Re: ide-scsi and SMP does not work together.

[Mikael Pettersson]

Klaus Umbach writes:
 > Hello Support Center :-)
 > 
 > Since I have 2 CPUs on my mainboard and compiled the SMP-support in, I
 > cannot use ide-scsi anymore. I guess it must have something to do with
 > apic, because when I use "Local APIC support on uniprocessors", I have
 > the same problem. With no SMP and no local APIC everything works fine.
 > (except the second CPU, of course). Normal ide-cdrom support works, but
 > recording CDs over atapi is not really what I want at the moment.
 > 
 > Mainboard: MSI 694D pro
 > 
 > 00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 10)

SMP by default uses the I/O-APIC, and may (depending on kernel version
and .config) also use ACPI, which in turn may trigger ACPI-controlled
PCI IRQ routing.

Try "acpi=off", "pci=noacpi" (or however that don't-use-ACPI-for-PCI
option is spelled), and "noapic" (don't use I/O-APIC).

/Mikael
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/