Re: [Lse-tech] Re: 2.6.0-test9-mjb1

[Jeff Garzik]

Dave Hansen wrote:
> On Thu, 2003-10-30 at 12:17, Jeff Garzik wrote:
>
> > Martin J. Bligh wrote:
> >
> > > e1000 fixes
> >
> > Um...   any e1000 fixes you have, please forward them to me and Intel 
> > rather than letting them languish in a tree.
>
>
> There aren't any in there right now.  The patches that Martin is
> referring to were probably a couple from Anton that got fixed and merged
> long, long ago.  There's one that we keep around for ppc64, but it's not
> applicable to any other architectures and it's not really mainline
> material anyway.  


well, there's still this patch...
--- ./drivers/net/e1000/e1000_hw.c.orig	2003-10-30 09:29:52.000000000 -0500
+++ ./drivers/net/e1000/e1000_hw.c	2003-10-30 09:30:39.000000000 -0500
@@ -4522,8 +4522,8 @@ uint32_t
 e1000_read_reg_io(struct e1000_hw *hw,
                   uint32_t offset)
 {
-    uint32_t io_addr = hw->io_base;
-    uint32_t io_data = hw->io_base + 4;
+    unsigned long io_addr = hw->io_base;
+    unsigned long io_data = hw->io_base + 4;
 
     e1000_io_write(hw, io_addr, offset);
     return e1000_io_read(hw, io_data);
@@ -4542,8 +4542,8 @@ e1000_write_reg_io(struct e1000_hw *hw,
                    uint32_t offset,
                    uint32_t value)
 {
-    uint32_t io_addr = hw->io_base;
-    uint32_t io_data = hw->io_base + 4;
+    unsigned long io_addr = hw->io_base;
+    unsigned long io_data = hw->io_base + 4;
 
     e1000_io_write(hw, io_addr, offset);
     e1000_io_write(hw, io_data, value);
--- ./drivers/net/e1000/e1000_hw.h.orig	2003-10-30 09:30:48.000000000 -0500
+++ ./drivers/net/e1000/e1000_hw.h	2003-10-30 09:32:04.000000000 -0500
@@ -317,9 +317,9 @@ void e1000_pci_clear_mwi(struct e1000_hw
 void e1000_read_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value);
 void e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value);
 /* Port I/O is only supported on 82544 and newer */
-uint32_t e1000_io_read(struct e1000_hw *hw, uint32_t port);
+uint32_t e1000_io_read(struct e1000_hw *hw, unsigned long port);
 uint32_t e1000_read_reg_io(struct e1000_hw *hw, uint32_t offset);
-void e1000_io_write(struct e1000_hw *hw, uint32_t port, uint32_t value);
+void e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value);
 void e1000_write_reg_io(struct e1000_hw *hw, uint32_t offset, uint32_t value);
 int32_t e1000_config_dsp_after_link_change(struct e1000_hw *hw, boolean_t link_up);
 int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active);
@@ -978,7 +978,7 @@ struct e1000_hw {
     e1000_ms_type master_slave;
     e1000_ms_type original_master_slave;
     e1000_ffe_config ffe_config_state;
-    uint32_t io_base;
+    unsigned long io_base;
     uint32_t phy_id;
     uint32_t phy_revision;
     uint32_t phy_addr;
--- ./drivers/net/e1000/e1000_main.c.orig	2003-10-30 09:32:12.000000000 -0500
+++ ./drivers/net/e1000/e1000_main.c	2003-10-30 09:32:39.000000000 -0500
@@ -2621,13 +2621,13 @@ e1000_write_pci_cfg(struct e1000_hw *hw,
 }
 
 uint32_t
-e1000_io_read(struct e1000_hw *hw, uint32_t port)
+e1000_io_read(struct e1000_hw *hw, unsigned long port)
 {
 	return inl(port);
 }
 
 void
-e1000_io_write(struct e1000_hw *hw, uint32_t port, uint32_t value)
+e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value)
 {
 	outl(value, port);
 }