[git patches] libata update
From: Jeff Garzik
Date: Wed Jul 05 2006 - 23:06:18 EST
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/scsi/ahci.c | 17 +
drivers/scsi/libata-core.c | 289 ++++++++++++++++++++------------
drivers/scsi/libata-eh.c | 405 +++++++++++++++++++++++++++++++++++++++------
drivers/scsi/libata-scsi.c | 124 +++++++++++++
drivers/scsi/sata_sil.c | 105 +++++++----
drivers/scsi/sata_sil24.c | 134 +++++++++-----
drivers/scsi/sata_vsc.c | 2
include/linux/libata.h | 85 +++++++--
include/linux/pci_ids.h | 7
9 files changed, 897 insertions(+), 271 deletions(-)
Borislav Petkov:
libata-core.c: restore configuration boot messages in ata_dev_configure(), v2
Brian King:
libata: Conditionally set host->max_cmd_len
Jeff Garzik:
[PCI] Add JMicron PCI ID constants
Martin Hicks:
sata_vsc: data_xfer should use mmio
root:
ahci: Ensure that we don't grab both functions
Tejun Heo:
libata: add ap->pflags and move core dynamic flags to it
libata: fix ehc->i.action setting in ata_eh_autopsy()
libata: replace ap_lock w/ ap->lock in ata_scsi_error()
libata: implement ATA_EHI_RESUME_LINK
libata: clean up debounce parameters and improve parameter selection
libata: implement ATA_EHI_NO_AUTOPSY and QUIET
libata: separate out __ata_ehi_hotplugged()
libata: implement PM EH actions
libata: reimplement per-dev PM
libata: reimplement controller-wide PM
sata_sil: separate out sil_init_controller()
sata_sil: add suspend/sleep support
sata_sil24: separate out sil24_init_controller()
sata_sil24: add suspend/sleep support
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index 15f6cd4..77e7202 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -1052,7 +1052,7 @@ static void ahci_thaw(struct ata_port *a
static void ahci_error_handler(struct ata_port *ap)
{
- if (!(ap->flags & ATA_FLAG_FROZEN)) {
+ if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
/* restart engine */
ahci_stop_engine(ap);
ahci_start_engine(ap);
@@ -1323,6 +1323,17 @@ static int ahci_init_one (struct pci_dev
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+ /* JMicron-specific fixup: make sure we're in AHCI mode */
+ /* This is protected from races with ata_jmicron by the pci probe
+ locking */
+ if (pdev->vendor == PCI_VENDOR_ID_JMICRON) {
+ /* AHCI enable, AHCI on function 0 */
+ pci_write_config_byte(pdev, 0x41, 0xa1);
+ /* Function 1 is the PATA controller */
+ if (PCI_FUNC(pdev->devfn))
+ return -ENODEV;
+ }
+
rc = pci_enable_device(pdev);
if (rc)
return rc;
@@ -1378,10 +1389,6 @@ static int ahci_init_one (struct pci_dev
if (have_msi)
hpriv->flags |= AHCI_FLAG_MSI;
- /* JMicron-specific fixup: make sure we're in AHCI mode */
- if (pdev->vendor == 0x197b)
- pci_write_config_byte(pdev, 0x41, 0xa1);
-
/* initialize adapter */
rc = ahci_host_init(probe_ent);
if (rc)
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 1c960ac..386e5f2 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -61,9 +61,9 @@ #include <asm/byteorder.h>
#include "libata.h"
/* debounce timing parameters in msecs { interval, duration, timeout } */
-const unsigned long sata_deb_timing_boot[] = { 5, 100, 2000 };
-const unsigned long sata_deb_timing_eh[] = { 25, 500, 2000 };
-const unsigned long sata_deb_timing_before_fsrst[] = { 100, 2000, 5000 };
+const unsigned long sata_deb_timing_normal[] = { 5, 100, 2000 };
+const unsigned long sata_deb_timing_hotplug[] = { 25, 500, 2000 };
+const unsigned long sata_deb_timing_long[] = { 100, 2000, 5000 };
static unsigned int ata_dev_init_params(struct ata_device *dev,
u16 heads, u16 sectors);
@@ -907,7 +907,7 @@ void ata_port_queue_task(struct ata_port
{
int rc;
- if (ap->flags & ATA_FLAG_FLUSH_PORT_TASK)
+ if (ap->pflags & ATA_PFLAG_FLUSH_PORT_TASK)
return;
PREPARE_WORK(&ap->port_task, fn, data);
@@ -938,7 +938,7 @@ void ata_port_flush_task(struct ata_port
DPRINTK("ENTER\n");
spin_lock_irqsave(ap->lock, flags);
- ap->flags |= ATA_FLAG_FLUSH_PORT_TASK;
+ ap->pflags |= ATA_PFLAG_FLUSH_PORT_TASK;
spin_unlock_irqrestore(ap->lock, flags);
DPRINTK("flush #1\n");
@@ -957,7 +957,7 @@ void ata_port_flush_task(struct ata_port
}
spin_lock_irqsave(ap->lock, flags);
- ap->flags &= ~ATA_FLAG_FLUSH_PORT_TASK;
+ ap->pflags &= ~ATA_PFLAG_FLUSH_PORT_TASK;
spin_unlock_irqrestore(ap->lock, flags);
if (ata_msg_ctl(ap))
@@ -1009,7 +1009,7 @@ unsigned ata_exec_internal(struct ata_de
spin_lock_irqsave(ap->lock, flags);
/* no internal command while frozen */
- if (ap->flags & ATA_FLAG_FROZEN) {
+ if (ap->pflags & ATA_PFLAG_FROZEN) {
spin_unlock_irqrestore(ap->lock, flags);
return AC_ERR_SYSTEM;
}
@@ -1325,6 +1325,19 @@ static void ata_dev_config_ncq(struct at
snprintf(desc, desc_sz, "NCQ (depth %d/%d)", hdepth, ddepth);
}
+static void ata_set_port_max_cmd_len(struct ata_port *ap)
+{
+ int i;
+
+ if (ap->host) {
+ ap->host->max_cmd_len = 0;
+ for (i = 0; i < ATA_MAX_DEVICES; i++)
+ ap->host->max_cmd_len = max_t(unsigned int,
+ ap->host->max_cmd_len,
+ ap->device[i].cdb_len);
+ }
+}
+
/**
* ata_dev_configure - Configure the specified ATA/ATAPI device
* @dev: Target device to configure
@@ -1344,7 +1357,7 @@ int ata_dev_configure(struct ata_device
struct ata_port *ap = dev->ap;
const u16 *id = dev->id;
unsigned int xfer_mask;
- int i, rc;
+ int rc;
if (!ata_dev_enabled(dev) && ata_msg_info(ap)) {
ata_dev_printk(dev, KERN_INFO,
@@ -1404,7 +1417,7 @@ int ata_dev_configure(struct ata_device
ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));
/* print device info to dmesg */
- if (ata_msg_info(ap))
+ if (ata_msg_drv(ap) && print_info)
ata_dev_printk(dev, KERN_INFO, "ATA-%d, "
"max %s, %Lu sectors: %s %s\n",
ata_id_major_version(id),
@@ -1427,7 +1440,7 @@ int ata_dev_configure(struct ata_device
}
/* print device info to dmesg */
- if (ata_msg_info(ap))
+ if (ata_msg_drv(ap) && print_info)
ata_dev_printk(dev, KERN_INFO, "ATA-%d, "
"max %s, %Lu sectors: CHS %u/%u/%u\n",
ata_id_major_version(id),
@@ -1439,7 +1452,7 @@ int ata_dev_configure(struct ata_device
if (dev->id[59] & 0x100) {
dev->multi_count = dev->id[59] & 0xff;
- if (ata_msg_info(ap))
+ if (ata_msg_drv(ap) && print_info)
ata_dev_printk(dev, KERN_INFO,
"ata%u: dev %u multi count %u\n",
ap->id, dev->devno, dev->multi_count);
@@ -1468,21 +1481,17 @@ int ata_dev_configure(struct ata_device
}
/* print device info to dmesg */
- if (ata_msg_info(ap))
+ if (ata_msg_drv(ap) && print_info)
ata_dev_printk(dev, KERN_INFO, "ATAPI, max %s%s\n",
ata_mode_string(xfer_mask),
cdb_intr_string);
}
- ap->host->max_cmd_len = 0;
- for (i = 0; i < ATA_MAX_DEVICES; i++)
- ap->host->max_cmd_len = max_t(unsigned int,
- ap->host->max_cmd_len,
- ap->device[i].cdb_len);
+ ata_set_port_max_cmd_len(ap);
/* limit bridge transfers to udma5, 200 sectors */
if (ata_dev_knobble(dev)) {
- if (ata_msg_info(ap))
+ if (ata_msg_drv(ap) && print_info)
ata_dev_printk(dev, KERN_INFO,
"applying bridge limits\n");
dev->udma_mask &= ATA_UDMA5;
@@ -2137,7 +2146,7 @@ int ata_set_mode(struct ata_port *ap, st
* return error code and failing device on failure.
*/
for (i = 0; i < ATA_MAX_DEVICES; i++) {
- if (ata_dev_enabled(&ap->device[i])) {
+ if (ata_dev_ready(&ap->device[i])) {
ap->ops->set_mode(ap);
break;
}
@@ -2203,7 +2212,8 @@ int ata_set_mode(struct ata_port *ap, st
for (i = 0; i < ATA_MAX_DEVICES; i++) {
dev = &ap->device[i];
- if (!ata_dev_enabled(dev))
+ /* don't udpate suspended devices' xfer mode */
+ if (!ata_dev_ready(dev))
continue;
rc = ata_dev_set_mode(dev);
@@ -2579,7 +2589,7 @@ static void ata_wait_spinup(struct ata_p
/* first, debounce phy if SATA */
if (ap->cbl == ATA_CBL_SATA) {
- rc = sata_phy_debounce(ap, sata_deb_timing_eh);
+ rc = sata_phy_debounce(ap, sata_deb_timing_hotplug);
/* if debounced successfully and offline, no need to wait */
if ((rc == 0 || rc == -EOPNOTSUPP) && ata_port_offline(ap))
@@ -2615,16 +2625,17 @@ static void ata_wait_spinup(struct ata_p
int ata_std_prereset(struct ata_port *ap)
{
struct ata_eh_context *ehc = &ap->eh_context;
- const unsigned long *timing;
+ const unsigned long *timing = sata_ehc_deb_timing(ehc);
int rc;
- /* hotplug? */
- if (ehc->i.flags & ATA_EHI_HOTPLUGGED) {
- if (ap->flags & ATA_FLAG_HRST_TO_RESUME)
- ehc->i.action |= ATA_EH_HARDRESET;
- if (ap->flags & ATA_FLAG_SKIP_D2H_BSY)
- ata_wait_spinup(ap);
- }
+ /* handle link resume & hotplug spinup */
+ if ((ehc->i.flags & ATA_EHI_RESUME_LINK) &&
+ (ap->flags & ATA_FLAG_HRST_TO_RESUME))
+ ehc->i.action |= ATA_EH_HARDRESET;
+
+ if ((ehc->i.flags & ATA_EHI_HOTPLUGGED) &&
+ (ap->flags & ATA_FLAG_SKIP_D2H_BSY))
+ ata_wait_spinup(ap);
/* if we're about to do hardreset, nothing more to do */
if (ehc->i.action & ATA_EH_HARDRESET)
@@ -2632,11 +2643,6 @@ int ata_std_prereset(struct ata_port *ap
/* if SATA, resume phy */
if (ap->cbl == ATA_CBL_SATA) {
- if (ap->flags & ATA_FLAG_LOADING)
- timing = sata_deb_timing_boot;
- else
- timing = sata_deb_timing_eh;
-
rc = sata_phy_resume(ap, timing);
if (rc && rc != -EOPNOTSUPP) {
/* phy resume failed */
@@ -2724,6 +2730,8 @@ int ata_std_softreset(struct ata_port *a
*/
int sata_std_hardreset(struct ata_port *ap, unsigned int *class)
{
+ struct ata_eh_context *ehc = &ap->eh_context;
+ const unsigned long *timing = sata_ehc_deb_timing(ehc);
u32 scontrol;
int rc;
@@ -2761,7 +2769,7 @@ int sata_std_hardreset(struct ata_port *
msleep(1);
/* bring phy back */
- sata_phy_resume(ap, sata_deb_timing_eh);
+ sata_phy_resume(ap, timing);
/* TODO: phy layer with polling, timeouts, etc. */
if (ata_port_offline(ap)) {
@@ -4285,7 +4293,7 @@ static struct ata_queued_cmd *ata_qc_new
unsigned int i;
/* no command while frozen */
- if (unlikely(ap->flags & ATA_FLAG_FROZEN))
+ if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
return NULL;
/* the last tag is reserved for internal command. */
@@ -4407,7 +4415,7 @@ void ata_qc_complete(struct ata_queued_c
* taken care of.
*/
if (ap->ops->error_handler) {
- WARN_ON(ap->flags & ATA_FLAG_FROZEN);
+ WARN_ON(ap->pflags & ATA_PFLAG_FROZEN);
if (unlikely(qc->err_mask))
qc->flags |= ATA_QCFLAG_FAILED;
@@ -5001,86 +5009,120 @@ int ata_flush_cache(struct ata_device *d
return 0;
}
-static int ata_standby_drive(struct ata_device *dev)
+static int ata_host_set_request_pm(struct ata_host_set *host_set,
+ pm_message_t mesg, unsigned int action,
+ unsigned int ehi_flags, int wait)
{
- unsigned int err_mask;
+ unsigned long flags;
+ int i, rc;
- err_mask = ata_do_simple_cmd(dev, ATA_CMD_STANDBYNOW1);
- if (err_mask) {
- ata_dev_printk(dev, KERN_ERR, "failed to standby drive "
- "(err_mask=0x%x)\n", err_mask);
- return -EIO;
- }
+ for (i = 0; i < host_set->n_ports; i++) {
+ struct ata_port *ap = host_set->ports[i];
- return 0;
-}
+ /* Previous resume operation might still be in
+ * progress. Wait for PM_PENDING to clear.
+ */
+ if (ap->pflags & ATA_PFLAG_PM_PENDING) {
+ ata_port_wait_eh(ap);
+ WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
+ }
-static int ata_start_drive(struct ata_device *dev)
-{
- unsigned int err_mask;
+ /* request PM ops to EH */
+ spin_lock_irqsave(ap->lock, flags);
- err_mask = ata_do_simple_cmd(dev, ATA_CMD_IDLEIMMEDIATE);
- if (err_mask) {
- ata_dev_printk(dev, KERN_ERR, "failed to start drive "
- "(err_mask=0x%x)\n", err_mask);
- return -EIO;
+ ap->pm_mesg = mesg;
+ if (wait) {
+ rc = 0;
+ ap->pm_result = &rc;
+ }
+
+ ap->pflags |= ATA_PFLAG_PM_PENDING;
+ ap->eh_info.action |= action;
+ ap->eh_info.flags |= ehi_flags;
+
+ ata_port_schedule_eh(ap);
+
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ /* wait and check result */
+ if (wait) {
+ ata_port_wait_eh(ap);
+ WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
+ if (rc)
+ return rc;
+ }
}
return 0;
}
/**
- * ata_device_resume - wakeup a previously suspended devices
- * @dev: the device to resume
+ * ata_host_set_suspend - suspend host_set
+ * @host_set: host_set to suspend
+ * @mesg: PM message
*
- * Kick the drive back into action, by sending it an idle immediate
- * command and making sure its transfer mode matches between drive
- * and host.
+ * Suspend @host_set. Actual operation is performed by EH. This
+ * function requests EH to perform PM operations and waits for EH
+ * to finish.
*
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
*/
-int ata_device_resume(struct ata_device *dev)
+int ata_host_set_suspend(struct ata_host_set *host_set, pm_message_t mesg)
{
- struct ata_port *ap = dev->ap;
+ int i, j, rc;
- if (ap->flags & ATA_FLAG_SUSPENDED) {
- struct ata_device *failed_dev;
+ rc = ata_host_set_request_pm(host_set, mesg, 0, ATA_EHI_QUIET, 1);
+ if (rc)
+ goto fail;
- ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
- ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 200000);
+ /* EH is quiescent now. Fail if we have any ready device.
+ * This happens if hotplug occurs between completion of device
+ * suspension and here.
+ */
+ for (i = 0; i < host_set->n_ports; i++) {
+ struct ata_port *ap = host_set->ports[i];
- ap->flags &= ~ATA_FLAG_SUSPENDED;
- while (ata_set_mode(ap, &failed_dev))
- ata_dev_disable(failed_dev);
+ for (j = 0; j < ATA_MAX_DEVICES; j++) {
+ struct ata_device *dev = &ap->device[j];
+
+ if (ata_dev_ready(dev)) {
+ ata_port_printk(ap, KERN_WARNING,
+ "suspend failed, device %d "
+ "still active\n", dev->devno);
+ rc = -EBUSY;
+ goto fail;
+ }
+ }
}
- if (!ata_dev_enabled(dev))
- return 0;
- if (dev->class == ATA_DEV_ATA)
- ata_start_drive(dev);
+ host_set->dev->power.power_state = mesg;
return 0;
+
+ fail:
+ ata_host_set_resume(host_set);
+ return rc;
}
/**
- * ata_device_suspend - prepare a device for suspend
- * @dev: the device to suspend
- * @state: target power management state
+ * ata_host_set_resume - resume host_set
+ * @host_set: host_set to resume
+ *
+ * Resume @host_set. Actual operation is performed by EH. This
+ * function requests EH to perform PM operations and returns.
+ * Note that all resume operations are performed parallely.
*
- * Flush the cache on the drive, if appropriate, then issue a
- * standbynow command.
+ * LOCKING:
+ * Kernel thread context (may sleep).
*/
-int ata_device_suspend(struct ata_device *dev, pm_message_t state)
+void ata_host_set_resume(struct ata_host_set *host_set)
{
- struct ata_port *ap = dev->ap;
-
- if (!ata_dev_enabled(dev))
- return 0;
- if (dev->class == ATA_DEV_ATA)
- ata_flush_cache(dev);
-
- if (state.event != PM_EVENT_FREEZE)
- ata_standby_drive(dev);
- ap->flags |= ATA_FLAG_SUSPENDED;
- return 0;
+ ata_host_set_request_pm(host_set, PMSG_ON, ATA_EH_SOFTRESET,
+ ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0);
+ host_set->dev->power.power_state = PMSG_ON;
}
/**
@@ -5440,6 +5482,7 @@ int ata_device_add(const struct ata_prob
}
if (ap->ops->error_handler) {
+ struct ata_eh_info *ehi = &ap->eh_info;
unsigned long flags;
ata_port_probe(ap);
@@ -5447,10 +5490,11 @@ int ata_device_add(const struct ata_prob
/* kick EH for boot probing */
spin_lock_irqsave(ap->lock, flags);
- ap->eh_info.probe_mask = (1 << ATA_MAX_DEVICES) - 1;
- ap->eh_info.action |= ATA_EH_SOFTRESET;
+ ehi->probe_mask = (1 << ATA_MAX_DEVICES) - 1;
+ ehi->action |= ATA_EH_SOFTRESET;
+ ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
- ap->flags |= ATA_FLAG_LOADING;
+ ap->pflags |= ATA_PFLAG_LOADING;
ata_port_schedule_eh(ap);
spin_unlock_irqrestore(ap->lock, flags);
@@ -5518,7 +5562,7 @@ void ata_port_detach(struct ata_port *ap
/* tell EH we're leaving & flush EH */
spin_lock_irqsave(ap->lock, flags);
- ap->flags |= ATA_FLAG_UNLOADING;
+ ap->pflags |= ATA_PFLAG_UNLOADING;
spin_unlock_irqrestore(ap->lock, flags);
ata_port_wait_eh(ap);
@@ -5723,20 +5767,55 @@ int pci_test_config_bits(struct pci_dev
return (tmp == bits->val) ? 1 : 0;
}
-int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state)
+void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t state)
{
pci_save_state(pdev);
- pci_disable_device(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
- return 0;
+
+ if (state.event == PM_EVENT_SUSPEND) {
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
}
-int ata_pci_device_resume(struct pci_dev *pdev)
+void ata_pci_device_do_resume(struct pci_dev *pdev)
{
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
pci_enable_device(pdev);
pci_set_master(pdev);
+}
+
+int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev);
+ int rc = 0;
+
+ rc = ata_host_set_suspend(host_set, state);
+ if (rc)
+ return rc;
+
+ if (host_set->next) {
+ rc = ata_host_set_suspend(host_set->next, state);
+ if (rc) {
+ ata_host_set_resume(host_set);
+ return rc;
+ }
+ }
+
+ ata_pci_device_do_suspend(pdev, state);
+
+ return 0;
+}
+
+int ata_pci_device_resume(struct pci_dev *pdev)
+{
+ struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev);
+
+ ata_pci_device_do_resume(pdev);
+ ata_host_set_resume(host_set);
+ if (host_set->next)
+ ata_host_set_resume(host_set->next);
+
return 0;
}
#endif /* CONFIG_PCI */
@@ -5842,9 +5921,9 @@ u32 ata_wait_register(void __iomem *reg,
* Do not depend on ABI/API stability.
*/
-EXPORT_SYMBOL_GPL(sata_deb_timing_boot);
-EXPORT_SYMBOL_GPL(sata_deb_timing_eh);
-EXPORT_SYMBOL_GPL(sata_deb_timing_before_fsrst);
+EXPORT_SYMBOL_GPL(sata_deb_timing_normal);
+EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug);
+EXPORT_SYMBOL_GPL(sata_deb_timing_long);
EXPORT_SYMBOL_GPL(ata_std_bios_param);
EXPORT_SYMBOL_GPL(ata_std_ports);
EXPORT_SYMBOL_GPL(ata_device_add);
@@ -5916,6 +5995,8 @@ EXPORT_SYMBOL_GPL(sata_scr_write);
EXPORT_SYMBOL_GPL(sata_scr_write_flush);
EXPORT_SYMBOL_GPL(ata_port_online);
EXPORT_SYMBOL_GPL(ata_port_offline);
+EXPORT_SYMBOL_GPL(ata_host_set_suspend);
+EXPORT_SYMBOL_GPL(ata_host_set_resume);
EXPORT_SYMBOL_GPL(ata_id_string);
EXPORT_SYMBOL_GPL(ata_id_c_string);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
@@ -5930,14 +6011,14 @@ EXPORT_SYMBOL_GPL(ata_pci_host_stop);
EXPORT_SYMBOL_GPL(ata_pci_init_native_mode);
EXPORT_SYMBOL_GPL(ata_pci_init_one);
EXPORT_SYMBOL_GPL(ata_pci_remove_one);
+EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend);
+EXPORT_SYMBOL_GPL(ata_pci_device_do_resume);
EXPORT_SYMBOL_GPL(ata_pci_device_suspend);
EXPORT_SYMBOL_GPL(ata_pci_device_resume);
EXPORT_SYMBOL_GPL(ata_pci_default_filter);
EXPORT_SYMBOL_GPL(ata_pci_clear_simplex);
#endif /* CONFIG_PCI */
-EXPORT_SYMBOL_GPL(ata_device_suspend);
-EXPORT_SYMBOL_GPL(ata_device_resume);
EXPORT_SYMBOL_GPL(ata_scsi_device_suspend);
EXPORT_SYMBOL_GPL(ata_scsi_device_resume);
diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c
index bf5a72a..4b6aa30 100644
--- a/drivers/scsi/libata-eh.c
+++ b/drivers/scsi/libata-eh.c
@@ -47,6 +47,8 @@ #include "libata.h"
static void __ata_port_freeze(struct ata_port *ap);
static void ata_eh_finish(struct ata_port *ap);
+static void ata_eh_handle_port_suspend(struct ata_port *ap);
+static void ata_eh_handle_port_resume(struct ata_port *ap);
static void ata_ering_record(struct ata_ering *ering, int is_io,
unsigned int err_mask)
@@ -190,7 +192,6 @@ enum scsi_eh_timer_return ata_scsi_timed
void ata_scsi_error(struct Scsi_Host *host)
{
struct ata_port *ap = ata_shost_to_port(host);
- spinlock_t *ap_lock = ap->lock;
int i, repeat_cnt = ATA_EH_MAX_REPEAT;
unsigned long flags;
@@ -217,7 +218,7 @@ void ata_scsi_error(struct Scsi_Host *ho
struct scsi_cmnd *scmd, *tmp;
int nr_timedout = 0;
- spin_lock_irqsave(ap_lock, flags);
+ spin_lock_irqsave(ap->lock, flags);
list_for_each_entry_safe(scmd, tmp, &host->eh_cmd_q, eh_entry) {
struct ata_queued_cmd *qc;
@@ -256,43 +257,49 @@ void ata_scsi_error(struct Scsi_Host *ho
if (nr_timedout)
__ata_port_freeze(ap);
- spin_unlock_irqrestore(ap_lock, flags);
+ spin_unlock_irqrestore(ap->lock, flags);
} else
- spin_unlock_wait(ap_lock);
+ spin_unlock_wait(ap->lock);
repeat:
/* invoke error handler */
if (ap->ops->error_handler) {
+ /* process port resume request */
+ ata_eh_handle_port_resume(ap);
+
/* fetch & clear EH info */
- spin_lock_irqsave(ap_lock, flags);
+ spin_lock_irqsave(ap->lock, flags);
memset(&ap->eh_context, 0, sizeof(ap->eh_context));
ap->eh_context.i = ap->eh_info;
memset(&ap->eh_info, 0, sizeof(ap->eh_info));
- ap->flags |= ATA_FLAG_EH_IN_PROGRESS;
- ap->flags &= ~ATA_FLAG_EH_PENDING;
+ ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS;
+ ap->pflags &= ~ATA_PFLAG_EH_PENDING;
- spin_unlock_irqrestore(ap_lock, flags);
+ spin_unlock_irqrestore(ap->lock, flags);
- /* invoke EH. if unloading, just finish failed qcs */
- if (!(ap->flags & ATA_FLAG_UNLOADING))
+ /* invoke EH, skip if unloading or suspended */
+ if (!(ap->pflags & (ATA_PFLAG_UNLOADING | ATA_PFLAG_SUSPENDED)))
ap->ops->error_handler(ap);
else
ata_eh_finish(ap);
+ /* process port suspend request */
+ ata_eh_handle_port_suspend(ap);
+
/* Exception might have happend after ->error_handler
* recovered the port but before this point. Repeat
* EH in such case.
*/
- spin_lock_irqsave(ap_lock, flags);
+ spin_lock_irqsave(ap->lock, flags);
- if (ap->flags & ATA_FLAG_EH_PENDING) {
+ if (ap->pflags & ATA_PFLAG_EH_PENDING) {
if (--repeat_cnt) {
ata_port_printk(ap, KERN_INFO,
"EH pending after completion, "
"repeating EH (cnt=%d)\n", repeat_cnt);
- spin_unlock_irqrestore(ap_lock, flags);
+ spin_unlock_irqrestore(ap->lock, flags);
goto repeat;
}
ata_port_printk(ap, KERN_ERR, "EH pending after %d "
@@ -302,14 +309,14 @@ void ata_scsi_error(struct Scsi_Host *ho
/* this run is complete, make sure EH info is clear */
memset(&ap->eh_info, 0, sizeof(ap->eh_info));
- /* Clear host_eh_scheduled while holding ap_lock such
+ /* Clear host_eh_scheduled while holding ap->lock such
* that if exception occurs after this point but
* before EH completion, SCSI midlayer will
* re-initiate EH.
*/
host->host_eh_scheduled = 0;
- spin_unlock_irqrestore(ap_lock, flags);
+ spin_unlock_irqrestore(ap->lock, flags);
} else {
WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL);
ap->ops->eng_timeout(ap);
@@ -321,24 +328,23 @@ void ata_scsi_error(struct Scsi_Host *ho
scsi_eh_flush_done_q(&ap->eh_done_q);
/* clean up */
- spin_lock_irqsave(ap_lock, flags);
+ spin_lock_irqsave(ap->lock, flags);
- if (ap->flags & ATA_FLAG_LOADING) {
- ap->flags &= ~ATA_FLAG_LOADING;
- } else {
- if (ap->flags & ATA_FLAG_SCSI_HOTPLUG)
- queue_work(ata_aux_wq, &ap->hotplug_task);
- if (ap->flags & ATA_FLAG_RECOVERED)
- ata_port_printk(ap, KERN_INFO, "EH complete\n");
- }
+ if (ap->pflags & ATA_PFLAG_LOADING)
+ ap->pflags &= ~ATA_PFLAG_LOADING;
+ else if (ap->pflags & ATA_PFLAG_SCSI_HOTPLUG)
+ queue_work(ata_aux_wq, &ap->hotplug_task);
+
+ if (ap->pflags & ATA_PFLAG_RECOVERED)
+ ata_port_printk(ap, KERN_INFO, "EH complete\n");
- ap->flags &= ~(ATA_FLAG_SCSI_HOTPLUG | ATA_FLAG_RECOVERED);
+ ap->pflags &= ~(ATA_PFLAG_SCSI_HOTPLUG | ATA_PFLAG_RECOVERED);
/* tell wait_eh that we're done */
- ap->flags &= ~ATA_FLAG_EH_IN_PROGRESS;
+ ap->pflags &= ~ATA_PFLAG_EH_IN_PROGRESS;
wake_up_all(&ap->eh_wait_q);
- spin_unlock_irqrestore(ap_lock, flags);
+ spin_unlock_irqrestore(ap->lock, flags);
DPRINTK("EXIT\n");
}
@@ -360,7 +366,7 @@ void ata_port_wait_eh(struct ata_port *a
retry:
spin_lock_irqsave(ap->lock, flags);
- while (ap->flags & (ATA_FLAG_EH_PENDING | ATA_FLAG_EH_IN_PROGRESS)) {
+ while (ap->pflags & (ATA_PFLAG_EH_PENDING | ATA_PFLAG_EH_IN_PROGRESS)) {
prepare_to_wait(&ap->eh_wait_q, &wait, TASK_UNINTERRUPTIBLE);
spin_unlock_irqrestore(ap->lock, flags);
schedule();
@@ -489,7 +495,7 @@ void ata_qc_schedule_eh(struct ata_queue
WARN_ON(!ap->ops->error_handler);
qc->flags |= ATA_QCFLAG_FAILED;
- qc->ap->flags |= ATA_FLAG_EH_PENDING;
+ qc->ap->pflags |= ATA_PFLAG_EH_PENDING;
/* The following will fail if timeout has already expired.
* ata_scsi_error() takes care of such scmds on EH entry.
@@ -513,7 +519,7 @@ void ata_port_schedule_eh(struct ata_por
{
WARN_ON(!ap->ops->error_handler);
- ap->flags |= ATA_FLAG_EH_PENDING;
+ ap->pflags |= ATA_PFLAG_EH_PENDING;
scsi_schedule_eh(ap->host);
DPRINTK("port EH scheduled\n");
@@ -578,7 +584,7 @@ static void __ata_port_freeze(struct ata
if (ap->ops->freeze)
ap->ops->freeze(ap);
- ap->flags |= ATA_FLAG_FROZEN;
+ ap->pflags |= ATA_PFLAG_FROZEN;
DPRINTK("ata%u port frozen\n", ap->id);
}
@@ -646,7 +652,7 @@ void ata_eh_thaw_port(struct ata_port *a
spin_lock_irqsave(ap->lock, flags);
- ap->flags &= ~ATA_FLAG_FROZEN;
+ ap->pflags &= ~ATA_PFLAG_FROZEN;
if (ap->ops->thaw)
ap->ops->thaw(ap);
@@ -731,7 +737,7 @@ static void ata_eh_detach_dev(struct ata
if (ata_scsi_offline_dev(dev)) {
dev->flags |= ATA_DFLAG_DETACHED;
- ap->flags |= ATA_FLAG_SCSI_HOTPLUG;
+ ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
}
/* clear per-dev EH actions */
@@ -760,8 +766,12 @@ static void ata_eh_about_to_do(struct at
unsigned long flags;
spin_lock_irqsave(ap->lock, flags);
+
ata_eh_clear_action(dev, &ap->eh_info, action);
- ap->flags |= ATA_FLAG_RECOVERED;
+
+ if (!(ap->eh_context.i.flags & ATA_EHI_QUIET))
+ ap->pflags |= ATA_PFLAG_RECOVERED;
+
spin_unlock_irqrestore(ap->lock, flags);
}
@@ -1027,7 +1037,7 @@ static void ata_eh_analyze_ncq_error(str
int tag, rc;
/* if frozen, we can't do much */
- if (ap->flags & ATA_FLAG_FROZEN)
+ if (ap->pflags & ATA_PFLAG_FROZEN)
return;
/* is it NCQ device error? */
@@ -1275,6 +1285,9 @@ static void ata_eh_autopsy(struct ata_po
DPRINTK("ENTER\n");
+ if (ehc->i.flags & ATA_EHI_NO_AUTOPSY)
+ return;
+
/* obtain and analyze SError */
rc = sata_scr_read(ap, SCR_ERROR, &serror);
if (rc == 0) {
@@ -1327,7 +1340,7 @@ static void ata_eh_autopsy(struct ata_po
}
/* enforce default EH actions */
- if (ap->flags & ATA_FLAG_FROZEN ||
+ if (ap->pflags & ATA_PFLAG_FROZEN ||
all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT))
action |= ATA_EH_SOFTRESET;
else if (all_err_mask)
@@ -1346,7 +1359,7 @@ static void ata_eh_autopsy(struct ata_po
/* record autopsy result */
ehc->i.dev = failed_dev;
- ehc->i.action = action;
+ ehc->i.action |= action;
DPRINTK("EXIT\n");
}
@@ -1385,7 +1398,7 @@ static void ata_eh_report(struct ata_por
return;
frozen = "";
- if (ap->flags & ATA_FLAG_FROZEN)
+ if (ap->pflags & ATA_PFLAG_FROZEN)
frozen = " frozen";
if (ehc->i.dev) {
@@ -1465,7 +1478,7 @@ static int ata_eh_reset(struct ata_port
struct ata_eh_context *ehc = &ap->eh_context;
unsigned int *classes = ehc->classes;
int tries = ATA_EH_RESET_TRIES;
- int verbose = !(ap->flags & ATA_FLAG_LOADING);
+ int verbose = !(ehc->i.flags & ATA_EHI_QUIET);
unsigned int action;
ata_reset_fn_t reset;
int i, did_followup_srst, rc;
@@ -1605,7 +1618,7 @@ static int ata_eh_revalidate_and_attach(
dev = &ap->device[i];
action = ata_eh_dev_action(dev);
- if (action & ATA_EH_REVALIDATE && ata_dev_enabled(dev)) {
+ if (action & ATA_EH_REVALIDATE && ata_dev_ready(dev)) {
if (ata_port_offline(ap)) {
rc = -EIO;
break;
@@ -1636,7 +1649,7 @@ static int ata_eh_revalidate_and_attach(
}
spin_lock_irqsave(ap->lock, flags);
- ap->flags |= ATA_FLAG_SCSI_HOTPLUG;
+ ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
spin_unlock_irqrestore(ap->lock, flags);
}
}
@@ -1648,6 +1661,164 @@ static int ata_eh_revalidate_and_attach(
return rc;
}
+/**
+ * ata_eh_suspend - handle suspend EH action
+ * @ap: target host port
+ * @r_failed_dev: result parameter to indicate failing device
+ *
+ * Handle suspend EH action. Disk devices are spinned down and
+ * other types of devices are just marked suspended. Once
+ * suspended, no EH action to the device is allowed until it is
+ * resumed.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise
+ */
+static int ata_eh_suspend(struct ata_port *ap, struct ata_device **r_failed_dev)
+{
+ struct ata_device *dev;
+ int i, rc = 0;
+
+ DPRINTK("ENTER\n");
+
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ unsigned long flags;
+ unsigned int action, err_mask;
+
+ dev = &ap->device[i];
+ action = ata_eh_dev_action(dev);
+
+ if (!ata_dev_enabled(dev) || !(action & ATA_EH_SUSPEND))
+ continue;
+
+ WARN_ON(dev->flags & ATA_DFLAG_SUSPENDED);
+
+ ata_eh_about_to_do(ap, dev, ATA_EH_SUSPEND);
+
+ if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) {
+ /* flush cache */
+ rc = ata_flush_cache(dev);
+ if (rc)
+ break;
+
+ /* spin down */
+ err_mask = ata_do_simple_cmd(dev, ATA_CMD_STANDBYNOW1);
+ if (err_mask) {
+ ata_dev_printk(dev, KERN_ERR, "failed to "
+ "spin down (err_mask=0x%x)\n",
+ err_mask);
+ rc = -EIO;
+ break;
+ }
+ }
+
+ spin_lock_irqsave(ap->lock, flags);
+ dev->flags |= ATA_DFLAG_SUSPENDED;
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ ata_eh_done(ap, dev, ATA_EH_SUSPEND);
+ }
+
+ if (rc)
+ *r_failed_dev = dev;
+
+ DPRINTK("EXIT\n");
+ return 0;
+}
+
+/**
+ * ata_eh_prep_resume - prep for resume EH action
+ * @ap: target host port
+ *
+ * Clear SUSPENDED in preparation for scheduled resume actions.
+ * This allows other parts of EH to access the devices being
+ * resumed.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ */
+static void ata_eh_prep_resume(struct ata_port *ap)
+{
+ struct ata_device *dev;
+ unsigned long flags;
+ int i;
+
+ DPRINTK("ENTER\n");
+
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ unsigned int action;
+
+ dev = &ap->device[i];
+ action = ata_eh_dev_action(dev);
+
+ if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME))
+ continue;
+
+ spin_lock_irqsave(ap->lock, flags);
+ dev->flags &= ~ATA_DFLAG_SUSPENDED;
+ spin_unlock_irqrestore(ap->lock, flags);
+ }
+
+ DPRINTK("EXIT\n");
+}
+
+/**
+ * ata_eh_resume - handle resume EH action
+ * @ap: target host port
+ * @r_failed_dev: result parameter to indicate failing device
+ *
+ * Handle resume EH action. Target devices are already reset and
+ * revalidated. Spinning up is the only operation left.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise
+ */
+static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev)
+{
+ struct ata_device *dev;
+ int i, rc = 0;
+
+ DPRINTK("ENTER\n");
+
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ unsigned int action, err_mask;
+
+ dev = &ap->device[i];
+ action = ata_eh_dev_action(dev);
+
+ if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME))
+ continue;
+
+ ata_eh_about_to_do(ap, dev, ATA_EH_RESUME);
+
+ if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) {
+ err_mask = ata_do_simple_cmd(dev,
+ ATA_CMD_IDLEIMMEDIATE);
+ if (err_mask) {
+ ata_dev_printk(dev, KERN_ERR, "failed to "
+ "spin up (err_mask=0x%x)\n",
+ err_mask);
+ rc = -EIO;
+ break;
+ }
+ }
+
+ ata_eh_done(ap, dev, ATA_EH_RESUME);
+ }
+
+ if (rc)
+ *r_failed_dev = dev;
+
+ DPRINTK("EXIT\n");
+ return 0;
+}
+
static int ata_port_nr_enabled(struct ata_port *ap)
{
int i, cnt = 0;
@@ -1673,7 +1844,19 @@ static int ata_eh_skip_recovery(struct a
struct ata_eh_context *ehc = &ap->eh_context;
int i;
- if (ap->flags & ATA_FLAG_FROZEN || ata_port_nr_enabled(ap))
+ /* skip if all possible devices are suspended */
+ for (i = 0; i < ata_port_max_devices(ap); i++) {
+ struct ata_device *dev = &ap->device[i];
+
+ if (ata_dev_absent(dev) || ata_dev_ready(dev))
+ break;
+ }
+
+ if (i == ata_port_max_devices(ap))
+ return 1;
+
+ /* always thaw frozen port and recover failed devices */
+ if (ap->pflags & ATA_PFLAG_FROZEN || ata_port_nr_enabled(ap))
return 0;
/* skip if class codes for all vacant slots are ATA_DEV_NONE */
@@ -1744,9 +1927,12 @@ static int ata_eh_recover(struct ata_por
rc = 0;
/* if UNLOADING, finish immediately */
- if (ap->flags & ATA_FLAG_UNLOADING)
+ if (ap->pflags & ATA_PFLAG_UNLOADING)
goto out;
+ /* prep for resume */
+ ata_eh_prep_resume(ap);
+
/* skip EH if possible. */
if (ata_eh_skip_recovery(ap))
ehc->i.action = 0;
@@ -1774,6 +1960,11 @@ static int ata_eh_recover(struct ata_por
if (rc)
goto dev_fail;
+ /* resume devices */
+ rc = ata_eh_resume(ap, &dev);
+ if (rc)
+ goto dev_fail;
+
/* configure transfer mode if the port has been reset */
if (ehc->i.flags & ATA_EHI_DID_RESET) {
rc = ata_set_mode(ap, &dev);
@@ -1783,6 +1974,11 @@ static int ata_eh_recover(struct ata_por
}
}
+ /* suspend devices */
+ rc = ata_eh_suspend(ap, &dev);
+ if (rc)
+ goto dev_fail;
+
goto out;
dev_fail:
@@ -1908,11 +2104,124 @@ void ata_do_eh(struct ata_port *ap, ata_
ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
ata_postreset_fn_t postreset)
{
- if (!(ap->flags & ATA_FLAG_LOADING)) {
- ata_eh_autopsy(ap);
- ata_eh_report(ap);
- }
-
+ ata_eh_autopsy(ap);
+ ata_eh_report(ap);
ata_eh_recover(ap, prereset, softreset, hardreset, postreset);
ata_eh_finish(ap);
}
+
+/**
+ * ata_eh_handle_port_suspend - perform port suspend operation
+ * @ap: port to suspend
+ *
+ * Suspend @ap.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ */
+static void ata_eh_handle_port_suspend(struct ata_port *ap)
+{
+ unsigned long flags;
+ int rc = 0;
+
+ /* are we suspending? */
+ spin_lock_irqsave(ap->lock, flags);
+ if (!(ap->pflags & ATA_PFLAG_PM_PENDING) ||
+ ap->pm_mesg.event == PM_EVENT_ON) {
+ spin_unlock_irqrestore(ap->lock, flags);
+ return;
+ }
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ WARN_ON(ap->pflags & ATA_PFLAG_SUSPENDED);
+
+ /* suspend */
+ ata_eh_freeze_port(ap);
+
+ if (ap->ops->port_suspend)
+ rc = ap->ops->port_suspend(ap, ap->pm_mesg);
+
+ /* report result */
+ spin_lock_irqsave(ap->lock, flags);
+
+ ap->pflags &= ~ATA_PFLAG_PM_PENDING;
+ if (rc == 0)
+ ap->pflags |= ATA_PFLAG_SUSPENDED;
+ else
+ ata_port_schedule_eh(ap);
+
+ if (ap->pm_result) {
+ *ap->pm_result = rc;
+ ap->pm_result = NULL;
+ }
+
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ return;
+}
+
+/**
+ * ata_eh_handle_port_resume - perform port resume operation
+ * @ap: port to resume
+ *
+ * Resume @ap.
+ *
+ * This function also waits upto one second until all devices
+ * hanging off this port requests resume EH action. This is to
+ * prevent invoking EH and thus reset multiple times on resume.
+ *
+ * On DPM resume, where some of devices might not be resumed
+ * together, this may delay port resume upto one second, but such
+ * DPM resumes are rare and 1 sec delay isn't too bad.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ */
+static void ata_eh_handle_port_resume(struct ata_port *ap)
+{
+ unsigned long timeout;
+ unsigned long flags;
+ int i, rc = 0;
+
+ /* are we resuming? */
+ spin_lock_irqsave(ap->lock, flags);
+ if (!(ap->pflags & ATA_PFLAG_PM_PENDING) ||
+ ap->pm_mesg.event != PM_EVENT_ON) {
+ spin_unlock_irqrestore(ap->lock, flags);
+ return;
+ }
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ /* spurious? */
+ if (!(ap->pflags & ATA_PFLAG_SUSPENDED))
+ goto done;
+
+ if (ap->ops->port_resume)
+ rc = ap->ops->port_resume(ap);
+
+ /* give devices time to request EH */
+ timeout = jiffies + HZ; /* 1s max */
+ while (1) {
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ struct ata_device *dev = &ap->device[i];
+ unsigned int action = ata_eh_dev_action(dev);
+
+ if ((dev->flags & ATA_DFLAG_SUSPENDED) &&
+ !(action & ATA_EH_RESUME))
+ break;
+ }
+
+ if (i == ATA_MAX_DEVICES || time_after(jiffies, timeout))
+ break;
+ msleep(10);
+ }
+
+ done:
+ spin_lock_irqsave(ap->lock, flags);
+ ap->pflags &= ~(ATA_PFLAG_PM_PENDING | ATA_PFLAG_SUSPENDED);
+ if (ap->pm_result) {
+ *ap->pm_result = rc;
+ ap->pm_result = NULL;
+ }
+ spin_unlock_irqrestore(ap->lock, flags);
+}
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 2915bca..7ced41e 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -397,20 +397,129 @@ void ata_dump_status(unsigned id, struct
}
}
-int ata_scsi_device_resume(struct scsi_device *sdev)
+/**
+ * ata_scsi_device_suspend - suspend ATA device associated with sdev
+ * @sdev: the SCSI device to suspend
+ * @state: target power management state
+ *
+ * Request suspend EH action on the ATA device associated with
+ * @sdev and wait for the operation to complete.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state)
{
struct ata_port *ap = ata_shost_to_port(sdev->host);
- struct ata_device *dev = __ata_scsi_find_dev(ap, sdev);
+ struct ata_device *dev = ata_scsi_find_dev(ap, sdev);
+ unsigned long flags;
+ unsigned int action;
+ int rc = 0;
+
+ if (!dev)
+ goto out;
+
+ spin_lock_irqsave(ap->lock, flags);
+
+ /* wait for the previous resume to complete */
+ while (dev->flags & ATA_DFLAG_SUSPENDED) {
+ spin_unlock_irqrestore(ap->lock, flags);
+ ata_port_wait_eh(ap);
+ spin_lock_irqsave(ap->lock, flags);
+ }
+
+ /* if @sdev is already detached, nothing to do */
+ if (sdev->sdev_state == SDEV_OFFLINE ||
+ sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL)
+ goto out_unlock;
+
+ /* request suspend */
+ action = ATA_EH_SUSPEND;
+ if (state.event != PM_EVENT_SUSPEND)
+ action |= ATA_EH_PM_FREEZE;
+ ap->eh_info.dev_action[dev->devno] |= action;
+ ap->eh_info.flags |= ATA_EHI_QUIET;
+ ata_port_schedule_eh(ap);
+
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ /* wait for EH to do the job */
+ ata_port_wait_eh(ap);
+
+ spin_lock_irqsave(ap->lock, flags);
+
+ /* If @sdev is still attached but the associated ATA device
+ * isn't suspended, the operation failed.
+ */
+ if (sdev->sdev_state != SDEV_OFFLINE &&
+ sdev->sdev_state != SDEV_CANCEL && sdev->sdev_state != SDEV_DEL &&
+ !(dev->flags & ATA_DFLAG_SUSPENDED))
+ rc = -EIO;
- return ata_device_resume(dev);
+ out_unlock:
+ spin_unlock_irqrestore(ap->lock, flags);
+ out:
+ if (rc == 0)
+ sdev->sdev_gendev.power.power_state = state;
+ return rc;
}
-int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state)
+/**
+ * ata_scsi_device_resume - resume ATA device associated with sdev
+ * @sdev: the SCSI device to resume
+ *
+ * Request resume EH action on the ATA device associated with
+ * @sdev and return immediately. This enables parallel
+ * wakeup/spinup of devices.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ *
+ * RETURNS:
+ * 0.
+ */
+int ata_scsi_device_resume(struct scsi_device *sdev)
{
struct ata_port *ap = ata_shost_to_port(sdev->host);
- struct ata_device *dev = __ata_scsi_find_dev(ap, sdev);
+ struct ata_device *dev = ata_scsi_find_dev(ap, sdev);
+ struct ata_eh_info *ehi = &ap->eh_info;
+ unsigned long flags;
+ unsigned int action;
+
+ if (!dev)
+ goto out;
+
+ spin_lock_irqsave(ap->lock, flags);
+
+ /* if @sdev is already detached, nothing to do */
+ if (sdev->sdev_state == SDEV_OFFLINE ||
+ sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL)
+ goto out_unlock;
- return ata_device_suspend(dev, state);
+ /* request resume */
+ action = ATA_EH_RESUME;
+ if (sdev->sdev_gendev.power.power_state.event == PM_EVENT_SUSPEND)
+ __ata_ehi_hotplugged(ehi);
+ else
+ action |= ATA_EH_PM_FREEZE | ATA_EH_SOFTRESET;
+ ehi->dev_action[dev->devno] |= action;
+
+ /* We don't want autopsy and verbose EH messages. Disable
+ * those if we're the only device on this link.
+ */
+ if (ata_port_max_devices(ap) == 1)
+ ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
+
+ ata_port_schedule_eh(ap);
+
+ out_unlock:
+ spin_unlock_irqrestore(ap->lock, flags);
+ out:
+ sdev->sdev_gendev.power.power_state = PMSG_ON;
+ return 0;
}
/**
@@ -2930,7 +3039,7 @@ void ata_scsi_hotplug(void *data)
struct ata_port *ap = data;
int i;
- if (ap->flags & ATA_FLAG_UNLOADING) {
+ if (ap->pflags & ATA_PFLAG_UNLOADING) {
DPRINTK("ENTER/EXIT - unloading\n");
return;
}
@@ -3011,6 +3120,7 @@ static int ata_scsi_user_scan(struct Scs
if (dev) {
ap->eh_info.probe_mask |= 1 << dev->devno;
ap->eh_info.action |= ATA_EH_SOFTRESET;
+ ap->eh_info.flags |= ATA_EHI_RESUME_LINK;
} else
rc = -EINVAL;
}
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
index 7aabb45..d0a8507 100644
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -109,6 +109,7 @@ enum {
};
static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
+static int sil_pci_device_resume(struct pci_dev *pdev);
static void sil_dev_config(struct ata_port *ap, struct ata_device *dev);
static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
@@ -160,6 +161,8 @@ static struct pci_driver sil_pci_driver
.id_table = sil_pci_tbl,
.probe = sil_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = sil_pci_device_resume,
};
static struct scsi_host_template sil_sht = {
@@ -178,6 +181,8 @@ static struct scsi_host_template sil_sht
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+ .suspend = ata_scsi_device_suspend,
+ .resume = ata_scsi_device_resume,
};
static const struct ata_port_operations sil_ops = {
@@ -370,7 +375,7 @@ static void sil_host_intr(struct ata_por
* during hardreset makes controllers with broken SIEN
* repeat probing needlessly.
*/
- if (!(ap->flags & ATA_FLAG_FROZEN)) {
+ if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
ata_ehi_hotplugged(&ap->eh_info);
ap->eh_info.serror |= serror;
}
@@ -561,6 +566,52 @@ static void sil_dev_config(struct ata_po
}
}
+static void sil_init_controller(struct pci_dev *pdev,
+ int n_ports, unsigned long host_flags,
+ void __iomem *mmio_base)
+{
+ u8 cls;
+ u32 tmp;
+ int i;
+
+ /* Initialize FIFO PCI bus arbitration */
+ cls = sil_get_device_cache_line(pdev);
+ if (cls) {
+ cls >>= 3;
+ cls++; /* cls = (line_size/8)+1 */
+ for (i = 0; i < n_ports; i++)
+ writew(cls << 8 | cls,
+ mmio_base + sil_port[i].fifo_cfg);
+ } else
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "cache line size not set. Driver may not function\n");
+
+ /* Apply R_ERR on DMA activate FIS errata workaround */
+ if (host_flags & SIL_FLAG_RERR_ON_DMA_ACT) {
+ int cnt;
+
+ for (i = 0, cnt = 0; i < n_ports; i++) {
+ tmp = readl(mmio_base + sil_port[i].sfis_cfg);
+ if ((tmp & 0x3) != 0x01)
+ continue;
+ if (!cnt)
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Applying R_ERR on DMA activate "
+ "FIS errata fix\n");
+ writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg);
+ cnt++;
+ }
+ }
+
+ if (n_ports == 4) {
+ /* flip the magic "make 4 ports work" bit */
+ tmp = readl(mmio_base + sil_port[2].bmdma);
+ if ((tmp & SIL_INTR_STEERING) == 0)
+ writel(tmp | SIL_INTR_STEERING,
+ mmio_base + sil_port[2].bmdma);
+ }
+}
+
static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
@@ -570,8 +621,6 @@ static int sil_init_one (struct pci_dev
int rc;
unsigned int i;
int pci_dev_busy = 0;
- u32 tmp;
- u8 cls;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
@@ -630,42 +679,8 @@ static int sil_init_one (struct pci_dev
ata_std_ports(&probe_ent->port[i]);
}
- /* Initialize FIFO PCI bus arbitration */
- cls = sil_get_device_cache_line(pdev);
- if (cls) {
- cls >>= 3;
- cls++; /* cls = (line_size/8)+1 */
- for (i = 0; i < probe_ent->n_ports; i++)
- writew(cls << 8 | cls,
- mmio_base + sil_port[i].fifo_cfg);
- } else
- dev_printk(KERN_WARNING, &pdev->dev,
- "cache line size not set. Driver may not function\n");
-
- /* Apply R_ERR on DMA activate FIS errata workaround */
- if (probe_ent->host_flags & SIL_FLAG_RERR_ON_DMA_ACT) {
- int cnt;
-
- for (i = 0, cnt = 0; i < probe_ent->n_ports; i++) {
- tmp = readl(mmio_base + sil_port[i].sfis_cfg);
- if ((tmp & 0x3) != 0x01)
- continue;
- if (!cnt)
- dev_printk(KERN_INFO, &pdev->dev,
- "Applying R_ERR on DMA activate "
- "FIS errata fix\n");
- writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg);
- cnt++;
- }
- }
-
- if (ent->driver_data == sil_3114) {
- /* flip the magic "make 4 ports work" bit */
- tmp = readl(mmio_base + sil_port[2].bmdma);
- if ((tmp & SIL_INTR_STEERING) == 0)
- writel(tmp | SIL_INTR_STEERING,
- mmio_base + sil_port[2].bmdma);
- }
+ sil_init_controller(pdev, probe_ent->n_ports, probe_ent->host_flags,
+ mmio_base);
pci_set_master(pdev);
@@ -685,6 +700,18 @@ err_out:
return rc;
}
+static int sil_pci_device_resume(struct pci_dev *pdev)
+{
+ struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev);
+
+ ata_pci_device_do_resume(pdev);
+ sil_init_controller(pdev, host_set->n_ports, host_set->ports[0]->flags,
+ host_set->mmio_base);
+ ata_host_set_resume(host_set);
+
+ return 0;
+}
+
static int __init sil_init(void)
{
return pci_module_init(&sil_pci_driver);
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index 07a1c6a..2e0f4a4 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -92,6 +92,7 @@ enum {
HOST_CTRL_STOP = (1 << 18), /* latched PCI STOP */
HOST_CTRL_DEVSEL = (1 << 19), /* latched PCI DEVSEL */
HOST_CTRL_REQ64 = (1 << 20), /* latched PCI REQ64 */
+ HOST_CTRL_GLOBAL_RST = (1 << 31), /* global reset */
/*
* Port registers
@@ -338,6 +339,7 @@ static int sil24_port_start(struct ata_p
static void sil24_port_stop(struct ata_port *ap);
static void sil24_host_stop(struct ata_host_set *host_set);
static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
+static int sil24_pci_device_resume(struct pci_dev *pdev);
static const struct pci_device_id sil24_pci_tbl[] = {
{ 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 },
@@ -353,6 +355,8 @@ static struct pci_driver sil24_pci_drive
.id_table = sil24_pci_tbl,
.probe = sil24_init_one,
.remove = ata_pci_remove_one, /* safe? */
+ .suspend = ata_pci_device_suspend,
+ .resume = sil24_pci_device_resume,
};
static struct scsi_host_template sil24_sht = {
@@ -372,6 +376,8 @@ static struct scsi_host_template sil24_s
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+ .suspend = ata_scsi_device_suspend,
+ .resume = ata_scsi_device_resume,
};
static const struct ata_port_operations sil24_ops = {
@@ -607,7 +613,7 @@ static int sil24_hardreset(struct ata_po
/* SStatus oscillates between zero and valid status after
* DEV_RST, debounce it.
*/
- rc = sata_phy_debounce(ap, sata_deb_timing_before_fsrst);
+ rc = sata_phy_debounce(ap, sata_deb_timing_long);
if (rc) {
reason = "PHY debouncing failed";
goto err;
@@ -988,6 +994,64 @@ static void sil24_host_stop(struct ata_h
kfree(hpriv);
}
+static void sil24_init_controller(struct pci_dev *pdev, int n_ports,
+ unsigned long host_flags,
+ void __iomem *host_base,
+ void __iomem *port_base)
+{
+ u32 tmp;
+ int i;
+
+ /* GPIO off */
+ writel(0, host_base + HOST_FLASH_CMD);
+
+ /* clear global reset & mask interrupts during initialization */
+ writel(0, host_base + HOST_CTRL);
+
+ /* init ports */
+ for (i = 0; i < n_ports; i++) {
+ void __iomem *port = port_base + i * PORT_REGS_SIZE;
+
+ /* Initial PHY setting */
+ writel(0x20c, port + PORT_PHY_CFG);
+
+ /* Clear port RST */
+ tmp = readl(port + PORT_CTRL_STAT);
+ if (tmp & PORT_CS_PORT_RST) {
+ writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
+ tmp = ata_wait_register(port + PORT_CTRL_STAT,
+ PORT_CS_PORT_RST,
+ PORT_CS_PORT_RST, 10, 100);
+ if (tmp & PORT_CS_PORT_RST)
+ dev_printk(KERN_ERR, &pdev->dev,
+ "failed to clear port RST\n");
+ }
+
+ /* Configure IRQ WoC */
+ if (host_flags & SIL24_FLAG_PCIX_IRQ_WOC)
+ writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT);
+ else
+ writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
+
+ /* Zero error counters. */
+ writel(0x8000, port + PORT_DECODE_ERR_THRESH);
+ writel(0x8000, port + PORT_CRC_ERR_THRESH);
+ writel(0x8000, port + PORT_HSHK_ERR_THRESH);
+ writel(0x0000, port + PORT_DECODE_ERR_CNT);
+ writel(0x0000, port + PORT_CRC_ERR_CNT);
+ writel(0x0000, port + PORT_HSHK_ERR_CNT);
+
+ /* Always use 64bit activation */
+ writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
+
+ /* Clear port multiplier enable and resume bits */
+ writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR);
+ }
+
+ /* Turn on interrupts */
+ writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL);
+}
+
static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version = 0;
@@ -1076,9 +1140,6 @@ static int sil24_init_one(struct pci_dev
}
}
- /* GPIO off */
- writel(0, host_base + HOST_FLASH_CMD);
-
/* Apply workaround for completion IRQ loss on PCI-X errata */
if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC) {
tmp = readl(host_base + HOST_CTRL);
@@ -1090,56 +1151,18 @@ static int sil24_init_one(struct pci_dev
probe_ent->host_flags &= ~SIL24_FLAG_PCIX_IRQ_WOC;
}
- /* clear global reset & mask interrupts during initialization */
- writel(0, host_base + HOST_CTRL);
-
for (i = 0; i < probe_ent->n_ports; i++) {
- void __iomem *port = port_base + i * PORT_REGS_SIZE;
- unsigned long portu = (unsigned long)port;
+ unsigned long portu =
+ (unsigned long)port_base + i * PORT_REGS_SIZE;
probe_ent->port[i].cmd_addr = portu;
probe_ent->port[i].scr_addr = portu + PORT_SCONTROL;
ata_std_ports(&probe_ent->port[i]);
-
- /* Initial PHY setting */
- writel(0x20c, port + PORT_PHY_CFG);
-
- /* Clear port RST */
- tmp = readl(port + PORT_CTRL_STAT);
- if (tmp & PORT_CS_PORT_RST) {
- writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
- tmp = ata_wait_register(port + PORT_CTRL_STAT,
- PORT_CS_PORT_RST,
- PORT_CS_PORT_RST, 10, 100);
- if (tmp & PORT_CS_PORT_RST)
- dev_printk(KERN_ERR, &pdev->dev,
- "failed to clear port RST\n");
- }
-
- /* Configure IRQ WoC */
- if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC)
- writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT);
- else
- writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
-
- /* Zero error counters. */
- writel(0x8000, port + PORT_DECODE_ERR_THRESH);
- writel(0x8000, port + PORT_CRC_ERR_THRESH);
- writel(0x8000, port + PORT_HSHK_ERR_THRESH);
- writel(0x0000, port + PORT_DECODE_ERR_CNT);
- writel(0x0000, port + PORT_CRC_ERR_CNT);
- writel(0x0000, port + PORT_HSHK_ERR_CNT);
-
- /* Always use 64bit activation */
- writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
-
- /* Clear port multiplier enable and resume bits */
- writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR);
}
- /* Turn on interrupts */
- writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL);
+ sil24_init_controller(pdev, probe_ent->n_ports, probe_ent->host_flags,
+ host_base, port_base);
pci_set_master(pdev);
@@ -1162,6 +1185,25 @@ static int sil24_init_one(struct pci_dev
return rc;
}
+static int sil24_pci_device_resume(struct pci_dev *pdev)
+{
+ struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev);
+ struct sil24_host_priv *hpriv = host_set->private_data;
+
+ ata_pci_device_do_resume(pdev);
+
+ if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND)
+ writel(HOST_CTRL_GLOBAL_RST, hpriv->host_base + HOST_CTRL);
+
+ sil24_init_controller(pdev, host_set->n_ports,
+ host_set->ports[0]->flags,
+ hpriv->host_base, hpriv->port_base);
+
+ ata_host_set_resume(host_set);
+
+ return 0;
+}
+
static int __init sil24_init(void)
{
return pci_module_init(&sil24_pci_driver);
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index 916fe6f..ad37871 100644
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -297,7 +297,7 @@ static const struct ata_port_operations
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_pio_data_xfer,
+ .data_xfer = ata_mmio_data_xfer,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
diff --git a/include/linux/libata.h b/include/linux/libata.h
index f4284bf..6cc497a 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -131,6 +131,7 @@ enum {
ATA_DFLAG_CFG_MASK = (1 << 8) - 1,
ATA_DFLAG_PIO = (1 << 8), /* device currently in PIO mode */
+ ATA_DFLAG_SUSPENDED = (1 << 9), /* device suspended */
ATA_DFLAG_INIT_MASK = (1 << 16) - 1,
ATA_DFLAG_DETACH = (1 << 16),
@@ -160,22 +161,28 @@ enum {
ATA_FLAG_HRST_TO_RESUME = (1 << 11), /* hardreset to resume phy */
ATA_FLAG_SKIP_D2H_BSY = (1 << 12), /* can't wait for the first D2H
* Register FIS clearing BSY */
-
ATA_FLAG_DEBUGMSG = (1 << 13),
- ATA_FLAG_FLUSH_PORT_TASK = (1 << 14), /* flush port task */
- ATA_FLAG_EH_PENDING = (1 << 15), /* EH pending */
- ATA_FLAG_EH_IN_PROGRESS = (1 << 16), /* EH in progress */
- ATA_FLAG_FROZEN = (1 << 17), /* port is frozen */
- ATA_FLAG_RECOVERED = (1 << 18), /* recovery action performed */
- ATA_FLAG_LOADING = (1 << 19), /* boot/loading probe */
- ATA_FLAG_UNLOADING = (1 << 20), /* module is unloading */
- ATA_FLAG_SCSI_HOTPLUG = (1 << 21), /* SCSI hotplug scheduled */
+ /* The following flag belongs to ap->pflags but is kept in
+ * ap->flags because it's referenced in many LLDs and will be
+ * removed in not-too-distant future.
+ */
+ ATA_FLAG_DISABLED = (1 << 23), /* port is disabled, ignore it */
+
+ /* bits 24:31 of ap->flags are reserved for LLD specific flags */
- ATA_FLAG_DISABLED = (1 << 22), /* port is disabled, ignore it */
- ATA_FLAG_SUSPENDED = (1 << 23), /* port is suspended (power) */
+ /* struct ata_port pflags */
+ ATA_PFLAG_EH_PENDING = (1 << 0), /* EH pending */
+ ATA_PFLAG_EH_IN_PROGRESS = (1 << 1), /* EH in progress */
+ ATA_PFLAG_FROZEN = (1 << 2), /* port is frozen */
+ ATA_PFLAG_RECOVERED = (1 << 3), /* recovery action performed */
+ ATA_PFLAG_LOADING = (1 << 4), /* boot/loading probe */
+ ATA_PFLAG_UNLOADING = (1 << 5), /* module is unloading */
+ ATA_PFLAG_SCSI_HOTPLUG = (1 << 6), /* SCSI hotplug scheduled */
- /* bits 24:31 of ap->flags are reserved for LLDD specific flags */
+ ATA_PFLAG_FLUSH_PORT_TASK = (1 << 16), /* flush port task */
+ ATA_PFLAG_SUSPENDED = (1 << 17), /* port is suspended (power) */
+ ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */
/* struct ata_queued_cmd flags */
ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */
@@ -248,12 +255,19 @@ enum {
ATA_EH_REVALIDATE = (1 << 0),
ATA_EH_SOFTRESET = (1 << 1),
ATA_EH_HARDRESET = (1 << 2),
+ ATA_EH_SUSPEND = (1 << 3),
+ ATA_EH_RESUME = (1 << 4),
+ ATA_EH_PM_FREEZE = (1 << 5),
ATA_EH_RESET_MASK = ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
- ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE,
+ ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE | ATA_EH_SUSPEND |
+ ATA_EH_RESUME | ATA_EH_PM_FREEZE,
/* ata_eh_info->flags */
ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */
+ ATA_EHI_RESUME_LINK = (1 << 1), /* need to resume link */
+ ATA_EHI_NO_AUTOPSY = (1 << 2), /* no autopsy */
+ ATA_EHI_QUIET = (1 << 3), /* be quiet */
ATA_EHI_DID_RESET = (1 << 16), /* already reset this port */
@@ -486,6 +500,7 @@ struct ata_port {
const struct ata_port_operations *ops;
spinlock_t *lock;
unsigned long flags; /* ATA_FLAG_xxx */
+ unsigned int pflags; /* ATA_PFLAG_xxx */
unsigned int id; /* unique id req'd by scsi midlyr */
unsigned int port_no; /* unique port #; from zero */
unsigned int hard_port_no; /* hardware port #; from zero */
@@ -535,6 +550,9 @@ struct ata_port {
struct list_head eh_done_q;
wait_queue_head_t eh_wait_q;
+ pm_message_t pm_mesg;
+ int *pm_result;
+
void *private_data;
u8 sector_buf[ATA_SECT_SIZE]; /* owned by EH */
@@ -589,6 +607,9 @@ struct ata_port_operations {
void (*scr_write) (struct ata_port *ap, unsigned int sc_reg,
u32 val);
+ int (*port_suspend) (struct ata_port *ap, pm_message_t mesg);
+ int (*port_resume) (struct ata_port *ap);
+
int (*port_start) (struct ata_port *ap);
void (*port_stop) (struct ata_port *ap);
@@ -622,9 +643,18 @@ struct ata_timing {
#define FIT(v,vmin,vmax) max_t(short,min_t(short,v,vmax),vmin)
-extern const unsigned long sata_deb_timing_boot[];
-extern const unsigned long sata_deb_timing_eh[];
-extern const unsigned long sata_deb_timing_before_fsrst[];
+extern const unsigned long sata_deb_timing_normal[];
+extern const unsigned long sata_deb_timing_hotplug[];
+extern const unsigned long sata_deb_timing_long[];
+
+static inline const unsigned long *
+sata_ehc_deb_timing(struct ata_eh_context *ehc)
+{
+ if (ehc->i.flags & ATA_EHI_HOTPLUGGED)
+ return sata_deb_timing_hotplug;
+ else
+ return sata_deb_timing_normal;
+}
extern void ata_port_probe(struct ata_port *);
extern void __sata_phy_reset(struct ata_port *ap);
@@ -644,6 +674,8 @@ #ifdef CONFIG_PCI
extern int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
unsigned int n_ports);
extern void ata_pci_remove_one (struct pci_dev *pdev);
+extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t state);
+extern void ata_pci_device_do_resume(struct pci_dev *pdev);
extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state);
extern int ata_pci_device_resume(struct pci_dev *pdev);
extern int ata_pci_clear_simplex(struct pci_dev *pdev);
@@ -664,8 +696,9 @@ extern int ata_port_online(struct ata_po
extern int ata_port_offline(struct ata_port *ap);
extern int ata_scsi_device_resume(struct scsi_device *);
extern int ata_scsi_device_suspend(struct scsi_device *, pm_message_t state);
-extern int ata_device_resume(struct ata_device *);
-extern int ata_device_suspend(struct ata_device *, pm_message_t state);
+extern int ata_host_set_suspend(struct ata_host_set *host_set,
+ pm_message_t mesg);
+extern void ata_host_set_resume(struct ata_host_set *host_set);
extern int ata_ratelimit(void);
extern unsigned int ata_busy_sleep(struct ata_port *ap,
unsigned long timeout_pat,
@@ -825,19 +858,24 @@ #define ata_ehi_clear_desc(ehi) do { \
(ehi)->desc_len = 0; \
} while (0)
-static inline void ata_ehi_hotplugged(struct ata_eh_info *ehi)
+static inline void __ata_ehi_hotplugged(struct ata_eh_info *ehi)
{
if (ehi->flags & ATA_EHI_HOTPLUGGED)
return;
- ehi->flags |= ATA_EHI_HOTPLUGGED;
+ ehi->flags |= ATA_EHI_HOTPLUGGED | ATA_EHI_RESUME_LINK;
ehi->hotplug_timestamp = jiffies;
- ehi->err_mask |= AC_ERR_ATA_BUS;
ehi->action |= ATA_EH_SOFTRESET;
ehi->probe_mask |= (1 << ATA_MAX_DEVICES) - 1;
}
+static inline void ata_ehi_hotplugged(struct ata_eh_info *ehi)
+{
+ __ata_ehi_hotplugged(ehi);
+ ehi->err_mask |= AC_ERR_ATA_BUS;
+}
+
/*
* qc helpers
*/
@@ -921,6 +959,11 @@ static inline unsigned int ata_dev_absen
return ata_class_absent(dev->class);
}
+static inline unsigned int ata_dev_ready(const struct ata_device *dev)
+{
+ return ata_dev_enabled(dev) && !(dev->flags & ATA_DFLAG_SUSPENDED);
+}
+
/*
* port helpers
*/
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 685081c..c09396d 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2019,6 +2019,13 @@ #define PCI_VENDOR_ID_TOPSPIN 0x1867
#define PCI_VENDOR_ID_TDI 0x192E
#define PCI_DEVICE_ID_TDI_EHCI 0x0101
+#define PCI_VENDOR_ID_JMICRON 0x197B
+#define PCI_DEVICE_ID_JMICRON_JMB360 0x2360
+#define PCI_DEVICE_ID_JMICRON_JMB361 0x2361
+#define PCI_DEVICE_ID_JMICRON_JMB363 0x2363
+#define PCI_DEVICE_ID_JMICRON_JMB365 0x2365
+#define PCI_DEVICE_ID_JMICRON_JMB366 0x2366
+#define PCI_DEVICE_ID_JMICRON_JMB368 0x2368
#define PCI_VENDOR_ID_TEKRAM 0x1de1
#define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/