On 8 Aug 02 at 10:41, Andre Hedrick wrote:
> ide0 at 0xdfe0-0xdfe7,0xdfae on irq 31
> ide1 at 0xdfa0-0xdfa7,0xdfaa on irq 31
> ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
This is definitely bug. It should assigned ide0 to the port
in legacy mode, as far as I can tell.
> PIIX4: IDE controller on PCI bus 00 dev 39
> PIIX4: device not capable of full native PCI mode
> PIIX4: device disabled (BIOS)
> PIIX4: device disabled (BIOS)
> hda: DupliDisk IDE RAID-1 Adapter( 1.19), ATA DISK drive
> hdc: QUANTUM FIREBALLP KA13.6, ATA DISK drive
> ide2: ports already in use, skipping probe
> ide0 at 0xd800-0xd807,0xdc02 on irq 18
> ide1 at 0xe400-0xe407,0xe802 on irq 18
You have disabled PIIX4 here, so ide0/1 were not reserved. I assume
that if you enable PIIX4, it will use legacy ports, and will become
ide0/1.
Petr Vandrovec
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Aug 15 2002 - 22:00:17 EST