Re: PCI riser cards and PCI irq routing, etc

[Krzysztof Halasa]

Udo van den Heuvel <udovdh@xxxxxxxxx> writes:

> Is the situation, with default DN setting of 19 as displayed below,
> `normal` w.r.t. interrupts?
> I mean: Both the DVB card with DN19 and the Unichrome Pro video adapter
> have the same irq although they are on different busses.

It's normal (and consistent with EPIA-M). The first UHCI USB (#0)
could get it, too (but it may be connected differently with IO-APIC,
I haven't checked).

> How can I find out what INT_A/B/C/D line is mapped to what irq?

That "INT_A/B/C/D" stuff depends on the point of view. In the BIOS
setup you can select some IRQs (which Linux could change anyway)
but it's a chipset-centric view (not very useful here).

Every PCI card have INT_A/B/C/D signals and they are (may be) remapped
on the riser card and on the motherboard.
-- 
Krzysztof Halasa
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/