Re: [PATCH] update MMConfig patches w/915 support

[Jesse Barnes]

On Sunday, January 07, 2007 11:42 am, Jesse Barnes wrote:
> This patch updates Oliver's MMConfig bridge detection patches with
> support for 915G bridges.  It seems to work ok on my 915GM laptop.
>
> I also tried adding 965 support, but it doesn't work (at least not on my
> G965 box).  When I enable MMConfig support when the register value is
> 0xf00000003 (should be a 256M enabled window at 0xf0000000) the box
> hangs at boot, so I'm not sure what I'm doing wrong...

For reference, here's the probe routine I tried for 965, probably something 
dumb wrong with it that I'm not seeing atm.

static __init const char *pci_mmcfg_intel_965(void)
{
	u64 pciexbar, mask = 0, len = 0;
	u32 lo, hi;

	pci_mmcfg_config_num = 1;

	pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0x60, 4, &lo);
	pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0x64, 4, &hi);
	pciexbar = ((u64)hi << 32) | lo;

	/* Enable bit */
	if (!(pciexbar & 1))
		pci_mmcfg_config_num = 0;

	/* Size bits */
	switch ((pciexbar >> 1) & 3) {
	case 0:
		mask = 0xff0000000UL;
		len  = 0x10000000U;
		break;
	case 1:
		mask = 0xff8000000UL;
		len  = 0x08000000U;
		break;
	case 2:
		mask = 0xffc000000UL;
		len  = 0x04000000U;
		break;
	default:
		pci_mmcfg_config_num = 0;
	}

	if (pci_mmcfg_config_num) {
		pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]),
					   GFP_KERNEL);
		pci_mmcfg_config[0].base_address = pciexbar & mask;
		pci_mmcfg_config[0].pci_segment_group_number = 0;
		pci_mmcfg_config[0].start_bus_number = 0;
		pci_mmcfg_config[0].end_bus_number = (len >> 20) - 1;
	}

	return "Intel Corporation G965 Express Memory Controller Hub";
}

Thanks,
Jesse

P.S.  Hooray for Intel for publishing their bridge specs!  Makes stuff like 
this a bit easier.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/