Re: 2.6.20 PCI Cannot allocate resource region 2

From: Manu Abraham
Date: Tue Feb 06 2007 - 07:56:36 EST


On 2/6/07, Manu Abraham <abraham.manu@xxxxxxxxx> wrote:
On 2/6/07, Luming Yu <luming.yu@xxxxxxxxx> wrote:
> > dang !
> >
> > rebooted it into 2.6.17.7
> >
> > no errors, during a bootup, BIST isn't running anymore
> > running M$ did change the status from dead to alive ??? shocked !!
>
> Interesting! does windows driver fixes the broken firmware/flash on this card?


No firmware/flash on the card.


>
> >
> > attached lspci output in the very same setup as earlier, no difference
> > in anything, except that it was rebooted into windows.
> >
> > the PCI config dump would help ?
> >
>
> I guess you would never reproduce this issue again unless you can
> restore the broken firmware/flash on this card. :-)
>

none on the card, a flash or a firmware .. it has a 24c02 EEPROM for
vendor information, that's all


You can see the same from this picture

regards,
manu
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/