Re: 2.6.12 breaks 8139cp [PATCH 2 of 2]
From: Kylene Jo Hall
Date: Tue Jun 28 2005 - 15:42:40 EST
On Tue, 2005-06-28 at 10:23 -0700, Chris Wright wrote:
> * Kylene Jo Hall (kjhall@xxxxxxxxxx) wrote:
> >
> > > You wouldn't happen to have just your patches available?
> >
> > Here is the tpm portion of -mm patch
>
> Can you narrow this down to a fix that's reasonable for -stable?
>
I'll be sending two patches to fix this problem. The first one just
changes a bunch of #define's to named emums. The second is the real
fix. This was the easiest way for me, let me know if this is not ok.
Signed-off-by: Kylene Hall <kjhall@xxxxxxxxxx>
---
drivers/char/tpm/tpm.c | 90 -------------------------------------------
drivers/char/tpm/tpm.h | 2
drivers/char/tpm/tpm_atmel.c | 16 ++++---
drivers/char/tpm/tpm_nsc.c | 22 ++++++----
4 files changed, 22 insertions(+), 108 deletions(-)
diff -puN drivers/char/tpm/tpm_atmel.c~tpm-replace-odd-LPC-init-function drivers/char/tpm/tpm_atmel.c
--- 25/drivers/char/tpm/tpm_atmel.c~tpm-replace-odd-LPC-init-function 2005-06-23 21:26:00.000000000 -0700
+++ 25-akpm/drivers/char/tpm/tpm_atmel.c 2005-06-23 21:26:00.000000000 -0700
@@ -22,8 +22,9 @@
#include "tpm.h"
/* Atmel definitions */
-enum tpm_atmel_addr{
- TPM_ATML_BASE = 0x400
+enum tpm_atmel_addr {
+ TPM_ATMEL_BASE_ADDR_LO = 0x08,
+ TPM_ATMEL_BASE_ADDR_HI = 0x09
};
/* write status bits */
@@ -148,5 +149,4 @@ static struct tpm_vendor_specific tpm_at
.req_complete_mask = ATML_STATUS_BUSY | ATML_STATUS_DATA_AVAIL,
.req_complete_val = ATML_STATUS_DATA_AVAIL,
- .base = TPM_ATML_BASE,
.miscdev = { .fops = &atmel_ops, },
};
@@ -158,14 +158,16 @@ static int __devinit tpm_atml_init(struc
{
u8 version[4];
int rc = 0;
+ int lo, hi;
if (pci_enable_device(pci_dev))
return -EIO;
- if (tpm_lpc_bus_init(pci_dev, TPM_ATML_BASE)) {
- rc = -ENODEV;
- goto out_err;
- }
+ lo = tpm_read_index( TPM_ATMEL_BASE_ADDR_LO );
+ hi = tpm_read_index( TPM_ATMEL_BASE_ADDR_HI );
+
+ tpm_atmel.base = (hi<<8)|lo;
+ dev_dbg( &pci_dev->dev, "Operating with base: 0x%x\n", tpm_atmel.base);
/* verify that it is an Atmel part */
if (tpm_read_index(4) != 'A' || tpm_read_index(5) != 'T'
diff -puN drivers/char/tpm/tpm.c~tpm-replace-odd-LPC-init-function drivers/char/tpm/tpm.c
--- 25/drivers/char/tpm/tpm.c~tpm-replace-odd-LPC-init-function 2005-06-23 21:26:00.000000000 -0700
+++ 25-akpm/drivers/char/tpm/tpm.c 2005-06-23 21:52:40.000000000 -0700
@@ -35,25 +35,6 @@ enum tpm_const {
TPM_NUM_MASK_ENTRIES = TPM_NUM_DEVICES / (8 * sizeof(int))
};
- /* PCI configuration addresses */
-enum tpm_pci_config_addr {
- PCI_GEN_PMCON_1 = 0xA0,
- PCI_GEN1_DEC = 0xE4,
- PCI_LPC_EN = 0xE6,
- PCI_GEN2_DEC = 0xEC
-};
-
-enum tpm_config {
- TPM_LOCK_REG = 0x0D,
- TPM_INTERUPT_REG = 0x0A,
- TPM_BASE_ADDR_LO = 0x08,
- TPM_BASE_ADDR_HI = 0x09,
- TPM_UNLOCK_VALUE = 0x55,
- TPM_LOCK_VALUE = 0xAA,
- TPM_DISABLE_INTERUPT_VALUE = 0x00
-};
-
-
static LIST_HEAD(tpm_chip_list);
static DEFINE_SPINLOCK(driver_lock);
static int dev_mask[TPM_NUM_MASK_ENTRIES];
@@ -77,73 +77,6 @@ void tpm_time_expired(unsigned long ptr)
EXPORT_SYMBOL_GPL(tpm_time_expired);
/*
- * Initialize the LPC bus and enable the TPM ports
- */
-int tpm_lpc_bus_init(struct pci_dev *pci_dev, u16 base)
-{
- u32 lpcenable, tmp;
- int is_lpcm = 0;
-
- switch (pci_dev->vendor) {
- case PCI_VENDOR_ID_INTEL:
- switch (pci_dev->device) {
- case PCI_DEVICE_ID_INTEL_82801CA_12:
- case PCI_DEVICE_ID_INTEL_82801DB_12:
- is_lpcm = 1;
- break;
- }
- /* init ICH (enable LPC) */
- pci_read_config_dword(pci_dev, PCI_GEN1_DEC, &lpcenable);
- lpcenable |= 0x20000000;
- pci_write_config_dword(pci_dev, PCI_GEN1_DEC, lpcenable);
-
- if (is_lpcm) {
- pci_read_config_dword(pci_dev, PCI_GEN1_DEC,
- &lpcenable);
- if ((lpcenable & 0x20000000) == 0) {
- dev_err(&pci_dev->dev,
- "cannot enable LPC\n");
- return -ENODEV;
- }
- }
-
- /* initialize TPM registers */
- pci_read_config_dword(pci_dev, PCI_GEN2_DEC, &tmp);
-
- if (!is_lpcm)
- tmp = (tmp & 0xFFFF0000) | (base & 0xFFF0);
- else
- tmp =
- (tmp & 0xFFFF0000) | (base & 0xFFF0) |
- 0x00000001;
-
- pci_write_config_dword(pci_dev, PCI_GEN2_DEC, tmp);
-
- if (is_lpcm) {
- pci_read_config_dword(pci_dev, PCI_GEN_PMCON_1,
- &tmp);
- tmp |= 0x00000004; /* enable CLKRUN */
- pci_write_config_dword(pci_dev, PCI_GEN_PMCON_1,
- tmp);
- }
- break;
- case PCI_VENDOR_ID_AMD:
- /* nothing yet */
- break;
- }
-
- tpm_write_index(TPM_LOCK_REG, TPM_UNLOCK_VALUE);
- tpm_write_index(TPM_INTERUPT_REG, TPM_DISABLE_INTERUPT_VALUE);
- tpm_write_index(TPM_BASE_ADDR_LO, base);
- tpm_write_index(TPM_BASE_ADDR_HI, (base & 0xFF00) >> 8);
- tpm_write_index(TPM_LOCK_REG, TPM_LOCK_VALUE);
-
- return 0;
-}
-
-EXPORT_SYMBOL_GPL(tpm_lpc_bus_init);
-
-/*
* Internal kernel interface to transmit TPM commands
*/
static ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf,
@@ -586,10 +500,6 @@ int tpm_pm_resume(struct pci_dev *pci_de
if (chip == NULL)
return -ENODEV;
- spin_lock(&driver_lock);
- tpm_lpc_bus_init(pci_dev, chip->vendor->base);
- spin_unlock(&driver_lock);
-
return 0;
}
diff -puN drivers/char/tpm/tpm.h~tpm-replace-odd-LPC-init-function drivers/char/tpm/tpm.h
--- 25/drivers/char/tpm/tpm.h~tpm-replace-odd-LPC-init-function 2005-06-23 21:26:00.000000000 -0700
+++ 25-akpm/drivers/char/tpm/tpm.h 2005-06-23 21:26:00.000000000 -0700
@@ -91,9 +91,7 @@ static inline void tpm_write_index(int i
outb(value & 0xFF, TPM_DATA);
}
extern void tpm_time_expired(unsigned long);
-extern int tpm_lpc_bus_init(struct pci_dev *, u16);
-
extern int tpm_register_hardware(struct pci_dev *,
struct tpm_vendor_specific *);
extern int tpm_open(struct inode *, struct file *);
diff -puN drivers/char/tpm/tpm_nsc.c~tpm-replace-odd-LPC-init-function drivers/char/tpm/tpm_nsc.c
--- 25/drivers/char/tpm/tpm_nsc.c~tpm-replace-odd-LPC-init-function 2005-06-23 21:26:00.000000000 -0700
+++ 25-akpm/drivers/char/tpm/tpm_nsc.c 2005-06-23 21:26:00.000000000 -0700
@@ -22,9 +22,13 @@
#include "tpm.h"
/* National definitions */
-enum tpm_nsc_addr {
+enum tpm_nsc_addr{
TPM_NSC_BASE = 0x360,
- TPM_NSC_IRQ = 0x07
+ TPM_NSC_IRQ = 0x07,
+ TPM_NSC_BASE0_HI = 0x60,
+ TPM_NSC_BASE0_LO = 0x61,
+ TPM_NSC_BASE1_HI = 0x62,
+ TPM_NSC_BASE1_LO = 0x63
};
enum tpm_nsc_index {
@@ -44,7 +48,7 @@ enum tpm_nsc_status_loc {
};
/* status bits */
-enum tpm_nsc_status{
+enum tpm_nsc_status {
NSC_STATUS_OBF = 0x01, /* output buffer full */
NSC_STATUS_IBF = 0x02, /* input buffer full */
NSC_STATUS_F0 = 0x04, /* F0 */
@@ -246,5 +250,4 @@ static struct tpm_vendor_specific tpm_ns
.req_complete_mask = NSC_STATUS_OBF,
.req_complete_val = NSC_STATUS_OBF,
- .base = TPM_NSC_BASE,
.miscdev = { .fops = &nsc_ops, },
};
@@ -255,15 +258,16 @@ static int __devinit tpm_nsc_init(struct
const struct pci_device_id *pci_id)
{
int rc = 0;
+ int lo, hi;
+
+ hi = tpm_read_index(TPM_NSC_BASE0_HI);
+ lo = tpm_read_index(TPM_NSC_BASE0_LO);
+
+ tpm_nsc.base = (hi<<8) | lo;
if (pci_enable_device(pci_dev))
return -EIO;
- if (tpm_lpc_bus_init(pci_dev, TPM_NSC_BASE)) {
- rc = -ENODEV;
- goto out_err;
- }
-
/* verify that it is a National part (SID) */
if (tpm_read_index(NSC_SID_INDEX) != 0xEF) {
rc = -ENODEV;
_
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/