On Fri Feb 22, 2002 at 18:04:29 +0100, Stephan von Krawczynski wrote:
> Your config is not identical to the one I sent. If you want to find
> out what the problem is, you must first try to produce a setup that is
> known good. So simply use my config, even if it contains stuff you
> don't need, and especially if it does not contain stuff you want.
> Your primary goal is: let the box boot.
Yours (+serial console) doesn't work either, so I stripped out most
unneeded things. I'm going to rip out all cards except net and graphics
to see if that helps but that has to wait till Monday...
BTW: I just got this:
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 937.5536 MHz.
..... host bus clock speed is 133.9358 MHz.
cpu: 0, clocks: 1339358, slice: 446452
CPU0<T0:1339344,T1:892880,D:12,S:446452,C:1339358>
cpu: 1, clocks: 1339358, slice: 446452
CPU1<T0:1339344,T1:446432,D:8,S:446452,C:1339358>
checking TSC synchronization across CPUs:
BIOS BUG: CPU#0 improperly initialized, has -6 usecs TSC skew! FIXED.
BIOS BUG: CPU#1 improperly initialized, has 6 usecs TSC skew! FIXED.
Waiting on wait_init_idle (map = 0x
Maybe this means something...
Adam
-- Adam adam@os.inf.tu-dresden.de Lackorzynski http://a.home.dhs.org - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Feb 23 2002 - 21:00:43 EST