On 2/6/07, Manu Abraham <abraham.manu@xxxxxxxxx> wrote:
> On 2/6/07, Luming Yu <luming.yu@xxxxxxxxx> wrote:
> > > dang !
> > >
> > > rebooted it into 2.6.17.7
> > >
> > > no errors, during a bootup, BIST isn't running anymore
> > > running M$ did change the status from dead to alive ??? shocked !!
> >
> > Interesting! does windows driver fixes the broken firmware/flash on this card?
>
>
> No firmware/flash on the card.
>
>
> >
> > >
> > > attached lspci output in the very same setup as earlier, no difference
> > > in anything, except that it was rebooted into windows.
> > >
> > > the PCI config dump would help ?
> > >
> >
> > I guess you would never reproduce this issue again unless you can
> > restore the broken firmware/flash on this card. :-)
> >
>
> none on the card, a flash or a firmware .. it has a 24c02 EEPROM for
> vendor information, that's all
>
You can see the same from this picture
-
regards,
manu