Re: [PATCH] fix cyclades.h for x86_64 (and probably others)
From: Klaus Kudielka
Date: Thu Mar 15 2007 - 19:21:28 EST
On Thu, Mar 15, 2007 at 11:07:08AM -0800, Andrew Morton wrote:
> Looks OK, thanks.
>
> It would be nice as a followup patch to simply remove ucchar, uclong and
> all that gunk altogether from that driver and just use u8, u16 etc.
>
> But if you decide to do that, please fix your email client first - it is
> replacing tabs with spaces.
Something like this? Applies & compiles Ok on 2.6.20.
I don't have access to the hardware right now, but am pretty sure that
the result is the same.
BTW, it was a copy-paste which made the spaces ;)
Regards, Klaus
--- include/linux/cyclades.h.orig 2007-03-15 23:46:00.000000000 +0100
+++ include/linux/cyclades.h 2007-03-15 23:14:26.000000000 +0100
@@ -67,6 +67,8 @@
#ifndef _LINUX_CYCLADES_H
#define _LINUX_CYCLADES_H
+#include <linux/types.h>
+
struct cyclades_monitor {
unsigned long int_count;
unsigned long char_count;
@@ -149,15 +151,6 @@
* architectures and compilers.
*/
-#if defined(__alpha__)
-typedef unsigned long ucdouble; /* 64 bits, unsigned */
-typedef unsigned int uclong; /* 32 bits, unsigned */
-#else
-typedef unsigned long uclong; /* 32 bits, unsigned */
-#endif
-typedef unsigned short ucshort; /* 16 bits, unsigned */
-typedef unsigned char ucchar; /* 8 bits, unsigned */
-
/*
* Memory Window Sizes
*/
@@ -174,24 +167,24 @@
*/
struct CUSTOM_REG {
- uclong fpga_id; /* FPGA Identification Register */
- uclong fpga_version; /* FPGA Version Number Register */
- uclong cpu_start; /* CPU start Register (write) */
- uclong cpu_stop; /* CPU stop Register (write) */
- uclong misc_reg; /* Miscelaneous Register */
- uclong idt_mode; /* IDT mode Register */
- uclong uart_irq_status; /* UART IRQ status Register */
- uclong clear_timer0_irq; /* Clear timer interrupt Register */
- uclong clear_timer1_irq; /* Clear timer interrupt Register */
- uclong clear_timer2_irq; /* Clear timer interrupt Register */
- uclong test_register; /* Test Register */
- uclong test_count; /* Test Count Register */
- uclong timer_select; /* Timer select register */
- uclong pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */
- uclong ram_wait_state; /* RAM wait-state Register */
- uclong uart_wait_state; /* UART wait-state Register */
- uclong timer_wait_state; /* timer wait-state Register */
- uclong ack_wait_state; /* ACK wait State Register */
+ __u32 fpga_id; /* FPGA Identification Register */
+ __u32 fpga_version; /* FPGA Version Number Register */
+ __u32 cpu_start; /* CPU start Register (write) */
+ __u32 cpu_stop; /* CPU stop Register (write) */
+ __u32 misc_reg; /* Miscelaneous Register */
+ __u32 idt_mode; /* IDT mode Register */
+ __u32 uart_irq_status; /* UART IRQ status Register */
+ __u32 clear_timer0_irq; /* Clear timer interrupt Register */
+ __u32 clear_timer1_irq; /* Clear timer interrupt Register */
+ __u32 clear_timer2_irq; /* Clear timer interrupt Register */
+ __u32 test_register; /* Test Register */
+ __u32 test_count; /* Test Count Register */
+ __u32 timer_select; /* Timer select register */
+ __u32 pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */
+ __u32 ram_wait_state; /* RAM wait-state Register */
+ __u32 uart_wait_state; /* UART wait-state Register */
+ __u32 timer_wait_state; /* timer wait-state Register */
+ __u32 ack_wait_state; /* ACK wait State Register */
};
/*
@@ -201,34 +194,34 @@
*/
struct RUNTIME_9060 {
- uclong loc_addr_range; /* 00h - Local Address Range */
- uclong loc_addr_base; /* 04h - Local Address Base */
- uclong loc_arbitr; /* 08h - Local Arbitration */
- uclong endian_descr; /* 0Ch - Big/Little Endian Descriptor */
- uclong loc_rom_range; /* 10h - Local ROM Range */
- uclong loc_rom_base; /* 14h - Local ROM Base */
- uclong loc_bus_descr; /* 18h - Local Bus descriptor */
- uclong loc_range_mst; /* 1Ch - Local Range for Master to PCI */
- uclong loc_base_mst; /* 20h - Local Base for Master PCI */
- uclong loc_range_io; /* 24h - Local Range for Master IO */
- uclong pci_base_mst; /* 28h - PCI Base for Master PCI */
- uclong pci_conf_io; /* 2Ch - PCI configuration for Master IO */
- uclong filler1; /* 30h */
- uclong filler2; /* 34h */
- uclong filler3; /* 38h */
- uclong filler4; /* 3Ch */
- uclong mail_box_0; /* 40h - Mail Box 0 */
- uclong mail_box_1; /* 44h - Mail Box 1 */
- uclong mail_box_2; /* 48h - Mail Box 2 */
- uclong mail_box_3; /* 4Ch - Mail Box 3 */
- uclong filler5; /* 50h */
- uclong filler6; /* 54h */
- uclong filler7; /* 58h */
- uclong filler8; /* 5Ch */
- uclong pci_doorbell; /* 60h - PCI to Local Doorbell */
- uclong loc_doorbell; /* 64h - Local to PCI Doorbell */
- uclong intr_ctrl_stat; /* 68h - Interrupt Control/Status */
- uclong init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */
+ __u32 loc_addr_range; /* 00h - Local Address Range */
+ __u32 loc_addr_base; /* 04h - Local Address Base */
+ __u32 loc_arbitr; /* 08h - Local Arbitration */
+ __u32 endian_descr; /* 0Ch - Big/Little Endian Descriptor */
+ __u32 loc_rom_range; /* 10h - Local ROM Range */
+ __u32 loc_rom_base; /* 14h - Local ROM Base */
+ __u32 loc_bus_descr; /* 18h - Local Bus descriptor */
+ __u32 loc_range_mst; /* 1Ch - Local Range for Master to PCI */
+ __u32 loc_base_mst; /* 20h - Local Base for Master PCI */
+ __u32 loc_range_io; /* 24h - Local Range for Master IO */
+ __u32 pci_base_mst; /* 28h - PCI Base for Master PCI */
+ __u32 pci_conf_io; /* 2Ch - PCI configuration for Master IO */
+ __u32 filler1; /* 30h */
+ __u32 filler2; /* 34h */
+ __u32 filler3; /* 38h */
+ __u32 filler4; /* 3Ch */
+ __u32 mail_box_0; /* 40h - Mail Box 0 */
+ __u32 mail_box_1; /* 44h - Mail Box 1 */
+ __u32 mail_box_2; /* 48h - Mail Box 2 */
+ __u32 mail_box_3; /* 4Ch - Mail Box 3 */
+ __u32 filler5; /* 50h */
+ __u32 filler6; /* 54h */
+ __u32 filler7; /* 58h */
+ __u32 filler8; /* 5Ch */
+ __u32 pci_doorbell; /* 60h - PCI to Local Doorbell */
+ __u32 loc_doorbell; /* 64h - Local to PCI Doorbell */
+ __u32 intr_ctrl_stat; /* 68h - Interrupt Control/Status */
+ __u32 init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */
};
/* Values for the Local Base Address re-map register */
@@ -270,8 +263,8 @@
#define ZF_TINACT ZF_TINACT_DEF
struct FIRM_ID {
- uclong signature; /* ZFIRM/U signature */
- uclong zfwctrl_addr; /* pointer to ZFW_CTRL structure */
+ __u32 signature; /* ZFIRM/U signature */
+ __u32 zfwctrl_addr; /* pointer to ZFW_CTRL structure */
};
/* Op. System id */
@@ -408,24 +401,24 @@
*/
struct CH_CTRL {
- uclong op_mode; /* operation mode */
- uclong intr_enable; /* interrupt masking */
- uclong sw_flow; /* SW flow control */
- uclong flow_status; /* output flow status */
- uclong comm_baud; /* baud rate - numerically specified */
- uclong comm_parity; /* parity */
- uclong comm_data_l; /* data length/stop */
- uclong comm_flags; /* other flags */
- uclong hw_flow; /* HW flow control */
- uclong rs_control; /* RS-232 outputs */
- uclong rs_status; /* RS-232 inputs */
- uclong flow_xon; /* xon char */
- uclong flow_xoff; /* xoff char */
- uclong hw_overflow; /* hw overflow counter */
- uclong sw_overflow; /* sw overflow counter */
- uclong comm_error; /* frame/parity error counter */
- uclong ichar;
- uclong filler[7];
+ __u32 op_mode; /* operation mode */
+ __u32 intr_enable; /* interrupt masking */
+ __u32 sw_flow; /* SW flow control */
+ __u32 flow_status; /* output flow status */
+ __u32 comm_baud; /* baud rate - numerically specified */
+ __u32 comm_parity; /* parity */
+ __u32 comm_data_l; /* data length/stop */
+ __u32 comm_flags; /* other flags */
+ __u32 hw_flow; /* HW flow control */
+ __u32 rs_control; /* RS-232 outputs */
+ __u32 rs_status; /* RS-232 inputs */
+ __u32 flow_xon; /* xon char */
+ __u32 flow_xoff; /* xoff char */
+ __u32 hw_overflow; /* hw overflow counter */
+ __u32 sw_overflow; /* sw overflow counter */
+ __u32 comm_error; /* frame/parity error counter */
+ __u32 ichar;
+ __u32 filler[7];
};
@@ -435,18 +428,18 @@
*/
struct BUF_CTRL {
- uclong flag_dma; /* buffers are in Host memory */
- uclong tx_bufaddr; /* address of the tx buffer */
- uclong tx_bufsize; /* tx buffer size */
- uclong tx_threshold; /* tx low water mark */
- uclong tx_get; /* tail index tx buf */
- uclong tx_put; /* head index tx buf */
- uclong rx_bufaddr; /* address of the rx buffer */
- uclong rx_bufsize; /* rx buffer size */
- uclong rx_threshold; /* rx high water mark */
- uclong rx_get; /* tail index rx buf */
- uclong rx_put; /* head index rx buf */
- uclong filler[5]; /* filler to align structures */
+ __u32 flag_dma; /* buffers are in Host memory */
+ __u32 tx_bufaddr; /* address of the tx buffer */
+ __u32 tx_bufsize; /* tx buffer size */
+ __u32 tx_threshold; /* tx low water mark */
+ __u32 tx_get; /* tail index tx buf */
+ __u32 tx_put; /* head index tx buf */
+ __u32 rx_bufaddr; /* address of the rx buffer */
+ __u32 rx_bufsize; /* rx buffer size */
+ __u32 rx_threshold; /* rx high water mark */
+ __u32 rx_get; /* tail index rx buf */
+ __u32 rx_put; /* head index rx buf */
+ __u32 filler[5]; /* filler to align structures */
};
/*
@@ -457,27 +450,27 @@
struct BOARD_CTRL {
/* static info provided by the on-board CPU */
- uclong n_channel; /* number of channels */
- uclong fw_version; /* firmware version */
+ __u32 n_channel; /* number of channels */
+ __u32 fw_version; /* firmware version */
/* static info provided by the driver */
- uclong op_system; /* op_system id */
- uclong dr_version; /* driver version */
+ __u32 op_system; /* op_system id */
+ __u32 dr_version; /* driver version */
/* board control area */
- uclong inactivity; /* inactivity control */
+ __u32 inactivity; /* inactivity control */
/* host to FW commands */
- uclong hcmd_channel; /* channel number */
- uclong hcmd_param; /* pointer to parameters */
+ __u32 hcmd_channel; /* channel number */
+ __u32 hcmd_param; /* pointer to parameters */
/* FW to Host commands */
- uclong fwcmd_channel; /* channel number */
- uclong fwcmd_param; /* pointer to parameters */
- uclong zf_int_queue_addr; /* offset for INT_QUEUE structure */
+ __u32 fwcmd_channel; /* channel number */
+ __u32 fwcmd_param; /* pointer to parameters */
+ __u32 zf_int_queue_addr; /* offset for INT_QUEUE structure */
/* filler so the structures are aligned */
- uclong filler[6];
+ __u32 filler[6];
};
/* Host Interrupt Queue */
--- drivers/char/cyclades.c.orig 2007-03-15 23:45:08.000000000 +0100
+++ drivers/char/cyclades.c 2007-03-15 23:48:00.000000000 +0100
@@ -669,7 +669,6 @@
spin_unlock_irqrestore(&cy_card[info->card].card_lock, flags); \
} while (0)
-#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/pci.h>
@@ -844,7 +843,7 @@
static void cy_start(struct tty_struct *);
static void set_line_char(struct cyclades_port *);
-static int cyz_issue_cmd(struct cyclades_card *, uclong, ucchar, uclong);
+static int cyz_issue_cmd(struct cyclades_card *, __u32, __u8, __u32);
#ifdef CONFIG_ISA
static unsigned detect_isa_irq(void __iomem *);
#endif /* CONFIG_ISA */
@@ -1497,7 +1496,7 @@
static int
cyz_fetch_msg(struct cyclades_card *cinfo,
- uclong * channel, ucchar * cmd, uclong * param)
+ __u32 * channel, __u8 * cmd, __u32 * param)
{
struct FIRM_ID __iomem *firm_id;
struct ZFW_CTRL __iomem *zfw_ctrl;
@@ -1517,7 +1516,7 @@
if (loc_doorbell) {
*cmd = (char)(0xff & loc_doorbell);
*channel = cy_readl(&board_ctrl->fwcmd_channel);
- *param = (uclong) cy_readl(&board_ctrl->fwcmd_param);
+ *param = (__u32) cy_readl(&board_ctrl->fwcmd_param);
cy_writel(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->
loc_doorbell, 0xffffffff);
return 1;
@@ -1527,12 +1526,12 @@
static int
cyz_issue_cmd(struct cyclades_card *cinfo,
- uclong channel, ucchar cmd, uclong param)
+ __u32 channel, __u8 cmd, __u32 param)
{
struct FIRM_ID __iomem *firm_id;
struct ZFW_CTRL __iomem *zfw_ctrl;
struct BOARD_CTRL __iomem *board_ctrl;
- unsigned long __iomem *pci_doorbell;
+ __u32 __iomem *pci_doorbell;
int index;
firm_id = cinfo->base_addr + ID_ADDRESS;
@@ -1573,7 +1572,7 @@
#else
char data;
#endif
- volatile uclong rx_put, rx_get, new_rx_get, rx_bufsize, rx_bufaddr;
+ volatile __u32 rx_put, rx_get, new_rx_get, rx_bufsize, rx_bufaddr;
rx_get = new_rx_get = cy_readl(&buf_ctrl->rx_get);
rx_put = cy_readl(&buf_ctrl->rx_put);
@@ -1669,7 +1668,7 @@
#ifdef BLOCKMOVE
int small_count;
#endif
- volatile uclong tx_put, tx_get, tx_bufsize, tx_bufaddr;
+ volatile __u32 tx_put, tx_get, tx_bufsize, tx_bufaddr;
if (info->xmit_cnt <= 0) /* Nothing to transmit */
return;
@@ -1754,10 +1753,10 @@
static volatile struct BOARD_CTRL __iomem *board_ctrl;
static volatile struct CH_CTRL __iomem *ch_ctrl;
static volatile struct BUF_CTRL __iomem *buf_ctrl;
- uclong channel;
- ucchar cmd;
- uclong param;
- uclong hw_ver, fw_ver;
+ __u32 channel;
+ __u8 cmd;
+ __u32 param;
+ __u32 hw_ver, fw_ver;
int special_count;
int delta_count;
@@ -1891,7 +1890,7 @@
struct cyclades_port *info = (struct cyclades_port *)arg;
int retval;
int card = info->card;
- uclong channel = (info->line) - (cy_card[card].first_line);
+ __u32 channel = (info->line) - (cy_card[card].first_line);
unsigned long flags;
CY_LOCK(info, flags);
@@ -2288,7 +2287,7 @@
if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
cy_writel(&ch_ctrl[channel].rs_control,
- (uclong)(cy_readl(&ch_ctrl[channel].rs_control)&
+ (__u32)(cy_readl(&ch_ctrl[channel].rs_control)&
~(C_RS_RTS | C_RS_DTR)));
retval = cyz_issue_cmd(&cy_card[info->card], channel,
C_CM_IOCTLM, 0L);
@@ -3025,7 +3024,7 @@
static volatile struct CH_CTRL *ch_ctrl;
static volatile struct BUF_CTRL *buf_ctrl;
int char_count;
- volatile uclong tx_put, tx_get, tx_bufsize;
+ volatile __u32 tx_put, tx_get, tx_bufsize;
firm_id = cy_card[card].base_addr + ID_ADDRESS;
zfw_ctrl = cy_card[card].base_addr +
@@ -3054,10 +3053,10 @@
* ------------------------------------------------------------
*/
-static void cyy_baud_calc(struct cyclades_port *info, uclong baud)
+static void cyy_baud_calc(struct cyclades_port *info, __u32 baud)
{
int co, co_val, bpr;
- uclong cy_clock = ((info->chip_rev >= CD1400_REV_J) ? 60000000 :
+ __u32 cy_clock = ((info->chip_rev >= CD1400_REV_J) ? 60000000 :
25000000);
if (baud == 0) {
@@ -3347,7 +3346,7 @@
struct BOARD_CTRL __iomem *board_ctrl;
struct CH_CTRL __iomem *ch_ctrl;
struct BUF_CTRL __iomem *buf_ctrl;
- uclong sw_flow;
+ __u32 sw_flow;
int retval;
firm_id = cy_card[card].base_addr + ID_ADDRESS;
@@ -4720,7 +4719,7 @@
#endif /* CONFIG_ISA */
} /* cy_detect_isa */
-static void plx_init(void __iomem * addr, uclong initctl)
+static void plx_init(void __iomem * addr, __u32 initctl)
{
/* Reset PLX */
cy_writel(addr + initctl, cy_readl(addr + initctl) | 0x40000000);
@@ -4746,14 +4745,14 @@
struct pci_dev *pdev = NULL;
unsigned char cyy_rev_id;
unsigned char cy_pci_irq = 0;
- uclong cy_pci_phys0, cy_pci_phys2;
+ __u32 cy_pci_phys0, cy_pci_phys2;
void __iomem *cy_pci_addr0, *cy_pci_addr2;
unsigned short i, j, cy_pci_nchan, plx_ver;
unsigned short device_id, dev_index = 0;
- uclong mailbox;
- uclong ZeIndex = 0;
+ __u32 mailbox;
+ __u32 ZeIndex = 0;
void __iomem *Ze_addr0[NR_CARDS], *Ze_addr2[NR_CARDS];
- uclong Ze_phys0[NR_CARDS], Ze_phys2[NR_CARDS];
+ __u32 Ze_phys0[NR_CARDS], Ze_phys2[NR_CARDS];
unsigned char Ze_irq[NR_CARDS];
struct pci_dev *Ze_pdev[NR_CARDS];
@@ -4958,7 +4957,7 @@
cy_pci_irq);
mailbox =
- (uclong)cy_readl(&((struct RUNTIME_9060 __iomem *)
+ (__u32)cy_readl(&((struct RUNTIME_9060 __iomem *)
cy_pci_addr0)->mail_box_0);
if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) {
@@ -5121,7 +5120,7 @@
Ze_pdev[j] = Ze_pdev[j + 1];
}
ZeIndex--;
- mailbox = (uclong)cy_readl(&((struct RUNTIME_9060 __iomem *)
+ mailbox = (__u32)cy_readl(&((struct RUNTIME_9060 __iomem *)
cy_pci_addr0)->mail_box_0);
#ifdef CY_PCI_DEBUG
printk("Cyclades-Z/PCI: relocate winaddr=0x%lx ctladdr=0x%lx\n",