Re: [Linux-ATM-General] Kernel 2.6.10 and 2.4.29 Oops fore200e (fwd)

From: Lukasz Trabinski
Date: Sat Mar 05 2005 - 07:37:59 EST


On Sun, 30 Jan 2005, chas williams - CONTRACTOR wrote:

Hello again

good to hear. what does atmdiag say about that interface? does it have
a large percentage of tx drops?

After one month work without oops, we have experienced oops again. It happen when one or more VC is down (for example on atm switch).
We have two atm interfaces (fore_200e,nicstar) on our router:

[root@cosmos root]# lspci |grep ATM
01:01.0 ATM network controller: FORE Systems Inc ForeRunner PCA-200EPC ATM
01:05.0 ATM network controller: Integrated Device Tech IDT77211 ATM Adapter (rev 03)

I have changed schedule() to udelay(50) in fore_200e and nicstar.
I have replaced also atm nicstar card to second one.
In log file, we can see many infromation like this one:

nicstar0: AAL5 CRC error - PDU size mismatch.



ksymoops 2.4.11 on i686 2.4.29. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.29/ (default)
-m /lib/modules/2.4.29/System.map (specified)

CPU: 0
EIP: 0010:[<c01b68f9>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00000002
eax: c031ea00 ebx: 00000005 ecx: 00000001 edx: 000003fd
esi: c031eac0 edi: c0305ee3 ebp: 00000005 esp: c02b3e18
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c02b3000)
Stack: 000f4016 c01bbe61 c031eac0 00000005 00000044 0000000d 00000016 c02a4c60
c0305ede 00011c3e 00011c54 c0118452 c02a4c60 c0305ede 00000016 00011c54
00011c54 00000016 f793d480 c011855f 00011c3e 00011c54 00000004 c029a1bc
Call Trace: [<c01bbe61>] [<c0118452>] [<c011855f>] [<c0118893>] [<c01187bf>]
[<f8a1f165>] [<f8a1cc15>] [<f8a1f14f>] [<f8a1c96c>] [<f8a1b7ad>] [<c0109029>]
[<c0109248>] [<c0105330>] [<c010b938>] [<c0105330>] [<c0105359>] [<c01053f2>]
[<c0105000>]
Code: 5b 0f b6 c0 c3 89 f6 0f b7 48 74 8b 40 70 d3 e3 0f b6 04 03


EIP; c01b68f9 <serial_in+19/30> <=====

eax; c031ea00 <serial_termios_locked+60/100>
esi; c031eac0 <async_sercons+0/c0>
edi; c0305ee3 <log_buf+1c43/8000>
esp; c02b3e18 <init_task_union+1e18/2000>

Trace; c01bbe61 <serial_console_write+81/220>
Trace; c0118452 <__call_console_drivers+62/70>
Trace; c011855f <call_console_drivers+7f/120>
Trace; c0118893 <release_console_sem+53/b0>
Trace; c01187bf <printk+14f/180>
Trace; f8a1f165 <[nicstar]__module_license+4f/130a>
Trace; f8a1cc15 <[nicstar]dequeue_rx+265/1040>
Trace; f8a1f14f <[nicstar]__module_license+39/130a>
Trace; f8a1c96c <[nicstar]process_rsq+2c/70>
Trace; f8a1b7ad <[nicstar]ns_irq_handler+3ad/470>
Trace; c0109029 <handle_IRQ_event+79/b0>
Trace; c0109248 <do_IRQ+98/f0>
Trace; c0105330 <default_idle+0/50>
Trace; c010b938 <call_do_IRQ+5/d>
Trace; c0105330 <default_idle+0/50>
Trace; c0105359 <default_idle+29/50>
Trace; c01053f2 <cpu_idle+52/70>
Trace; c0105000 <_stext+0/0>

Code; c01b68f9 <serial_in+19/30>
00000000 <_EIP>:
Code; c01b68f9 <serial_in+19/30> <=====
0: 5b pop %ebx <=====
Code; c01b68fa <serial_in+1a/30>
1: 0f b6 c0 movzbl %al,%eax
Code; c01b68fd <serial_in+1d/30>
4: c3 ret Code; c01b68fe <serial_in+1e/30>
5: 89 f6 mov %esi,%esi
Code; c01b6900 <serial_in+20/30>
7: 0f b7 48 74 movzwl 0x74(%eax),%ecx
Code; c01b6904 <serial_in+24/30>
b: 8b 40 70 mov 0x70(%eax),%eax
Code; c01b6907 <serial_in+27/30>
e: d3 e3 shl %cl,%ebx
Code; c01b6909 <serial_in+29/30>
10: 0f b6 04 03 movzbl (%ebx,%eax,1),%eax

Where is the problem, patchord is bad, or problem exists on atm switch?

--
*[ Łukasz Trąbiński ]*
SysAdmin @wsisiz.edu.pl
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/