On Thu, 8 Aug 2002, Petr Vandrovec wrote:
> On 8 Aug 02 at 10:41, Andre Hedrick wrote:
>
> > ide0 at 0xdfe0-0xdfe7,0xdfae on irq 31
> > ide1 at 0xdfa0-0xdfa7,0xdfaa on irq 31
> > ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
>
> This is definitely bug. It should assigned ide0 to the port
> in legacy mode, as far as I can tell.
Again you have no experience in the logic!
This boots with Promise first because of BIOS Logic with INT19 hooks.
IE, that which I referenced in the documents that I know you did not read
but come back and state it has nothing to do with the issues.
> > PIIX4: IDE controller on PCI bus 00 dev 39
> > PIIX4: device not capable of full native PCI mode
> > PIIX4: device disabled (BIOS)
> > PIIX4: device disabled (BIOS)
> > hda: DupliDisk IDE RAID-1 Adapter( 1.19), ATA DISK drive
> > hdc: QUANTUM FIREBALLP KA13.6, ATA DISK drive
> > ide2: ports already in use, skipping probe
> > ide0 at 0xd800-0xd807,0xdc02 on irq 18
> > ide1 at 0xe400-0xe407,0xe802 on irq 18
>
> You have disabled PIIX4 here, so ide0/1 were not reserved. I assume
ASS U ME that is the word!
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
HPT366: onboard version of chipset, pin1=1 pin2=2
HPT366: IDE controller on PCI bus 00 dev 98
PCI: Enabling device 00:13.0 (0005 -> 0007)
HPT366: chipset revision 1
HPT366: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio
HPT366: IDE controller on PCI bus 00 dev 99
HPT366: chipset revision 1
HPT366: not 100% native mode: will probe irqs later
ide1: BM-DMA at 0xec00-0xec07, BIOS settings: hdc:DMA, hdd:pio
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0xf000-0xf007, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xf008-0xf00f, BIOS settings: hdg:pio, hdh:pio
hda: DupliDisk IDE RAID-1 Adapter( 1.19), ATA DISK drive
hdc: QUANTUM FIREBALLP KA13.6, ATA DISK drive
ide0 at 0xd800-0xd807,0xdc02 on irq 18
ide1 at 0xe400-0xe407,0xe802 on irq 18
What do you need me to attach a device?
The FSCKING BIOS did this, because there is an option to boot UDMA66
first.
> that if you enable PIIX4, it will use legacy ports, and will become
> ide0/1.
> Petr Vandrovec
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
Electrons wasted :-/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Aug 15 2002 - 22:00:17 EST