Hi,
On Wed, 4 Dec 2002, Adrian Bunk wrote:
> In drivers/acpi/Config.in in 2.5.44:
>
> <-- snip -->
>
> ...
> if [ "$CONFIG_ACPI_HT_ONLY" != "y" ]; then
> bool ' Sleep States' CONFIG_ACPI_SLEEP
> ...
> define_bool CONFIG_ACPI_SLEEP $CONFIG_SOFTWARE_SUSPEND
> ...
> fi
> ...
>
> <-- snip -->
>
>
> This double definition was at least confusing, a simple
>
> dep_bool ' Sleep States' CONFIG_ACPI_SLEEP $CONFIG_SOFTWARE_SUSPEND
>
> would have expressed it better.
It's not really the same and the first probably heavily confuses xconfig.
If CONFIG_SOFTWARE_SUSPEND can do without CONFIG_ACPI_SLEEP, the second
version should work fine.
> config ACPI_SLEEP
> bool "Sleep States"
> - depends on X86 && ACPI && !ACPI_HT_ONLY
> + depends on X86 && ACPI && !ACPI_HT_ONLY && SOFTWARE_SUSPEND
> default SOFTWARE_SUSPEND
> ---help---
> This option adds support for ACPI suspend states.
The default is probably not needed anymore.
> Another thing that seems to be suboptimal is that the question for
> SOFTWARE_SUSPEND comes _after_ the question for ACPI_SLEEP, IOW someone
> doing a "make config" to configure his kernel doesn't have a chance to
> select ACPI_SLEEP.
That was only true with the old "make config". :)
> To fix this (and it seems to be logical) the
> SOFTWARE_SUSPEND question should be moved to the "Power management
> options" menu. The patch below tries to solve this and it makes ACPI
> dependant on PM as the comments in PM indicate:
> - move "Software Suspend" to the "Power management options" menu above
> the ACPI entry
> - let ACPI depend on PM
Is ACPI really only a PM thingie?
Anyway, I had a cleaned up drivers/acpi/Kconfig lying around. The ACPI
config file was not really easy to convert automatically. I integrated
your change from above, it would be nice if some could check if every
still works as it should.
bye, Roman
--- linux/drivers/acpi/Kconfig 31 Oct 2002 13:26:48 -0000 1.1.1.1
+++ linux/drivers/acpi/Kconfig 4 Dec 2002 20:12:43 -0000
@@ -35,9 +35,11 @@ config ACPI
available at:
<http://www.acpi.info>
+if ACPI
+
config ACPI_HT_ONLY
bool "CPU Enumeration Only"
- depends on X86 && ACPI && X86_LOCAL_APIC
+ depends on X86_LOCAL_APIC
---help---
This option enables limited ACPI support -- just enough to
enumerate processors from the ACPI Multiple APIC Description
@@ -51,15 +53,12 @@ config ACPI_HT_ONLY
There is no command-line option to disable this, but the kernel
will fall back to the MPS table if the MADT is not present.
-config ACPI_BOOT
- bool
- depends on IA64 && (!IA64_HP_SIM || IA64_SGI_SN) || X86 && ACPI && !ACPI_HT_ONLY || X86 && ACPI
- default y
+
+if X86 && !ACPI_HT_ONLY || IA64 && !IA64_HP_SIM
config ACPI_SLEEP
bool "Sleep States"
- depends on X86 && ACPI && !ACPI_HT_ONLY
- default SOFTWARE_SUSPEND
+ depends on X86 && SOFTWARE_SUSPEND
---help---
This option adds support for ACPI suspend states.
@@ -78,7 +77,7 @@ config ACPI_SLEEP
config ACPI_AC
tristate "AC Adapter"
- depends on X86 && ACPI && !ACPI_HT_ONLY
+ depends on X86
help
This driver adds support for the AC Adapter object, which indicates
whether a system is on AC, or not. Typically, only mobile systems
@@ -86,7 +85,7 @@ config ACPI_AC
config ACPI_BATTERY
tristate "Battery"
- depends on X86 && ACPI && !ACPI_HT_ONLY
+ depends on X86
help
This driver adds support for battery information through
/proc/acpi/battery. If you have a mobile system with a battery,
@@ -94,7 +93,6 @@ config ACPI_BATTERY
config ACPI_BUTTON
tristate "Button"
- depends on IA64 && !IA64_HP_SIM || X86 && ACPI && !ACPI_HT_ONLY
help
This driver registers for events based on buttons, such as the
power, sleep, and lid switch. In the future, a daemon will read
@@ -104,14 +102,12 @@ config ACPI_BUTTON
config ACPI_FAN
tristate "Fan"
- depends on IA64 && !IA64_HP_SIM || X86 && ACPI && !ACPI_HT_ONLY
help
This driver adds support for ACPI fan devices, allowing user-mode
applications to perform basic fan control (on, off, status).
config ACPI_PROCESSOR
tristate "Processor"
- depends on IA64 && !IA64_HP_SIM || X86 && ACPI && !ACPI_HT_ONLY
help
This driver installs ACPI as the idle handler for Linux, and uses
ACPI C2 and C3 processor states to save power, on systems that
@@ -119,7 +115,7 @@ config ACPI_PROCESSOR
config ACPI_PROCESSOR_PERF
bool "Processor Performance States"
- depends on X86 && ACPI && !ACPI_HT_ONLY && ACPI_PROCESSOR && CPU_FREQ
+ depends on X86 && ACPI_PROCESSOR && CPU_FREQ
help
This driver adds support for CPU frequency scaling, if this is supported
by the hardware and the BIOS. If you are compiling for a mobile system,
@@ -135,12 +131,12 @@ config ACPI_THERMAL
may be damaged without it.
config ACPI_NUMA
- bool "NUMA support" if NUMA && (IA64 && !IA64_HP_SIM || X86 && ACPI && !ACPI_HT_ONLY)
- default y if IA64 && IA64_SGI_SN
+ bool "NUMA support"
+ depends on NUMA
config ACPI_TOSHIBA
tristate "Toshiba Laptop Extras"
- depends on X86 && ACPI && !ACPI_HT_ONLY
+ depends on X86
---help---
This driver adds support for access to certain system settings
on "legacy free" Toshiba laptops. These laptops can be recognized by
@@ -166,7 +162,6 @@ config ACPI_TOSHIBA
config ACPI_DEBUG
bool "Debug Statements"
- depends on IA64 && !IA64_HP_SIM || X86 && ACPI && !ACPI_HT_ONLY
help
The ACPI driver can optionally report errors with a great deal
of verbosity. Saying Y enables these statements. This will increase
@@ -174,17 +169,15 @@ config ACPI_DEBUG
config ACPI_BUS
bool
- depends on IA64 && !IA64_HP_SIM || X86 && ACPI && !ACPI_HT_ONLY
default y
config ACPI_INTERPRETER
bool
- depends on IA64 && !IA64_HP_SIM || X86 && ACPI && !ACPI_HT_ONLY
default y
config ACPI_EC
bool
- depends on X86 && ACPI && !ACPI_HT_ONLY
+ depends on X86
default y
help
This driver is required on some systems for the proper operation of
@@ -193,26 +186,35 @@ config ACPI_EC
config ACPI_POWER
bool
- depends on IA64 && !IA64_HP_SIM || X86 && ACPI && !ACPI_HT_ONLY
default y
config ACPI_PCI
bool
- depends on IA64 && !IA64_HP_SIM || X86 && ACPI && !ACPI_HT_ONLY
default PCI
config ACPI_SYSTEM
bool
- depends on IA64 && !IA64_HP_SIM || X86 && ACPI && !ACPI_HT_ONLY
default y
help
This driver will enable your system to shut down using ACPI, and
dump your ACPI DSDT table using /proc/acpi/dsdt.
+endif
+
+config ACPI_NUMA
+ depends IA64 && IA64_SGI_SN
+ default y
+
config ACPI_EFI
bool
depends on IA64 && (!IA64_HP_SIM || IA64_SGI_SN)
default y
+
+config ACPI_BOOT
+ bool
+ default y
+
+endif
endmenu
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Dec 07 2002 - 22:00:20 EST