesnt do any harm
Alan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Feb 23 2002 - 21:00:38 EST