Two cases one HighPoint the other Promise.
See how they play games with device locations?
[root@autobuild root]# lspci
00:00.0 Host bridge: ServerWorks CNB20LE Host Bridge (rev 06)
00:00.1 Host bridge: ServerWorks CNB20LE Host Bridge (rev 06)
00:01.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
00:03.0 RAID bus controller: Promise Technology, Inc. 20267 (rev 02)
00:04.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
00:05.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 50)
00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller
00:0f.2 USB Controller: ServerWorks OSB4/CSB5 USB Controller (rev 04)
[root@autobuild root]#
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PDC20267: IDE controller on PCI bus 00 dev 18
PDC20267: chipset revision 2
PDC20267: not 100% native mode: will probe irqs later
PDC20267: ROM enabled at 0xfeae0000
(U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER Mode.
ide0: BM-DMA at 0xdf00-0xdf07, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xdf08-0xdf0f, BIOS settings: hdc:pio, hdd:pio
SvrWks OSB4: IDE controller on PCI bus 00 dev 79
SvrWks OSB4: chipset revision 0
SvrWks OSB4: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0xffa0-0xffa7, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdg:pio, hdh:pio
hda: IBM-DPTA-373420, ATA DISK drive
hdc: IBM-DPTA-373420, ATA DISK drive
hde: CW038D ATAPI CD-R/RW, ATAPI CD/DVD-ROM drive
ide0 at 0xdfe0-0xdfe7,0xdfae on irq 31
ide1 at 0xdfa0-0xdfa7,0xdfaa on irq 31
ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
bp6:~ # lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
(rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
00:0d.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev 20)
00:0f.0 VGA compatible controller: S3 Inc. 86c988 [ViRGE/VX] (rev 02)
00:13.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366 (rev 01)
00:13.1 Unknown mass storage controller: Triones Technologies, Inc. HPT366 (rev 01)
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
HPT366: onboard version of chipset, pin1=1 pin2=2
PCI: HPT366: Fixing interrupt 18 pin 2 to ZERO
HPT366: IDE controller on PCI bus 00 dev 98
HPT366: chipset revision 1
HPT366: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio
HPT366: IDE controller on PCI bus 00 dev 99
HPT366: chipset revision 1
HPT366: not 100% native mode: will probe irqs later
ide1: BM-DMA at 0xec00-0xec07, BIOS settings: hdc:DMA, hdd:pio
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: device not capable of full native PCI mode
PIIX4: device disabled (BIOS)
PIIX4: device disabled (BIOS)
hda: DupliDisk IDE RAID-1 Adapter( 1.19), ATA DISK drive
hdc: QUANTUM FIREBALLP KA13.6, ATA DISK drive
ide2: ports already in use, skipping probe
ide0 at 0xd800-0xd807,0xdc02 on irq 18
ide1 at 0xe400-0xe407,0xe802 on irq 18
hda: setmax LBA 18041184, native 18039168
hda: DupliDisk IDE RAID-1 Adapter( 1.19), 8808MB w/371kB Cache, CHS=17896/16/63, UDMA(33)
hdc: QUANTUM FIREBALLP KA13.6, 13217MB w/371kB Cache, CHS=26853/16/63, UDMA(33)
Andre Hedrick
LAD Storage Consulting Group
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Aug 15 2002 - 22:00:17 EST