Re: [PATCH] i2o_core.c, i2o_scsi.c minor bugfixes
From: Markus Lidel
Date: Tue Jan 20 2004 - 03:53:38 EST
Hello,
Andrew Morton wrote:
i2o-cleanup.patch:
I get 100% rejects applying this. Could you resend it as an attachment?
Okey, another try, this time as attachment.
--- drivers/message/i2o.old/i2o_core.c 2004-01-17 22:47:00.000000000 +0100
+++ drivers/message/i2o/i2o_core.c 2004-01-17 23:34:43.866973586 +0100
Also, this renaming arrangement breaks my scripts (at least). Preferable
would be:
--- a/drivers/message/i2o/i2o_core.c
+++ b/drivers/message/i2o/i2o_core.c
Good to know, i hopefully fixed that, too.
maintainer for those module, i wrote to the kernel mailing list. Can
anybody tell me, who i can contact to verify if my changes are of any
value? I want to contribute some more code, because on my system the
i2o_block doesn't work too. But before, i want to be sure that my code is
needed and also is good enough to be included into the kernel.
I think that would be Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Thank you very much for your help!
Best regards,
Markus Lidel
------------------------------------------
Markus Lidel (Senior IT Consultant)
Shadow Connect GmbH
Carl-Reisch-Weg 12
D-86381 Krumbach
Germany
Phone: +49 82 82/99 51-0
Fax: +49 82 82/99 51-11
E-Mail: Markus.Lidel@xxxxxxxxxxxxxxxxx
URL: http://www.shadowconnect.com
diff -ur drivers/message/i2o.old/i2o_core.c drivers/message/i2o/i2o_core.c
--- a/drivers/message/i2o/i2o_core.c 2004-01-17 22:47:00.000000000 +0100
+++ b/drivers/message/i2o/i2o_core.c 2004-01-17 23:34:43.866973586 +0100
@@ -502,6 +502,7 @@
c->unit = i;
c->page_frame = NULL;
c->hrt = NULL;
+ c->hrt_len = 0;
c->lct = NULL;
c->status_block = NULL;
sprintf(c->name, "i2o/iop%d", i);
@@ -885,7 +885,7 @@
unsigned long flags;
daemonize("i2oevtd");
- allow_signal(SIGKILL);
+ allow_signal(SIGTERM);
evt_running = 1;
@@ -1052,7 +1052,7 @@
void *tmp;
daemonize("iop%d_lctd", c->unit);
- allow_signal(SIGKILL);
+ allow_signal(SIGTERM);
c->lct_running = 1;
@@ -1861,31 +1862,39 @@
{
u32 msg[6];
int ret, size = sizeof(i2o_hrt);
+ int loops = 3; /* we only try 3 times to get the HRT, this should be
+ more then enough. Worst case should be 2 times.*/
/* First read just the header to figure out the real size */
do {
+ /* first we allocate the memory for the HRT */
if (c->hrt == NULL) {
c->hrt=pci_alloc_consistent(c->pdev, size, &c->hrt_phys);
if (c->hrt == NULL) {
printk(KERN_CRIT "%s: Hrt Get failed; Out of memory.\n", c->name);
return -ENOMEM;
}
+ c->hrt_len = size;
}
msg[0]= SIX_WORD_MSG_SIZE| SGL_OFFSET_4;
msg[1]= I2O_CMD_HRT_GET<<24 | HOST_TID<<12 | ADAPTER_TID;
msg[3]= 0;
- msg[4]= (0xD0000000 | size); /* Simple transaction */
+ msg[4]= (0xD0000000 | c->hrt_len); /* Simple transaction */
msg[5]= c->hrt_phys; /* Dump it here */
- ret = i2o_post_wait_mem(c, msg, sizeof(msg), 20, c->hrt, NULL, c->hrt_phys, 0, size, 0);
+ ret = i2o_post_wait_mem(c, msg, sizeof(msg), 20, c->hrt, NULL, c->hrt_phys, 0, c->hrt_len, 0);
if(ret == -ETIMEDOUT)
{
- /* The HRT block we used is in limbo somewhere. When the iop wakes up
- we will recover it */
+ /* The HRT block we used is in limbo somewhere. When the
+ iop wakes up we will recover it */
+ /* FIX: shouldn't we cleanup the memory?
+ pci_free_consistent(c->pdev, c->hrt_len, c->hrt, c->hrt_phys);
+ */
c->hrt = NULL;
+ c->hrt_len = 0;
return ret;
}
@@ -1896,13 +1905,20 @@
return ret;
}
- if (c->hrt->num_entries * c->hrt->entry_len << 2 > size) {
- int new_size = c->hrt->num_entries * c->hrt->entry_len << 2;
- pci_free_consistent(c->pdev, size, c->hrt, c->hrt_phys);
- size = new_size;
+ if (c->hrt->num_entries * c->hrt->entry_len << 2 > c->hrt_len) {
+ size = c->hrt->num_entries * c->hrt->entry_len << 2;
+ pci_free_consistent(c->pdev, c->hrt_len, c->hrt, c->hrt_phys);
+ c->hrt_len = 0;
c->hrt = NULL;
}
- } while (c->hrt == NULL);
+ loops --;
+ } while (c->hrt == NULL && loops > 0);
+
+ if(c->hrt == NULL)
+ {
+ printk(KERN_ERR "%s: Unable to get HRT after three tries, giving up\n", c->name);
+ return -1;
+ }
i2o_parse_hrt(c); // just for debugging
@@ -3737,13 +3737,12 @@
printk("Terminating i2o threads...");
stat = kill_proc(evt_pid, SIGTERM, 1);
if(!stat) {
- printk("waiting...");
+ printk("waiting...\n");
wait_for_completion(&evt_dead);
}
printk("done.\n");
}
i2o_remove_handler(&i2o_core_handler);
- unregister_reboot_notifier(&i2o_reboot_notifier);
}
module_init(i2o_core_init);
diff -ur drivers/message/i2o.old/i2o_scsi.c drivers/message/i2o/i2o_scsi.c
--- a/drivers/message/i2o/i2o_scsi.c 2004-01-17 22:47:00.000000000 +0100
+++ b/drivers/message/i2o/i2o_scsi.c 2004-01-17 23:33:25.323830216 +0100
@@ -66,7 +66,13 @@
#define VERSION_STRING "Version 0.1.2"
-#define dprintk(x)
+//#define DRIVERDEBUG
+
+#ifdef DRIVERDEBUG
+#define dprintk(s, args...) printk(s, ## args)
+#else
+#define dprintk(s, args...)
+#endif
#define I2O_SCSI_CAN_QUEUE 4
#define MAXHOSTS 32
@@ -252,15 +259,15 @@
as=(u8)le32_to_cpu(m[4]>>8);
st=(u8)le32_to_cpu(m[4]>>24);
- dprintk(("i2o got a scsi reply %08X: ", m[0]));
- dprintk(("m[2]=%08X: ", m[2]));
- dprintk(("m[4]=%08X\n", m[4]));
+ dprintk(KERN_INFO "i2o got a scsi reply %08X: ", m[0]);
+ dprintk(KERN_INFO "m[2]=%08X: ", m[2]);
+ dprintk(KERN_INFO "m[4]=%08X\n", m[4]);
if(m[2]&0x80000000)
{
if(m[2]&0x40000000)
{
- dprintk(("Event.\n"));
+ dprintk(KERN_INFO "Event.\n");
lun_done=1;
return;
}
@@ -280,12 +287,12 @@
if(current_command==NULL)
{
if(st)
- dprintk(("SCSI abort: %08X", m[4]));
- dprintk(("SCSI abort completed.\n"));
+ dprintk(KERN_WARNING "SCSI abort: %08X", m[4]);
+ dprintk(KERN_INFO "SCSI abort completed.\n");
return;
}
- dprintk(("Completed %ld\n", current_command->serial_number));
+ dprintk(KERN_INFO "Completed %ld\n", current_command->serial_number);
atomic_dec(&queue_depth);
@@ -308,7 +315,7 @@
{
/* An error has occurred */
- dprintk((KERN_DEBUG "SCSI error %08X", m[4]));
+ dprintk(KERN_WARNING "SCSI error %08X", m[4]);
if (as == 0x0E)
/* SCSI Reset */
@@ -368,7 +375,7 @@
*lun=reply[1];
- dprintk(("SCSI (%d,%d)\n", *target, *lun));
+ dprintk(KERN_INFO "SCSI (%d,%d)\n", *target, *lun);
return 0;
}
@@ -401,8 +408,8 @@
for(unit=c->devices;unit!=NULL;unit=unit->next)
{
- dprintk(("Class %03X, parent %d, want %d.\n",
- unit->lct_data.class_id, unit->lct_data.parent_tid, d->lct_data.tid));
+ dprintk(KERN_INFO "Class %03X, parent %d, want %d.\n",
+ unit->lct_data.class_id, unit->lct_data.parent_tid, d->lct_data.tid);
/* Only look at scsi and fc devices */
if ( (unit->lct_data.class_id != I2O_CLASS_SCSI_PERIPHERAL)
@@ -411,19 +418,19 @@
continue;
/* On our bus ? */
- dprintk(("Found a disk (%d).\n", unit->lct_data.tid));
+ dprintk(KERN_INFO "Found a disk (%d).\n", unit->lct_data.tid);
if ((unit->lct_data.parent_tid == d->lct_data.tid)
|| (unit->lct_data.parent_tid == d->lct_data.parent_tid)
)
{
u16 limit;
- dprintk(("Its ours.\n"));
+ dprintk(KERN_INFO "Its ours.\n");
if(i2o_find_lun(c, unit, &target, &lun)==-1)
{
printk(KERN_ERR "i2o_scsi: Unable to get lun for tid %d.\n", unit->lct_data.tid);
continue;
}
- dprintk(("Found disk %d %d.\n", target, lun));
+ dprintk(KERN_INFO "Found disk %d %d.\n", target, lun);
h->task[target][lun]=unit->lct_data.tid;
h->tagclock[target][lun]=jiffies;
@@ -439,8 +446,8 @@
shpnt->sg_tablesize = limit;
- dprintk(("i2o_scsi: set scatter-gather to %d.\n",
- shpnt->sg_tablesize));
+ dprintk(KERN_INFO "i2o_scsi: set scatter-gather to %d.\n",
+ shpnt->sg_tablesize);
}
}
}
@@ -558,6 +565,9 @@
del_timer(&retry_timer);
i2o_remove_handler(&i2o_scsi_handler);
}
+
+ scsi_unregister(host);
+
return 0;
}
@@ -624,7 +634,7 @@
tid = hostdata->task[SCpnt->device->id][SCpnt->device->lun];
- dprintk(("qcmd: Tid = %d\n", tid));
+ dprintk(KERN_INFO "qcmd: Tid = %d\n", tid);
current_command = SCpnt; /* set current command */
current_command->scsi_done = done; /* set ptr to done function */
@@ -641,7 +651,7 @@
return 0;
}
- dprintk(("Real scsi messages.\n"));
+ dprintk(KERN_INFO "Real scsi messages.\n");
/*
* Obtain an I2O message. If there are none free then
@@ -821,8 +831,8 @@
}
else
{
- dprintk(("non sg for %p, %d\n", SCpnt->request_buffer,
- SCpnt->request_bufflen));
+ dprintk(KERN_INFO "non sg for %p, %d\n", SCpnt->request_buffer,
+ SCpnt->request_bufflen);
i2o_raw_writel(len = SCpnt->request_bufflen, lenptr);
if(len == 0)
{
@@ -861,7 +871,7 @@
}
mb();
- dprintk(("Issued %ld\n", current_command->serial_number));
+ dprintk(KERN_INFO "Issued %ld\n", current_command->serial_number);
return 0;
}
--- a/include/linux/i2o-dev.h 2004-01-17 23:36:50.000000000 +0100
+++ b/include/linux/i2o-dev.h 2004-01-17 23:37:29.591626358 +0100
@@ -182,7 +182,7 @@
{
u32 adapter_id;
u32 parent_tid:12;
- u32 tate:4;
+ u32 state:4;
u32 bus_num:8;
u32 bus_type:8;
union