[git patches] IDE updates
From: Bartlomiej Zolnierkiewicz
Date: Thu Jul 19 2007 - 19:15:28 EST
What's in:
- host driver updates (scc_pata, atiixp, siimage, serverworks)
- various fixes for handling PIO modes
- SCSI-ioctls support for ide-floppy
- some other improvements/cleanups
Please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6.git/
to receive the following updates:
drivers/ata/pata_pcmcia.c | 1 +
drivers/ide/cris/ide-cris.c | 9 +--
drivers/ide/ide-floppy.c | 18 +++++-
drivers/ide/ide-io.c | 5 +-
drivers/ide/ide-lib.c | 72 ++++++++++++---------
drivers/ide/ide-timing.h | 20 +-----
drivers/ide/ide.c | 86 +-----------------------
drivers/ide/legacy/ali14xx.c | 7 +-
drivers/ide/legacy/dtc2278.c | 3 +-
drivers/ide/legacy/ht6560b.c | 12 ++-
drivers/ide/legacy/ide-cs.c | 1 +
drivers/ide/legacy/qd65xx.c | 21 +++---
drivers/ide/legacy/umc8672.c | 4 +-
drivers/ide/mips/au1xxx-ide.c | 4 +-
drivers/ide/pci/aec62xx.c | 18 ++----
drivers/ide/pci/alim15x3.c | 5 +-
drivers/ide/pci/amd74xx.c | 24 ++++---
drivers/ide/pci/atiixp.c | 37 ++++++----
drivers/ide/pci/cmd640.c | 19 +++---
drivers/ide/pci/cmd64x.c | 21 +++---
drivers/ide/pci/cs5520.c | 6 +-
drivers/ide/pci/cs5530.c | 4 +-
drivers/ide/pci/cs5535.c | 9 ++-
drivers/ide/pci/cy82c693.c | 5 +-
drivers/ide/pci/generic.c | 15 ----
drivers/ide/pci/hpt34x.c | 17 ++----
drivers/ide/pci/hpt366.c | 36 ++++------
drivers/ide/pci/it8213.c | 7 +-
drivers/ide/pci/it821x.c | 8 +-
drivers/ide/pci/jmicron.c | 4 +-
drivers/ide/pci/ns87415.c | 1 -
drivers/ide/pci/opti621.c | 8 +-
drivers/ide/pci/pdc202xx_new.c | 23 ++----
drivers/ide/pci/pdc202xx_old.c | 20 ++----
drivers/ide/pci/piix.c | 8 +-
drivers/ide/pci/rz1000.c | 1 -
drivers/ide/pci/sc1200.c | 43 +-----------
drivers/ide/pci/scc_pata.c | 76 +++++++++++++++++-----
drivers/ide/pci/serverworks.c | 105 +++++++++++++++---------------
drivers/ide/pci/sgiioc4.c | 3 +-
drivers/ide/pci/siimage.c | 139 ++++++++++++----------------------------
drivers/ide/pci/sis5513.c | 4 +-
drivers/ide/pci/sl82c105.c | 22 ++++---
drivers/ide/pci/slc90e66.c | 4 +-
drivers/ide/pci/tc86c001.c | 7 +-
drivers/ide/pci/triflex.c | 4 +-
drivers/ide/pci/trm290.c | 1 -
drivers/ide/pci/via82cxxx.c | 26 ++++---
drivers/ide/ppc/mpc8xx.c | 5 +-
drivers/ide/ppc/pmac.c | 16 +++--
drivers/ide/setup-pci.c | 18 ++----
include/linux/ata.h | 9 +++
include/linux/ide.h | 31 ++++++---
53 files changed, 473 insertions(+), 599 deletions(-)
Alan Cox (1):
ide: Stop mapping ROMs
Bartlomiej Zolnierkiewicz (18):
atiixp: PIO mode setup fixes
siimage: PIO mode setup fixes (take 2)
ide: make ide_get_best_pio_mode() print info if overriding PIO mode
ide: add ide_dev_has_iordy() helper (take 4)
ide: add ide_pci_device_t.host_flags (take 2)
serverworks: always tune PIO
serverworks: fix DMA
ide: ide_start_power_step() fix WRT disabling DMA
sc1200: remove stale Power Management code
ide: add ide_pio_cycle_time() helper (take 2)
ide: ide_find_best_pio_mode() fixes (take 2)
ide: drop "PIO data" argument from ide_get_best_pio_mode()
ide: remove ide_find_best_pio_mode()
ide: add PIO masks
ide-cris: handle PIO auto-tuning in tune_cris_ide()
ide: remove stale changelog/comments/TODO from ide.c
ide: remove stale changelog from setup-pci.c
ide: add support for SCSI ioctls to ide-floppy
Kou Ishizaki (1):
scc_pata.c: Workaround for errata A308 (take 2)
Kumar Gala (1):
scc_pata: Use inline function for eieio
Marcin Juszkiewicz (1):
PCMCIA: Add another MemoryCard to ide-cs/pata_pcmcia
Robert P. J. Day (1):
IDE: Remove references to dead ETRAX-related variables.
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index a56257c..6da23fe 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -382,6 +382,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
+ PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index 886091b..fbfea46 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -414,12 +414,6 @@ cris_ide_reset(unsigned val)
#ifdef CONFIG_ETRAX_IDE_G27_RESET
REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, 27, val);
#endif
-#ifdef CONFIG_ETRAX_IDE_CSE1_16_RESET
- REG_SHADOW_SET(port_cse1_addr, port_cse1_shadow, 16, val);
-#endif
-#ifdef CONFIG_ETRAX_IDE_CSP0_8_RESET
- REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, 8, val);
-#endif
#ifdef CONFIG_ETRAX_IDE_PB7_RESET
port_pb_dir_shadow = port_pb_dir_shadow |
IO_STATE(R_PORT_PB_DIR, dir7, output);
@@ -690,6 +684,8 @@ static void tune_cris_ide(ide_drive_t *drive, u8 pio)
{
int setup, strobe, hold;
+ pio = ide_get_best_pio_mode(drive, pio, 4);
+
switch(pio)
{
case 0:
@@ -820,6 +816,7 @@ init_e100_ide (void)
hwif->dma_host_on = &cris_dma_on;
hwif->dma_off_quietly = &cris_dma_off;
hwif->cbl = ATA_CBL_PATA40;
+ hwif->pio_mask = ATA_PIO4,
hwif->ultra_mask = cris_ultra_mask;
hwif->mwdma_mask = 0x07; /* Multiword DMA 0-2 */
hwif->autodma = 1;
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index a21f585..ae8e1a6 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -99,6 +99,8 @@
#include <linux/bitops.h>
#include <linux/mutex.h>
+#include <scsi/scsi_ioctl.h>
+
#include <asm/byteorder.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
@@ -2099,7 +2101,21 @@ static int idefloppy_ioctl(struct inode *inode, struct file *file,
case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS:
return idefloppy_get_format_progress(drive, argp);
}
- return generic_ide_ioctl(drive, file, bdev, cmd, arg);
+
+ /*
+ * skip SCSI_IOCTL_SEND_COMMAND (deprecated)
+ * and CDROM_SEND_PACKET (legacy) ioctls
+ */
+ if (cmd != CDROM_SEND_PACKET && cmd != SCSI_IOCTL_SEND_COMMAND)
+ err = scsi_cmd_ioctl(file, bdev->bd_disk->queue,
+ bdev->bd_disk, cmd, argp);
+ else
+ err = -ENOTTY;
+
+ if (err == -ENOTTY)
+ err = generic_ide_ioctl(drive, file, bdev, cmd, arg);
+
+ return err;
}
static int idefloppy_media_changed(struct gendisk *disk)
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index f9de798..484c50e 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -224,11 +224,12 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
* we could be smarter and check for current xfer_speed
* in struct drive etc...
*/
- if ((drive->id->capability & 1) == 0)
- break;
if (drive->hwif->ide_dma_check == NULL)
break;
drive->hwif->dma_off_quietly(drive);
+ /*
+ * TODO: respect ->using_dma setting
+ */
ide_set_dma(drive);
break;
}
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 074bb32..92a6c7b 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -249,12 +249,34 @@ static int ide_scan_pio_blacklist (char *model)
return -1;
}
+unsigned int ide_pio_cycle_time(ide_drive_t *drive, u8 pio)
+{
+ struct hd_driveid *id = drive->id;
+ int cycle_time = 0;
+
+ if (id->field_valid & 2) {
+ if (id->capability & 8)
+ cycle_time = id->eide_pio_iordy;
+ else
+ cycle_time = id->eide_pio;
+ }
+
+ /* conservative "downgrade" for all pre-ATA2 drives */
+ if (pio < 3) {
+ if (cycle_time && cycle_time < ide_pio_timings[pio].cycle_time)
+ cycle_time = 0; /* use standard timing */
+ }
+
+ return cycle_time ? cycle_time : ide_pio_timings[pio].cycle_time;
+}
+
+EXPORT_SYMBOL_GPL(ide_pio_cycle_time);
+
/**
* ide_get_best_pio_mode - get PIO mode from drive
* @drive: drive to consider
* @mode_wanted: preferred mode
* @max_mode: highest allowed mode
- * @d: PIO data
*
* This routine returns the recommended PIO settings for a given drive,
* based on the drive->id information and the ide_pio_blacklist[].
@@ -263,22 +285,18 @@ static int ide_scan_pio_blacklist (char *model)
* This is used by most chipset support modules when "auto-tuning".
*/
-u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d)
+u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
{
int pio_mode;
- int cycle_time = 0;
- int use_iordy = 0;
struct hd_driveid* id = drive->id;
int overridden = 0;
- if (mode_wanted != 255) {
- pio_mode = mode_wanted;
- use_iordy = (pio_mode > 2);
- } else if (!drive->id) {
- pio_mode = 0;
- } else if ((pio_mode = ide_scan_pio_blacklist(id->model)) != -1) {
- overridden = 1;
- use_iordy = (pio_mode > 2);
+ if (mode_wanted != 255)
+ return min_t(u8, mode_wanted, max_mode);
+
+ if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_BLACKLIST) == 0 &&
+ (pio_mode = ide_scan_pio_blacklist(id->model)) != -1) {
+ printk(KERN_INFO "%s: is on PIO blacklist\n", drive->name);
} else {
pio_mode = id->tPIO;
if (pio_mode > 2) { /* 2 is maximum allowed tPIO value */
@@ -286,9 +304,7 @@ u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_p
overridden = 1;
}
if (id->field_valid & 2) { /* drive implements ATA2? */
- if (id->capability & 8) { /* drive supports use_iordy? */
- use_iordy = 1;
- cycle_time = id->eide_pio_iordy;
+ if (id->capability & 8) { /* IORDY supported? */
if (id->eide_pio_modes & 7) {
overridden = 0;
if (id->eide_pio_modes & 4)
@@ -298,31 +314,27 @@ u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_p
else
pio_mode = 3;
}
- } else {
- cycle_time = id->eide_pio;
}
}
+ if (overridden)
+ printk(KERN_INFO "%s: tPIO > 2, assuming tPIO = 2\n",
+ drive->name);
+
/*
* Conservative "downgrade" for all pre-ATA2 drives
*/
- if (pio_mode && pio_mode < 4) {
+ if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_DOWNGRADE) == 0 &&
+ pio_mode && pio_mode < 4) {
pio_mode--;
- overridden = 1;
- if (cycle_time && cycle_time < ide_pio_timings[pio_mode].cycle_time)
- cycle_time = 0; /* use standard timing */
+ printk(KERN_INFO "%s: applying conservative "
+ "PIO \"downgrade\"\n", drive->name);
}
}
- if (pio_mode > max_mode) {
+
+ if (pio_mode > max_mode)
pio_mode = max_mode;
- cycle_time = 0;
- }
- if (d) {
- d->pio_mode = pio_mode;
- d->cycle_time = cycle_time ? cycle_time : ide_pio_timings[pio_mode].cycle_time;
- d->use_iordy = use_iordy;
- d->overridden = overridden;
- }
+
return pio_mode;
}
diff --git a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h
index e6cb859..daffbb9 100644
--- a/drivers/ide/ide-timing.h
+++ b/drivers/ide/ide-timing.h
@@ -106,23 +106,6 @@ static struct ide_timing ide_timing[] = {
#define XFER_EPIO 0x01
#define XFER_PIO 0x00
-static short ide_find_best_pio_mode(ide_drive_t *drive)
-{
- struct hd_driveid *id = drive->id;
- short best = 0;
-
- if (id->field_valid & 2) { /* EIDE PIO modes */
-
- if ((best = (drive->id->eide_pio_modes & 4) ? XFER_PIO_5 :
- (drive->id->eide_pio_modes & 2) ? XFER_PIO_4 :
- (drive->id->eide_pio_modes & 1) ? XFER_PIO_3 : 0)) return best;
- }
-
- return (drive->id->tPIO == 2) ? XFER_PIO_2 :
- (drive->id->tPIO == 1) ? XFER_PIO_1 :
- (drive->id->tPIO == 0) ? XFER_PIO_0 : XFER_PIO_SLOW;
-}
-
static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, int T, int UT)
{
q->setup = EZ(t->setup * 1000, T);
@@ -212,7 +195,8 @@ static int ide_timing_compute(ide_drive_t *drive, short speed, struct ide_timing
*/
if ((speed & XFER_MODE) != XFER_PIO) {
- ide_timing_compute(drive, ide_find_best_pio_mode(drive), &p, T, UT);
+ u8 pio = ide_get_best_pio_mode(drive, 255, 5);
+ ide_timing_compute(drive, XFER_PIO_0 + pio, &p, T, UT);
ide_timing_merge(&p, t, t, IDE_TIMING_ALL);
}
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 077fb67..5e88a06 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -16,10 +16,6 @@
* (usually 14 & 15).
* There can be up to two drives per interface, as per the ATA-2 spec.
*
- * Primary: ide0, port 0x1f0; major=3; hda is minor=0; hdb is minor=64
- * Secondary: ide1, port 0x170; major=22; hdc is minor=0; hdd is minor=64
- * Tertiary: ide2, port 0x???; major=33; hde is minor=0; hdf is minor=64
- * Quaternary: ide3, port 0x???; major=34; hdg is minor=0; hdh is minor=64
* ...
*
* From hd.c:
@@ -47,80 +43,6 @@
* This was a rewrite of just about everything from hd.c, though some original
* code is still sprinkled about. Think of it as a major evolution, with
* inspiration from lots of linux users, esp. hamish@xxxxxxxxxxxxxxxx
- *
- * Version 1.0 ALPHA initial code, primary i/f working okay
- * Version 1.3 BETA dual i/f on shared irq tested & working!
- * Version 1.4 BETA added auto probing for irq(s)
- * Version 1.5 BETA added ALPHA (untested) support for IDE cd-roms,
- * ...
- * Version 5.50 allow values as small as 20 for idebus=
- * Version 5.51 force non io_32bit in drive_cmd_intr()
- * change delay_10ms() to delay_50ms() to fix problems
- * Version 5.52 fix incorrect invalidation of removable devices
- * add "hdx=slow" command line option
- * Version 5.60 start to modularize the driver; the disk and ATAPI
- * drivers can be compiled as loadable modules.
- * move IDE probe code to ide-probe.c
- * move IDE disk code to ide-disk.c
- * add support for generic IDE device subdrivers
- * add m68k code from Geert Uytterhoeven
- * probe all interfaces by default
- * add ioctl to (re)probe an interface
- * Version 6.00 use per device request queues
- * attempt to optimize shared hwgroup performance
- * add ioctl to manually adjust bandwidth algorithms
- * add kerneld support for the probe module
- * fix bug in ide_error()
- * fix bug in the first ide_get_lock() call for Atari
- * don't flush leftover data for ATAPI devices
- * Version 6.01 clear hwgroup->active while the hwgroup sleeps
- * support HDIO_GETGEO for floppies
- * Version 6.02 fix ide_ack_intr() call
- * check partition table on floppies
- * Version 6.03 handle bad status bit sequencing in ide_wait_stat()
- * Version 6.10 deleted old entries from this list of updates
- * replaced triton.c with ide-dma.c generic PCI DMA
- * added support for BIOS-enabled UltraDMA
- * rename all "promise" things to "pdc4030"
- * fix EZ-DRIVE handling on small disks
- * Version 6.11 fix probe error in ide_scan_devices()
- * fix ancient "jiffies" polling bugs
- * mask all hwgroup interrupts on each irq entry
- * Version 6.12 integrate ioctl and proc interfaces
- * fix parsing of "idex=" command line parameter
- * Version 6.13 add support for ide4/ide5 courtesy rjones@xxxxxxxxxxxxxxx
- * Version 6.14 fixed IRQ sharing among PCI devices
- * Version 6.15 added SMP awareness to IDE drivers
- * Version 6.16 fixed various bugs; even more SMP friendly
- * Version 6.17 fix for newest EZ-Drive problem
- * Version 6.18 default unpartitioned-disk translation now "BIOS LBA"
- * Version 6.19 Re-design for a UNIFORM driver for all platforms,
- * model based on suggestions from Russell King and
- * Geert Uytterhoeven
- * Promise DC4030VL now supported.
- * add support for ide6/ide7
- * delay_50ms() changed to ide_delay_50ms() and exported.
- * Version 6.20 Added/Fixed Generic ATA-66 support and hwif detection.
- * Added hdx=flash to allow for second flash disk
- * detection w/o the hang loop.
- * Added support for ide8/ide9
- * Added idex=ata66 for the quirky chipsets that are
- * ATA-66 compliant, but have yet to determine a method
- * of verification of the 80c cable presence.
- * Specifically Promise's PDC20262 chipset.
- * Version 6.21 Fixing/Fixed SMP spinlock issue with insight from an old
- * hat that clarified original low level driver design.
- * Version 6.30 Added SMP support; fixed multmode issues. -ml
- * Version 6.31 Debug Share INTR's and request queue streaming
- * Native ATA-100 support
- * Prep for Cascades Project
- * Version 7.00alpha First named revision of ide rearrange
- *
- * Some additional driver compile-time options are in ./include/linux/ide.h
- *
- * To do, in likely order of completion:
- * - modify kernel to obtain BIOS geometry for drives on 2nd/3rd/4th i/f
- *
*/
#define REVISION "Revision: 7.00alpha2"
@@ -455,6 +377,10 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
hwif->straight8 = tmp_hwif->straight8;
hwif->bus_state = tmp_hwif->bus_state;
+ hwif->host_flags = tmp_hwif->host_flags;
+
+ hwif->pio_mask = tmp_hwif->pio_mask;
+
hwif->atapi_dma = tmp_hwif->atapi_dma;
hwif->ultra_mask = tmp_hwif->ultra_mask;
hwif->mwdma_mask = tmp_hwif->mwdma_mask;
@@ -1171,10 +1097,6 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device
return 0;
}
- case CDROMEJECT:
- case CDROMCLOSETRAY:
- return scsi_cmd_ioctl(file, bdev->bd_disk->queue, bdev->bd_disk, cmd, p);
-
case HDIO_GET_BUSSTATE:
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c
index df17ed6..9b9c476 100644
--- a/drivers/ide/legacy/ali14xx.c
+++ b/drivers/ide/legacy/ali14xx.c
@@ -115,13 +115,12 @@ static void ali14xx_tune_drive (ide_drive_t *drive, u8 pio)
int time1, time2;
u8 param1, param2, param3, param4;
unsigned long flags;
- ide_pio_data_t d;
int bus_speed = system_bus_clock();
- pio = ide_get_best_pio_mode(drive, pio, ALI_MAX_PIO, &d);
+ pio = ide_get_best_pio_mode(drive, pio, ALI_MAX_PIO);
/* calculate timing, according to PIO mode */
- time1 = d.cycle_time;
+ time1 = ide_pio_cycle_time(drive, pio);
time2 = ide_pio_timings[pio].active_time;
param3 = param1 = (time2 * bus_speed + 999) / 1000;
param4 = param2 = (time1 * bus_speed + 999) / 1000 - param1;
@@ -212,10 +211,12 @@ static int __init ali14xx_probe(void)
mate = &ide_hwifs[1];
hwif->chipset = ide_ali14xx;
+ hwif->pio_mask = ATA_PIO4;
hwif->tuneproc = &ali14xx_tune_drive;
hwif->mate = mate;
mate->chipset = ide_ali14xx;
+ mate->pio_mask = ATA_PIO4;
mate->tuneproc = &ali14xx_tune_drive;
mate->mate = hwif;
mate->channel = 1;
diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/legacy/dtc2278.c
index 36a3f0a..6c01d95 100644
--- a/drivers/ide/legacy/dtc2278.c
+++ b/drivers/ide/legacy/dtc2278.c
@@ -71,7 +71,7 @@ static void tune_dtc2278 (ide_drive_t *drive, u8 pio)
{
unsigned long flags;
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
if (pio >= 3) {
spin_lock_irqsave(&ide_lock, flags);
@@ -123,6 +123,7 @@ static int __init dtc2278_probe(void)
hwif->serialized = 1;
hwif->chipset = ide_dtc2278;
+ hwif->pio_mask = ATA_PIO4;
hwif->tuneproc = &tune_dtc2278;
hwif->drives[0].no_unmask = 1;
hwif->drives[1].no_unmask = 1;
diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c
index c8f353b..bfaa202 100644
--- a/drivers/ide/legacy/ht6560b.c
+++ b/drivers/ide/legacy/ht6560b.c
@@ -203,19 +203,21 @@ static u8 ht_pio2timings(ide_drive_t *drive, u8 pio)
{
int active_time, recovery_time;
int active_cycles, recovery_cycles;
- ide_pio_data_t d;
int bus_speed = system_bus_clock();
if (pio) {
- pio = ide_get_best_pio_mode(drive, pio, 5, &d);
-
+ unsigned int cycle_time;
+
+ pio = ide_get_best_pio_mode(drive, pio, 5);
+ cycle_time = ide_pio_cycle_time(drive, pio);
+
/*
* Just like opti621.c we try to calculate the
* actual cycle time for recovery and activity
* according system bus speed.
*/
active_time = ide_pio_timings[pio].active_time;
- recovery_time = d.cycle_time
+ recovery_time = cycle_time
- active_time
- ide_pio_timings[pio].setup_time;
/*
@@ -331,12 +333,14 @@ int __init ht6560b_init(void)
hwif->chipset = ide_ht6560b;
hwif->selectproc = &ht6560b_selectproc;
+ hwif->pio_mask = ATA_PIO5;
hwif->tuneproc = &tune_ht6560b;
hwif->serialized = 1; /* is this needed? */
hwif->mate = mate;
mate->chipset = ide_ht6560b;
mate->selectproc = &ht6560b_selectproc;
+ mate->pio_mask = ATA_PIO5;
mate->tuneproc = &tune_ht6560b;
mate->serialized = 1; /* is this needed? */
mate->mate = hwif;
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index 2f3977f..4cdb519 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -386,6 +386,7 @@ static struct pcmcia_device_id ide_ids[] = {
PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
+ PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c
index 7783745..8b87a42 100644
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -252,38 +252,38 @@ static void qd6500_tune_drive (ide_drive_t *drive, u8 pio)
static void qd6580_tune_drive (ide_drive_t *drive, u8 pio)
{
- ide_pio_data_t d;
int base = HWIF(drive)->select_data;
+ unsigned int cycle_time;
int active_time = 175;
int recovery_time = 415; /* worst case values from the dos driver */
if (drive->id && !qd_find_disk_type(drive, &active_time, &recovery_time)) {
- pio = ide_get_best_pio_mode(drive, pio, 4, &d);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
+ cycle_time = ide_pio_cycle_time(drive, pio);
switch (pio) {
case 0: break;
case 3:
- if (d.cycle_time >= 110) {
+ if (cycle_time >= 110) {
active_time = 86;
- recovery_time = d.cycle_time - 102;
+ recovery_time = cycle_time - 102;
} else
printk(KERN_WARNING "%s: Strange recovery time !\n",drive->name);
break;
case 4:
- if (d.cycle_time >= 69) {
+ if (cycle_time >= 69) {
active_time = 70;
- recovery_time = d.cycle_time - 61;
+ recovery_time = cycle_time - 61;
} else
printk(KERN_WARNING "%s: Strange recovery time !\n",drive->name);
break;
default:
- if (d.cycle_time >= 180) {
+ if (cycle_time >= 180) {
active_time = 110;
- recovery_time = d.cycle_time - 120;
+ recovery_time = cycle_time - 120;
} else {
active_time = ide_pio_timings[pio].active_time;
- recovery_time = d.cycle_time
- -active_time;
+ recovery_time = cycle_time - active_time;
}
}
printk(KERN_INFO "%s: PIO mode%d\n", drive->name,pio);
@@ -346,6 +346,7 @@ static void __init qd_setup(ide_hwif_t *hwif, int base, int config,
hwif->drives[1].drive_data = data1;
hwif->drives[0].io_32bit =
hwif->drives[1].io_32bit = 1;
+ hwif->pio_mask = ATA_PIO4;
hwif->tuneproc = tuneproc;
probe_hwif_init(hwif);
}
diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/legacy/umc8672.c
index ddc403a..d2862e6 100644
--- a/drivers/ide/legacy/umc8672.c
+++ b/drivers/ide/legacy/umc8672.c
@@ -110,7 +110,7 @@ static void tune_umc (ide_drive_t *drive, u8 pio)
unsigned long flags;
ide_hwgroup_t *hwgroup = ide_hwifs[HWIF(drive)->index^1].hwgroup;
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
printk("%s: setting umc8672 to PIO mode%d (speed %d)\n",
drive->name, pio, pio_to_umc[pio]);
spin_lock_irqsave(&ide_lock, flags);
@@ -149,10 +149,12 @@ static int __init umc8672_probe(void)
mate = &ide_hwifs[1];
hwif->chipset = ide_umc8672;
+ hwif->pio_mask = ATA_PIO4;
hwif->tuneproc = &tune_umc;
hwif->mate = mate;
mate->chipset = ide_umc8672;
+ mate->pio_mask = ATA_PIO4;
mate->tuneproc = &tune_umc;
mate->mate = hwif;
mate->channel = 1;
diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c
index 2e7013a..2ba6a05 100644
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -106,7 +106,7 @@ static void auide_tune_drive(ide_drive_t *drive, byte pio)
u8 speed;
/* get the best pio mode for the drive */
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
printk(KERN_INFO "%s: setting Au1XXX IDE to PIO mode%d\n",
drive->name, pio);
@@ -692,6 +692,8 @@ static int au_ide_probe(struct device *dev)
hwif->swdma_mask = 0x0;
#endif
+ hwif->pio_mask = ATA_PIO4;
+
hwif->noprobe = 0;
hwif->drives[0].unmask = 1;
hwif->drives[1].unmask = 1;
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index e5d0936..7443283 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -142,7 +142,7 @@ static int aec6260_tune_chipset (ide_drive_t *drive, u8 xferspeed)
static void aec62xx_tune_drive (ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
(void) HWIF(drive)->speedproc(drive, pio + XFER_PIO_0);
}
@@ -174,12 +174,6 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch
{
int bus_speed = system_bus_clock();
- if (dev->resource[PCI_ROM_RESOURCE].start) {
- pci_write_config_dword(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
- printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name,
- (unsigned long)dev->resource[PCI_ROM_RESOURCE].start);
- }
-
if (bus_speed <= 33)
pci_set_drvdata(dev, (void *) aec6xxx_33_base);
else
@@ -271,48 +265,48 @@ static ide_pci_device_t aec62xx_chipsets[] __devinitdata = {
.init_setup = init_setup_aec62xx,
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.bootable = OFF_BOARD,
+ .pio_mask = ATA_PIO4,
.udma_mask = 0x07, /* udma0-2 */
},{ /* 1 */
.name = "AEC6260",
.init_setup = init_setup_aec62xx,
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
- .channels = 2,
.autodma = NOAUTODMA,
.bootable = OFF_BOARD,
+ .pio_mask = ATA_PIO4,
.udma_mask = 0x1f, /* udma0-4 */
},{ /* 2 */
.name = "AEC6260R",
.init_setup = init_setup_aec62xx,
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.bootable = NEVER_BOARD,
+ .pio_mask = ATA_PIO4,
.udma_mask = 0x1f, /* udma0-4 */
},{ /* 3 */
.name = "AEC6280",
.init_setup = init_setup_aec6x80,
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
- .channels = 2,
.autodma = AUTODMA,
.bootable = OFF_BOARD,
+ .pio_mask = ATA_PIO4,
.udma_mask = 0x3f, /* udma0-5 */
},{ /* 4 */
.name = "AEC6280R",
.init_setup = init_setup_aec6x80,
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.bootable = OFF_BOARD,
+ .pio_mask = ATA_PIO4,
.udma_mask = 0x3f, /* udma0-5 */
}
};
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index ba0fb92..5511c86 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -295,7 +295,6 @@ static int ali_get_info (char *buffer, char **addr, off_t offset, int count)
static u8 ali15x3_tune_pio (ide_drive_t *drive, u8 pio)
{
- ide_pio_data_t d;
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
int s_time, a_time, c_time;
@@ -307,7 +306,7 @@ static u8 ali15x3_tune_pio (ide_drive_t *drive, u8 pio)
u8 cd_dma_fifo = 0;
int unit = drive->select.b.unit & 1;
- pio = ide_get_best_pio_mode(drive, pio, 5, &d);
+ pio = ide_get_best_pio_mode(drive, pio, 5);
s_time = ide_pio_timings[pio].setup_time;
a_time = ide_pio_timings[pio].active_time;
if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8)
@@ -817,9 +816,9 @@ static ide_pci_device_t ali15x3_chipset __devinitdata = {
.init_chipset = init_chipset_ali15x3,
.init_hwif = init_hwif_ali15x3,
.init_dma = init_dma_ali15x3,
- .channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
+ .pio_mask = ATA_PIO5,
};
/**
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 8d30b99..06c15a6 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -1,5 +1,5 @@
/*
- * Version 2.20
+ * Version 2.21
*
* AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04
* IDE driver for Linux.
@@ -272,10 +272,8 @@ static int amd_set_drive(ide_drive_t *drive, u8 speed)
static void amd74xx_tune_drive(ide_drive_t *drive, u8 pio)
{
- if (pio == 255) {
- amd_set_drive(drive, ide_find_best_pio_mode(drive));
- return;
- }
+ if (pio == 255)
+ pio = ide_get_best_pio_mode(drive, 255, 5);
amd_set_drive(drive, XFER_PIO_0 + min_t(byte, pio, 5));
}
@@ -284,12 +282,14 @@ static int amd74xx_ide_dma_check(ide_drive_t *drive)
{
u8 speed = ide_max_dma_mode(drive);
- if (speed == 0)
- speed = ide_find_best_pio_mode(drive);
+ if (speed == 0) {
+ amd74xx_tune_drive(drive, 255);
+ return -1;
+ }
amd_set_drive(drive, speed);
- if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
+ if (drive->autodma)
return 0;
return -1;
@@ -448,10 +448,12 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
.name = name_str, \
.init_chipset = init_chipset_amd74xx, \
.init_hwif = init_hwif_amd74xx, \
- .channels = 2, \
.autodma = AUTODMA, \
.enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \
.bootable = ON_BOARD, \
+ .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST \
+ | IDE_HFLAG_PIO_NO_DOWNGRADE, \
+ .pio_mask = ATA_PIO5, \
}
#define DECLARE_NV_DEV(name_str) \
@@ -459,10 +461,12 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
.name = name_str, \
.init_chipset = init_chipset_amd74xx, \
.init_hwif = init_hwif_amd74xx, \
- .channels = 2, \
.autodma = AUTODMA, \
.enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \
.bootable = ON_BOARD, \
+ .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST \
+ | IDE_HFLAG_PIO_NO_DOWNGRADE, \
+ .pio_mask = ATA_PIO5, \
}
static ide_pci_device_t amd74xx_chipsets[] __devinitdata = {
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
index 2761510..1725aa4 100644
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -1,9 +1,8 @@
/*
- * linux/drivers/ide/pci/atiixp.c Version 0.01-bart2 Feb. 26, 2004
+ * linux/drivers/ide/pci/atiixp.c Version 0.02 Jun 16 2007
*
* Copyright (C) 2003 ATI Inc. <hyu@xxxxxxx>
- * Copyright (C) 2004 Bartlomiej Zolnierkiewicz
- *
+ * Copyright (C) 2004,2007 Bartlomiej Zolnierkiewicz
*/
#include <linux/types.h>
@@ -123,14 +122,14 @@ static void atiixp_dma_host_off(ide_drive_t *drive)
}
/**
- * atiixp_tune_drive - tune a drive attached to a ATIIXP
+ * atiixp_tune_pio - tune a drive attached to a ATIIXP
* @drive: drive to tune
* @pio: desired PIO mode
*
* Set the interface PIO mode.
*/
-static void atiixp_tuneproc(ide_drive_t *drive, u8 pio)
+static void atiixp_tune_pio(ide_drive_t *drive, u8 pio)
{
struct pci_dev *dev = drive->hwif->pci_dev;
unsigned long flags;
@@ -154,6 +153,13 @@ static void atiixp_tuneproc(ide_drive_t *drive, u8 pio)
spin_unlock_irqrestore(&atiixp_lock, flags);
}
+static void atiixp_tuneproc(ide_drive_t *drive, u8 pio)
+{
+ pio = ide_get_best_pio_mode(drive, pio, 4);
+ atiixp_tune_pio(drive, pio);
+ (void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
+}
+
/**
* atiixp_tune_chipset - tune a ATIIXP interface
* @drive: IDE drive to tune
@@ -175,6 +181,11 @@ static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed)
speed = ide_rate_filter(drive, xferspeed);
+ if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
+ atiixp_tune_pio(drive, speed - XFER_PIO_0);
+ return ide_config_drive_speed(drive, speed);
+ }
+
spin_lock_irqsave(&atiixp_lock, flags);
save_mdma_mode[drive->dn] = 0;
@@ -201,7 +212,7 @@ static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed)
else
pio = speed - XFER_PIO_0;
- atiixp_tuneproc(drive, pio);
+ atiixp_tune_pio(drive, pio);
return ide_config_drive_speed(drive, speed);
}
@@ -216,18 +227,13 @@ static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed)
static int atiixp_dma_check(ide_drive_t *drive)
{
- u8 tspeed, speed;
-
drive->init_speed = 0;
if (ide_tune_dma(drive))
return 0;
- if (ide_use_fast_pio(drive)) {
- tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL);
- speed = atiixp_dma_2_pio(XFER_PIO_0 + tspeed) + XFER_PIO_0;
- atiixp_speedproc(drive, speed);
- }
+ if (ide_use_fast_pio(drive))
+ atiixp_tuneproc(drive, 255);
return -1;
}
@@ -285,17 +291,18 @@ static ide_pci_device_t atiixp_pci_info[] __devinitdata = {
{ /* 0 */
.name = "ATIIXP",
.init_hwif = init_hwif_atiixp,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
.bootable = ON_BOARD,
+ .pio_mask = ATA_PIO4,
},{ /* 1 */
.name = "SB600_PATA",
.init_hwif = init_hwif_atiixp,
- .channels = 1,
.autodma = AUTODMA,
.enablebits = {{0x48,0x01,0x00}, {0x00,0x00,0x00}},
.bootable = ON_BOARD,
+ .host_flags = IDE_HFLAG_SINGLE,
+ .pio_mask = ATA_PIO4,
},
};
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index dc43f00..9689494 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -633,9 +633,8 @@ static void cmd640_set_mode (unsigned int index, u8 pio_mode, unsigned int cycle
*/
static void cmd640_tune_drive (ide_drive_t *drive, u8 mode_wanted)
{
+ unsigned int index = 0, cycle_time;
u8 b;
- ide_pio_data_t d;
- unsigned int index = 0;
while (drive != cmd_drives[index]) {
if (++index > 3) {
@@ -662,16 +661,14 @@ static void cmd640_tune_drive (ide_drive_t *drive, u8 mode_wanted)
return;
}
- (void) ide_get_best_pio_mode (drive, mode_wanted, 5, &d);
- cmd640_set_mode (index, d.pio_mode, d.cycle_time);
+ mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 5);
+ cycle_time = ide_pio_cycle_time(drive, mode_wanted);
+ cmd640_set_mode(index, mode_wanted, cycle_time);
+
+ printk("%s: selected cmd640 PIO mode%d (%dns)",
+ drive->name, mode_wanted, cycle_time);
- printk ("%s: selected cmd640 PIO mode%d (%dns)%s",
- drive->name,
- d.pio_mode,
- d.cycle_time,
- d.overridden ? " (overriding vendor mode)" : "");
display_clocks(index);
- return;
}
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
@@ -769,6 +766,7 @@ int __init ide_probe_for_cmd640x (void)
cmd_hwif0->name, 'a' + cmd640_chip_version - 1, bus_type, cfr);
cmd_hwif0->chipset = ide_cmd640;
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
+ cmd_hwif0->pio_mask = ATA_PIO5;
cmd_hwif0->tuneproc = &cmd640_tune_drive;
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
@@ -824,6 +822,7 @@ int __init ide_probe_for_cmd640x (void)
cmd_hwif1->mate = cmd_hwif0;
cmd_hwif1->channel = 1;
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
+ cmd_hwif1->pio_mask = ATA_PIO5;
cmd_hwif1->tuneproc = &cmd640_tune_drive;
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
}
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 1e89dd6..19633c5 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -221,17 +221,18 @@ static u8 cmd64x_tune_pio (ide_drive_t *drive, u8 mode_wanted)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
- ide_pio_data_t pio;
+ unsigned int cycle_time;
u8 pio_mode, setup_count, arttim = 0;
static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
- pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5, &pio);
- cmdprintk("%s: PIO mode wanted %d, selected %d (%d ns)%s\n",
- drive->name, mode_wanted, pio_mode, pio.cycle_time,
- pio.overridden ? " (overriding vendor mode)" : "");
+ pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5);
+ cycle_time = ide_pio_cycle_time(drive, pio_mode);
- program_cycle_times(drive, pio.cycle_time,
+ cmdprintk("%s: PIO mode wanted %d, selected %d (%d ns)\n",
+ drive->name, mode_wanted, pio_mode, cycle_time);
+
+ program_cycle_times(drive, cycle_time,
ide_pio_timings[pio_mode].active_time);
setup_count = quantize_timing(ide_pio_timings[pio_mode].setup_time,
@@ -618,40 +619,40 @@ static ide_pci_device_t cmd64x_chipsets[] __devinitdata = {
.init_setup = init_setup_cmd64x,
.init_chipset = init_chipset_cmd64x,
.init_hwif = init_hwif_cmd64x,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}},
.bootable = ON_BOARD,
+ .pio_mask = ATA_PIO5,
.udma_mask = 0x00, /* no udma */
},{ /* 1 */
.name = "CMD646",
.init_setup = init_setup_cmd646,
.init_chipset = init_chipset_cmd64x,
.init_hwif = init_hwif_cmd64x,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.bootable = ON_BOARD,
+ .pio_mask = ATA_PIO5,
.udma_mask = 0x07, /* udma0-2 */
},{ /* 2 */
.name = "CMD648",
.init_setup = init_setup_cmd64x,
.init_chipset = init_chipset_cmd64x,
.init_hwif = init_hwif_cmd64x,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.bootable = ON_BOARD,
+ .pio_mask = ATA_PIO5,
.udma_mask = 0x1f, /* udma0-4 */
},{ /* 3 */
.name = "CMD649",
.init_setup = init_setup_cmd64x,
.init_chipset = init_chipset_cmd64x,
.init_hwif = init_hwif_cmd64x,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.bootable = ON_BOARD,
+ .pio_mask = ATA_PIO5,
.udma_mask = 0x3f, /* udma0-5 */
}
};
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index 3b88a3a..bccedf9 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -126,7 +126,7 @@ static int cs5520_tune_chipset(ide_drive_t *drive, u8 xferspeed)
static void cs5520_tune_drive(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
cs5520_tune_chipset(drive, (XFER_PIO_0 + pio));
}
@@ -194,10 +194,10 @@ static void __devinit init_hwif_cs5520(ide_hwif_t *hwif)
.name = name_str, \
.init_setup_dma = cs5520_init_setup_dma, \
.init_hwif = init_hwif_cs5520, \
- .channels = 2, \
.autodma = AUTODMA, \
.bootable = ON_BOARD, \
- .flags = IDEPCI_FLAG_ISA_PORTS, \
+ .host_flags = IDE_HFLAG_ISA_PORTS, \
+ .pio_mask = ATA_PIO4, \
}
static ide_pci_device_t cyrix_chipsets[] __devinitdata = {
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index b5c00d1..acaf71f 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -82,7 +82,7 @@ static void cs5530_tunepio(ide_drive_t *drive, u8 pio)
static void cs5530_tuneproc (ide_drive_t *drive, u8 pio) /* pio=255 means "autotune" */
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
if (cs5530_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
cs5530_tunepio(drive, pio);
@@ -341,9 +341,9 @@ static ide_pci_device_t cs5530_chipset __devinitdata = {
.name = "CS5530",
.init_chipset = init_chipset_cs5530,
.init_hwif = init_hwif_cs5530,
- .channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
+ .pio_mask = ATA_PIO4,
};
static int __devinit cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
index 10f61f3..ce44e38 100644
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -89,7 +89,7 @@ static void cs5535_set_speed(ide_drive_t *drive, u8 speed)
pioa = speed - XFER_PIO_0;
piob = ide_get_best_pio_mode(&(drive->hwif->drives[!unit]),
- 255, 4, NULL);
+ 255, 4);
cmd = pioa < piob ? pioa : piob;
/* Write the speed of the current drive */
@@ -159,7 +159,7 @@ static void cs5535_tuneproc(ide_drive_t *drive, u8 xferspeed)
/* cs5535 max pio is pio 4, best_pio will check the blacklist.
i think we don't need to rate_filter the incoming xferspeed
since we know we're only going to choose pio */
- xferspeed = ide_get_best_pio_mode(drive, xferspeed, 4, NULL);
+ xferspeed = ide_get_best_pio_mode(drive, xferspeed, 4);
ide_config_drive_speed(drive, modes[xferspeed]);
cs5535_set_speed(drive, xferspeed);
}
@@ -174,7 +174,7 @@ static int cs5535_dma_check(ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive)) {
- speed = ide_get_best_pio_mode(drive, 255, 4, NULL);
+ speed = ide_get_best_pio_mode(drive, 255, 4);
cs5535_set_drive(drive, speed);
}
@@ -228,9 +228,10 @@ static void __devinit init_hwif_cs5535(ide_hwif_t *hwif)
static ide_pci_device_t cs5535_chipset __devinitdata = {
.name = "CS5535",
.init_hwif = init_hwif_cs5535,
- .channels = 1,
.autodma = AUTODMA,
.bootable = ON_BOARD,
+ .host_flags = IDE_HFLAG_SINGLE,
+ .pio_mask = ATA_PIO4,
};
static int __devinit cs5535_init_one(struct pci_dev *dev,
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index 103b9db..daa36fc 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -330,7 +330,7 @@ static void cy82c693_tune_drive (ide_drive_t *drive, u8 pio)
#endif /* CY82C693_DEBUG_LOGS */
/* first let's calc the pio modes */
- pio = ide_get_best_pio_mode(drive, pio, CY82C693_MAX_PIO, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, CY82C693_MAX_PIO);
#if CY82C693_DEBUG_INFO
printk (KERN_INFO "%s: Selected PIO mode %d\n", drive->name, pio);
@@ -483,9 +483,10 @@ static ide_pci_device_t cy82c693_chipset __devinitdata = {
.init_chipset = init_chipset_cy82c693,
.init_iops = init_iops_cy82c693,
.init_hwif = init_hwif_cy82c693,
- .channels = 1,
.autodma = AUTODMA,
.bootable = ON_BOARD,
+ .host_flags = IDE_HFLAG_SINGLE,
+ .pio_mask = ATA_PIO4,
};
static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index 0d51a11..48caa46 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -95,92 +95,77 @@ static ide_pci_device_t generic_chipsets[] __devinitdata = {
{ /* 0 */
.name = "Unknown",
.init_hwif = init_hwif_generic,
- .channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
},{ /* 1 */
.name = "NS87410",
.init_hwif = init_hwif_generic,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x43,0x08,0x08}, {0x47,0x08,0x08}},
.bootable = ON_BOARD,
},{ /* 2 */
.name = "SAMURAI",
.init_hwif = init_hwif_generic,
- .channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
},{ /* 3 */
.name = "HT6565",
.init_hwif = init_hwif_generic,
- .channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
},{ /* 4 */
.name = "UM8673F",
.init_hwif = init_hwif_generic,
- .channels = 2,
.autodma = NODMA,
.bootable = ON_BOARD,
},{ /* 5 */
.name = "UM8886A",
.init_hwif = init_hwif_generic,
- .channels = 2,
.autodma = NODMA,
.bootable = ON_BOARD,
},{ /* 6 */
.name = "UM8886BF",
.init_hwif = init_hwif_generic,
- .channels = 2,
.autodma = NODMA,
.bootable = ON_BOARD,
},{ /* 7 */
.name = "HINT_IDE",
.init_hwif = init_hwif_generic,
- .channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
},{ /* 8 */
.name = "VIA_IDE",
.init_hwif = init_hwif_generic,
- .channels = 2,
.autodma = NOAUTODMA,
.bootable = ON_BOARD,
},{ /* 9 */
.name = "OPTI621V",
.init_hwif = init_hwif_generic,
- .channels = 2,
.autodma = NOAUTODMA,
.bootable = ON_BOARD,
},{ /* 10 */
.name = "VIA8237SATA",
.init_hwif = init_hwif_generic,
- .channels = 2,
.autodma = AUTODMA,
.bootable = OFF_BOARD,
},{ /* 11 */
.name = "Piccolo0102",
.init_hwif = init_hwif_generic,
- .channels = 2,
.autodma = NOAUTODMA,
.bootable = ON_BOARD,
},{ /* 12 */
.name = "Piccolo0103",
.init_hwif = init_hwif_generic,
- .channels = 2,
.autodma = NOAUTODMA,
.bootable = ON_BOARD,
},{ /* 13 */
.name = "Piccolo0105",
.init_hwif = init_hwif_generic,
- .channels = 2,
.autodma = NOAUTODMA,
.bootable = ON_BOARD,
},{ /* 14 */
.name = "Revolution",
.init_hwif = init_hwif_generic,
- .channels = 2,
.autodma = AUTODMA,
.bootable = OFF_BOARD,
}
diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c
index 2c24c3d..19778c5 100644
--- a/drivers/ide/pci/hpt34x.c
+++ b/drivers/ide/pci/hpt34x.c
@@ -80,7 +80,7 @@ static int hpt34x_tune_chipset (ide_drive_t *drive, u8 xferspeed)
static void hpt34x_tune_drive (ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 5);
(void) hpt34x_tune_chipset(drive, (XFER_PIO_0 + pio));
}
@@ -120,17 +120,10 @@ static unsigned int __devinit init_chipset_hpt34x(struct pci_dev *dev, const cha
pci_write_config_byte(dev, HPT34X_PCI_INIT_REG, 0x00);
pci_read_config_word(dev, PCI_COMMAND, &cmd);
- if (cmd & PCI_COMMAND_MEMORY) {
- if (pci_resource_start(dev, PCI_ROM_RESOURCE)) {
- pci_write_config_dword(dev, PCI_ROM_ADDRESS,
- dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
- printk(KERN_INFO "HPT345: ROM enabled at 0x%08lx\n",
- (unsigned long)dev->resource[PCI_ROM_RESOURCE].start);
- }
+ if (cmd & PCI_COMMAND_MEMORY)
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xF0);
- } else {
+ else
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
- }
/*
* Since 20-23 can be assigned and are R/W, we correct them.
@@ -182,10 +175,10 @@ static ide_pci_device_t hpt34x_chipset __devinitdata = {
.name = "HPT34X",
.init_chipset = init_chipset_hpt34x,
.init_hwif = init_hwif_hpt34x,
- .channels = 2,
.autodma = NOAUTODMA,
.bootable = NEVER_BOARD,
- .extra = 16
+ .extra = 16,
+ .pio_mask = ATA_PIO5,
};
static int __devinit hpt34x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index e9b07a9..2cd74c3 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -652,7 +652,7 @@ static int hpt3xx_tune_chipset(ide_drive_t *drive, u8 speed)
static void hpt3xx_tune_drive(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
(void) hpt3xx_tune_chipset (drive, XFER_PIO_0 + pio);
}
@@ -994,14 +994,6 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
*/
*info = *(struct hpt_info *)pci_get_drvdata(dev);
- /*
- * FIXME: Not portable. Also, why do we enable the ROM in the first place?
- * We don't seem to be using it.
- */
- if (dev->resource[PCI_ROM_RESOURCE].start)
- pci_write_config_dword(dev, PCI_ROM_ADDRESS,
- dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
-
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4));
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78);
pci_write_config_byte(dev, PCI_MIN_GNT, 0x08);
@@ -1491,7 +1483,7 @@ static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
* to both functions -- really stupid design decision... :-(
* Bit 4 is for the primary channel, bit 5 for the secondary.
*/
- d->channels = 1;
+ d->host_flags |= IDE_HFLAG_SINGLE;
d->enablebits[0].mask = d->enablebits[0].val = 0x10;
d->udma_mask = HPT366_ALLOW_ATA66_3 ?
@@ -1554,71 +1546,71 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = {
.init_chipset = init_chipset_hpt366,
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.bootable = OFF_BOARD,
- .extra = 240
+ .extra = 240,
+ .pio_mask = ATA_PIO4,
},{ /* 1 */
.name = "HPT372A",
.init_setup = init_setup_hpt372a,
.init_chipset = init_chipset_hpt366,
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.udma_mask = HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f,
.bootable = OFF_BOARD,
- .extra = 240
+ .extra = 240,
+ .pio_mask = ATA_PIO4,
},{ /* 2 */
.name = "HPT302",
.init_setup = init_setup_hpt302,
.init_chipset = init_chipset_hpt366,
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.udma_mask = HPT302_ALLOW_ATA133_6 ? 0x7f : 0x3f,
.bootable = OFF_BOARD,
- .extra = 240
+ .extra = 240,
+ .pio_mask = ATA_PIO4,
},{ /* 3 */
.name = "HPT371",
.init_setup = init_setup_hpt371,
.init_chipset = init_chipset_hpt366,
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.udma_mask = HPT371_ALLOW_ATA133_6 ? 0x7f : 0x3f,
.bootable = OFF_BOARD,
- .extra = 240
+ .extra = 240,
+ .pio_mask = ATA_PIO4,
},{ /* 4 */
.name = "HPT374",
.init_setup = init_setup_hpt374,
.init_chipset = init_chipset_hpt366,
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
- .channels = 2, /* 4 */
.autodma = AUTODMA,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.udma_mask = 0x3f,
.bootable = OFF_BOARD,
- .extra = 240
+ .extra = 240,
+ .pio_mask = ATA_PIO4,
},{ /* 5 */
.name = "HPT372N",
.init_setup = init_setup_hpt372n,
.init_chipset = init_chipset_hpt366,
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
- .channels = 2, /* 4 */
.autodma = AUTODMA,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.udma_mask = HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f,
.bootable = OFF_BOARD,
- .extra = 240
+ .extra = 240,
+ .pio_mask = ATA_PIO4,
}
};
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index ff48c23..95dbed7 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -82,7 +82,7 @@ static void it8213_tuneproc (ide_drive_t *drive, u8 pio)
{ 2, 1 },
{ 2, 3 }, };
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
spin_lock_irqsave(&tune_lock, flags);
pci_read_config_word(dev, master_port, &master_data);
@@ -214,7 +214,7 @@ static int it8213_config_drive_for_dma (ide_drive_t *drive)
if (ide_tune_dma(drive))
return 0;
- pio = ide_get_best_pio_mode(drive, 255, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, 255, 4);
it8213_tune_chipset(drive, XFER_PIO_0 + pio);
return -1;
@@ -272,10 +272,11 @@ static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
{ \
.name = name_str, \
.init_hwif = init_hwif_it8213, \
- .channels = 1, \
.autodma = AUTODMA, \
.enablebits = {{0x41,0x80,0x80}}, \
.bootable = ON_BOARD, \
+ .host_flags = IDE_HFLAG_SINGLE, \
+ .pio_mask = ATA_PIO4, \
}
static ide_pci_device_t it8213_chipsets[] __devinitdata = {
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index 8197b65..9286c99 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -255,7 +255,7 @@ static int it821x_tunepio(ide_drive_t *drive, u8 set_pio)
* on the cable.
*/
if (pair) {
- u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4, NULL);
+ u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4);
/* trim PIO to the slowest of the master/slave */
if (pair_pio < set_pio)
set_pio = pair_pio;
@@ -276,7 +276,7 @@ static int it821x_tunepio(ide_drive_t *drive, u8 set_pio)
static void it821x_tuneproc(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
(void)it821x_tunepio(drive, pio);
}
@@ -718,10 +718,10 @@ static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev, const cha
.name = name_str, \
.init_chipset = init_chipset_it821x, \
.init_hwif = init_hwif_it821x, \
- .channels = 2, \
.autodma = AUTODMA, \
.bootable = ON_BOARD, \
- .fixup = it821x_fixups \
+ .fixup = it821x_fixups, \
+ .pio_mask = ATA_PIO4, \
}
static ide_pci_device_t it821x_chipsets[] __devinitdata = {
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c
index a6008f6..d7ce9dd 100644
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -97,7 +97,7 @@ static void jmicron_tuneproc (ide_drive_t *drive, byte mode_wanted)
static void config_jmicron_chipset_for_pio (ide_drive_t *drive, byte set_speed)
{
- u8 speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL);
+ u8 speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5);
if (set_speed)
(void) ide_config_drive_speed(drive, speed);
}
@@ -177,10 +177,10 @@ fallback:
{ \
.name = name_str, \
.init_hwif = init_hwif_jmicron, \
- .channels = 2, \
.autodma = AUTODMA, \
.bootable = ON_BOARD, \
.enablebits = { {0x40, 1, 1}, {0x40, 0x10, 0x10} }, \
+ .pio_mask = ATA_PIO5, \
}
static ide_pci_device_t jmicron_chipsets[] __devinitdata = {
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index b310c4f..09941f3 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -281,7 +281,6 @@ static ide_pci_device_t ns87415_chipset __devinitdata = {
.init_iops = init_iops_ns87415,
#endif
.init_hwif = init_hwif_ns87415,
- .channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
};
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index aede7ee..3a2bb27 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -147,12 +147,12 @@ static void compute_pios(ide_drive_t *drive, u8 pio)
int d;
ide_hwif_t *hwif = HWIF(drive);
- drive->drive_data = ide_get_best_pio_mode(drive, pio, OPTI621_MAX_PIO, NULL);
+ drive->drive_data = ide_get_best_pio_mode(drive, pio, OPTI621_MAX_PIO);
for (d = 0; d < 2; ++d) {
drive = &hwif->drives[d];
if (drive->present) {
if (drive->drive_data == PIO_DONT_KNOW)
- drive->drive_data = ide_get_best_pio_mode(drive, 255, OPTI621_MAX_PIO, NULL);
+ drive->drive_data = ide_get_best_pio_mode(drive, 255, OPTI621_MAX_PIO);
#ifdef OPTI621_DEBUG
printk("%s: Selected PIO mode %d\n",
drive->name, drive->drive_data);
@@ -350,17 +350,17 @@ static ide_pci_device_t opti621_chipsets[] __devinitdata = {
{ /* 0 */
.name = "OPTI621",
.init_hwif = init_hwif_opti621,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x45,0x80,0x00}, {0x40,0x08,0x00}},
.bootable = ON_BOARD,
+ .pio_mask = ATA_PIO3,
},{ /* 1 */
.name = "OPTI621X",
.init_hwif = init_hwif_opti621,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x45,0x80,0x00}, {0x40,0x08,0x00}},
.bootable = ON_BOARD,
+ .pio_mask = ATA_PIO3,
}
};
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index ee5020d..8a66a28 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -219,7 +219,7 @@ static int pdcnew_tune_chipset(ide_drive_t *drive, u8 speed)
static void pdcnew_tune_drive(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
(void)pdcnew_tune_chipset(drive, XFER_PIO_0 + pio);
}
@@ -378,13 +378,6 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha
int f, r;
u8 pll_ctl0, pll_ctl1;
- if (dev->resource[PCI_ROM_RESOURCE].start) {
- pci_write_config_dword(dev, PCI_ROM_ADDRESS,
- dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
- printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name,
- (unsigned long)dev->resource[PCI_ROM_RESOURCE].start);
- }
-
#ifdef CONFIG_PPC_PMAC
apple_kiwi_init(dev);
#endif
@@ -573,63 +566,63 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = {
.init_setup = init_setup_pdcnew,
.init_chipset = init_chipset_pdcnew,
.init_hwif = init_hwif_pdc202new,
- .channels = 2,
.autodma = AUTODMA,
.bootable = OFF_BOARD,
+ .pio_mask = ATA_PIO4,
.udma_mask = 0x3f, /* udma0-5 */
},{ /* 1 */
.name = "PDC20269",
.init_setup = init_setup_pdcnew,
.init_chipset = init_chipset_pdcnew,
.init_hwif = init_hwif_pdc202new,
- .channels = 2,
.autodma = AUTODMA,
.bootable = OFF_BOARD,
+ .pio_mask = ATA_PIO4,
.udma_mask = 0x7f, /* udma0-6*/
},{ /* 2 */
.name = "PDC20270",
.init_setup = init_setup_pdc20270,
.init_chipset = init_chipset_pdcnew,
.init_hwif = init_hwif_pdc202new,
- .channels = 2,
.autodma = AUTODMA,
.bootable = OFF_BOARD,
+ .pio_mask = ATA_PIO4,
.udma_mask = 0x3f, /* udma0-5 */
},{ /* 3 */
.name = "PDC20271",
.init_setup = init_setup_pdcnew,
.init_chipset = init_chipset_pdcnew,
.init_hwif = init_hwif_pdc202new,
- .channels = 2,
.autodma = AUTODMA,
.bootable = OFF_BOARD,
+ .pio_mask = ATA_PIO4,
.udma_mask = 0x7f, /* udma0-6*/
},{ /* 4 */
.name = "PDC20275",
.init_setup = init_setup_pdcnew,
.init_chipset = init_chipset_pdcnew,
.init_hwif = init_hwif_pdc202new,
- .channels = 2,
.autodma = AUTODMA,
.bootable = OFF_BOARD,
+ .pio_mask = ATA_PIO4,
.udma_mask = 0x7f, /* udma0-6*/
},{ /* 5 */
.name = "PDC20276",
.init_setup = init_setup_pdc20276,
.init_chipset = init_chipset_pdcnew,
.init_hwif = init_hwif_pdc202new,
- .channels = 2,
.autodma = AUTODMA,
.bootable = OFF_BOARD,
+ .pio_mask = ATA_PIO4,
.udma_mask = 0x7f, /* udma0-6*/
},{ /* 6 */
.name = "PDC20277",
.init_setup = init_setup_pdcnew,
.init_chipset = init_chipset_pdcnew,
.init_hwif = init_hwif_pdc202new,
- .channels = 2,
.autodma = AUTODMA,
.bootable = OFF_BOARD,
+ .pio_mask = ATA_PIO4,
.udma_mask = 0x7f, /* udma0-6*/
}
};
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index 41ac4a9..fbcb0bb 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -145,7 +145,7 @@ static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed)
static void pdc202xx_tune_drive(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
pdc202xx_tune_chipset(drive, XFER_PIO_0 + pio);
}
@@ -316,14 +316,6 @@ static void pdc202xx_reset (ide_drive_t *drive)
static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev,
const char *name)
{
- /* This doesn't appear needed */
- if (dev->resource[PCI_ROM_RESOURCE].start) {
- pci_write_config_dword(dev, PCI_ROM_ADDRESS,
- dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
- printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name,
- (unsigned long)dev->resource[PCI_ROM_RESOURCE].start);
- }
-
return dev->irq;
}
@@ -449,10 +441,10 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = {
.init_chipset = init_chipset_pdc202xx,
.init_hwif = init_hwif_pdc202xx,
.init_dma = init_dma_pdc202xx,
- .channels = 2,
.autodma = AUTODMA,
.bootable = OFF_BOARD,
.extra = 16,
+ .pio_mask = ATA_PIO4,
.udma_mask = 0x07, /* udma0-2 */
},{ /* 1 */
.name = "PDC20262",
@@ -460,10 +452,10 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = {
.init_chipset = init_chipset_pdc202xx,
.init_hwif = init_hwif_pdc202xx,
.init_dma = init_dma_pdc202xx,
- .channels = 2,
.autodma = AUTODMA,
.bootable = OFF_BOARD,
.extra = 48,
+ .pio_mask = ATA_PIO4,
.udma_mask = 0x1f, /* udma0-4 */
},{ /* 2 */
.name = "PDC20263",
@@ -471,10 +463,10 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = {
.init_chipset = init_chipset_pdc202xx,
.init_hwif = init_hwif_pdc202xx,
.init_dma = init_dma_pdc202xx,
- .channels = 2,
.autodma = AUTODMA,
.bootable = OFF_BOARD,
.extra = 48,
+ .pio_mask = ATA_PIO4,
.udma_mask = 0x1f, /* udma0-4 */
},{ /* 3 */
.name = "PDC20265",
@@ -482,10 +474,10 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = {
.init_chipset = init_chipset_pdc202xx,
.init_hwif = init_hwif_pdc202xx,
.init_dma = init_dma_pdc202xx,
- .channels = 2,
.autodma = AUTODMA,
.bootable = OFF_BOARD,
.extra = 48,
+ .pio_mask = ATA_PIO4,
.udma_mask = 0x3f, /* udma0-5 */
},{ /* 4 */
.name = "PDC20267",
@@ -493,10 +485,10 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = {
.init_chipset = init_chipset_pdc202xx,
.init_hwif = init_hwif_pdc202xx,
.init_dma = init_dma_pdc202xx,
- .channels = 2,
.autodma = AUTODMA,
.bootable = OFF_BOARD,
.extra = 48,
+ .pio_mask = ATA_PIO4,
.udma_mask = 0x3f, /* udma0-5 */
}
};
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index 1372c35..4f69cd0 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -219,7 +219,7 @@ static void piix_tune_pio (ide_drive_t *drive, u8 pio)
*/
static void piix_tune_drive (ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
piix_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@@ -495,10 +495,10 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif)
.name = name_str, \
.init_chipset = init_chipset_piix, \
.init_hwif = init_hwif_piix, \
- .channels = 2, \
.autodma = AUTODMA, \
.enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \
.bootable = ON_BOARD, \
+ .pio_mask = ATA_PIO4, \
.udma_mask = udma, \
}
@@ -514,11 +514,11 @@ static ide_pci_device_t piix_pci_info[] __devinitdata = {
*/
.name = "MPIIX",
.init_hwif = init_hwif_piix,
- .channels = 2,
.autodma = NODMA,
.enablebits = {{0x6d,0xc0,0x80}, {0x6d,0xc0,0xc0}},
.bootable = ON_BOARD,
- .flags = IDEPCI_FLAG_ISA_PORTS
+ .host_flags = IDE_HFLAG_ISA_PORTS,
+ .pio_mask = ATA_PIO4,
},
/* 3 */ DECLARE_PIIX_DEV("PIIX3", 0x00), /* no udma */
diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c
index f8c9546..10e1ae7 100644
--- a/drivers/ide/pci/rz1000.c
+++ b/drivers/ide/pci/rz1000.c
@@ -52,7 +52,6 @@ static void __devinit init_hwif_rz1000 (ide_hwif_t *hwif)
static ide_pci_device_t rz1000_chipset __devinitdata = {
.name = "RZ100x",
.init_hwif = init_hwif_rz1000,
- .channels = 2,
.autodma = NODMA,
.bootable = ON_BOARD,
};
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index 523363c..9bdc969 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/sc1200.c Version 0.94 Mar 10 2007
+ * linux/drivers/ide/pci/sc1200.c Version 0.95 Jun 16 2007
*
* Copyright (C) 2000-2002 Mark Lord <mlord@xxxxxxxxx>
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
@@ -304,7 +304,7 @@ static void sc1200_tuneproc (ide_drive_t *drive, byte pio) /* mode=255 means "au
return;
}
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
printk("SC1200: %s: setting PIO mode%d\n", drive->name, pio);
if (sc1200_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
@@ -390,7 +390,7 @@ static int sc1200_resume (struct pci_dev *dev)
// loop over all interfaces that are part of this pci device:
//
while ((hwif = lookup_pci_dev(hwif, dev)) != NULL) {
- unsigned int basereg, r, d, format;
+ unsigned int basereg, r;
sc1200_saved_state_t *ss = (sc1200_saved_state_t *)hwif->config_data;
//
@@ -402,41 +402,6 @@ static int sc1200_resume (struct pci_dev *dev)
pci_write_config_dword(hwif->pci_dev, basereg + (r<<2), ss->regs[r]);
}
}
- //
- // Re-program drive PIO modes
- //
- pci_read_config_dword(hwif->pci_dev, basereg+4, &format);
- format = (format >> 31) & 1;
- if (format)
- format += sc1200_get_pci_clock();
- for (d = 0; d < 2; ++d) {
- ide_drive_t *drive = &(hwif->drives[d]);
- if (drive->present) {
- unsigned int pio, timings;
- pci_read_config_dword(hwif->pci_dev, basereg+(drive->select.b.unit << 3), &timings);
- for (pio = 0; pio <= 4; ++pio) {
- if (sc1200_pio_timings[format][pio] == timings)
- break;
- }
- if (pio > 4)
- pio = 255; /* autotune */
- (void)sc1200_tuneproc(drive, pio);
- }
- }
- //
- // Re-program drive DMA modes
- //
- for (d = 0; d < MAX_DRIVES; ++d) {
- ide_drive_t *drive = &(hwif->drives[d]);
- if (drive->present && !__ide_dma_bad_drive(drive)) {
- int enable_dma = drive->using_dma;
- hwif->dma_off_quietly(drive);
- if (sc1200_config_dma(drive))
- enable_dma = 0;
- if (enable_dma)
- hwif->dma_host_on(drive);
- }
- }
}
return 0;
}
@@ -471,9 +436,9 @@ static void __devinit init_hwif_sc1200 (ide_hwif_t *hwif)
static ide_pci_device_t sc1200_chipset __devinitdata = {
.name = "SC1200",
.init_hwif = init_hwif_sc1200,
- .channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
+ .pio_mask = ATA_PIO4,
};
static int __devinit sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index 7b87488..f668d23 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -165,9 +165,9 @@ scc_ide_outbsync(ide_drive_t * drive, u8 addr, unsigned long port)
ide_hwif_t *hwif = HWIF(drive);
out_be32((void*)port, addr);
- __asm__ __volatile__("eieio":::"memory");
+ eieio();
in_be32((void*)(hwif->dma_base + 0x01c));
- __asm__ __volatile__("eieio":::"memory");
+ eieio();
}
static void
@@ -210,7 +210,7 @@ static void scc_tuneproc(ide_drive_t *drive, byte mode_wanted)
unsigned char speed = XFER_PIO_0;
int offset;
- mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 4, NULL);
+ mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 4);
switch (mode_wanted) {
case 4:
speed = XFER_PIO_4;
@@ -401,6 +401,33 @@ static int scc_ide_dma_end(ide_drive_t * drive)
ide_hwif_t *hwif = HWIF(drive);
unsigned long intsts_port = hwif->dma_base + 0x014;
u32 reg;
+ int dma_stat, data_loss = 0;
+ static int retry = 0;
+
+ /* errata A308 workaround: Step5 (check data loss) */
+ /* We don't check non ide_disk because it is limited to UDMA4 */
+ if (!(in_be32((void __iomem *)IDE_ALTSTATUS_REG) & ERR_STAT) &&
+ drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) {
+ reg = in_be32((void __iomem *)intsts_port);
+ if (!(reg & INTSTS_ACTEINT)) {
+ printk(KERN_WARNING "%s: operation failed (transfer data loss)\n",
+ drive->name);
+ data_loss = 1;
+ if (retry++) {
+ struct request *rq = HWGROUP(drive)->rq;
+ int unit;
+ /* ERROR_RESET and drive->crc_count are needed
+ * to reduce DMA transfer mode in retry process.
+ */
+ if (rq)
+ rq->errors |= ERROR_RESET;
+ for (unit = 0; unit < MAX_DRIVES; unit++) {
+ ide_drive_t *drive = &hwif->drives[unit];
+ drive->crc_count++;
+ }
+ }
+ }
+ }
while (1) {
reg = in_be32((void __iomem *)intsts_port);
@@ -469,27 +496,25 @@ static int scc_ide_dma_end(ide_drive_t * drive)
break;
}
- return __ide_dma_end(drive);
+ dma_stat = __ide_dma_end(drive);
+ if (data_loss)
+ dma_stat |= 2; /* emulate DMA error (to retry command) */
+ return dma_stat;
}
/* returns 1 if dma irq issued, 0 otherwise */
static int scc_dma_test_irq(ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- u8 dma_stat = hwif->INB(hwif->dma_status);
+ ide_hwif_t *hwif = HWIF(drive);
+ u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014);
- /* return 1 if INTR asserted */
- if ((dma_stat & 4) == 4)
+ /* SCC errata A252,A308 workaround: Step4 */
+ if ((in_be32((void __iomem *)IDE_ALTSTATUS_REG) & ERR_STAT) &&
+ (int_stat & INTSTS_INTRQ))
return 1;
- /* Workaround for PTERADD: emulate DMA_INTR when
- * - IDE_STATUS[ERR] = 1
- * - INT_STATUS[INTRQ] = 1
- * - DMA_STATUS[IORACTA] = 1
- */
- if (in_be32((void __iomem *)IDE_ALTSTATUS_REG) & ERR_STAT &&
- in_be32((void __iomem *)(hwif->dma_base + 0x014)) & INTSTS_INTRQ &&
- dma_stat & 1)
+ /* SCC errata A308 workaround: Step5 (polling IOIRQS) */
+ if (int_stat & INTSTS_IOIRQS)
return 1;
if (!drive->waiting_for_dma)
@@ -498,6 +523,21 @@ static int scc_dma_test_irq(ide_drive_t *drive)
return 0;
}
+static u8 scc_udma_filter(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u8 mask = hwif->ultra_mask;
+
+ /* errata A308 workaround: limit non ide_disk drive to UDMA4 */
+ if ((drive->media != ide_disk) && (mask & 0xE0)) {
+ printk(KERN_INFO "%s: limit %s to UDMA4\n",
+ SCC_PATA_NAME, drive->name);
+ mask = 0x1F;
+ }
+
+ return mask;
+}
+
/**
* setup_mmio_scc - map CTRL/BMID region
* @dev: PCI device we are configuring
@@ -702,6 +742,7 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif)
hwif->tuneproc = scc_tuneproc;
hwif->ide_dma_check = scc_config_drive_for_dma;
hwif->ide_dma_test_irq = scc_dma_test_irq;
+ hwif->udma_filter = scc_udma_filter;
hwif->drives[0].autotune = IDE_TUNE_AUTO;
hwif->drives[1].autotune = IDE_TUNE_AUTO;
@@ -731,9 +772,10 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif)
.init_setup = init_setup_scc, \
.init_iops = init_iops_scc, \
.init_hwif = init_hwif_scc, \
- .channels = 1, \
.autodma = AUTODMA, \
.bootable = ON_BOARD, \
+ .host_flags = IDE_HFLAG_SINGLE, \
+ .pio_mask = ATA_PIO4, \
}
static ide_pci_device_t scc_chipsets[] __devinitdata = {
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index ed04e0c..9fead2e 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/serverworks.c Version 0.20 Jun 3 2007
+ * linux/drivers/ide/pci/serverworks.c Version 0.22 Jun 27 2007
*
* Copyright (C) 1998-2000 Michel Aubry
* Copyright (C) 1998-2000 Andrzej Krzysztofowicz
@@ -123,23 +123,45 @@ static u8 svwks_csb_check (struct pci_dev *dev)
}
return 0;
}
+
+static void svwks_tune_pio(ide_drive_t *drive, const u8 pio)
+{
+ static const u8 pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 };
+ static const u8 drive_pci[] = { 0x41, 0x40, 0x43, 0x42 };
+
+ struct pci_dev *dev = drive->hwif->pci_dev;
+
+ pci_write_config_byte(dev, drive_pci[drive->dn], pio_modes[pio]);
+
+ if (svwks_csb_check(dev)) {
+ u16 csb_pio = 0;
+
+ pci_read_config_word(dev, 0x4a, &csb_pio);
+
+ csb_pio &= ~(0x0f << (4 * drive->dn));
+ csb_pio |= (pio << (4 * drive->dn));
+
+ pci_write_config_word(dev, 0x4a, csb_pio);
+ }
+}
+
static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed)
{
static const u8 udma_modes[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 };
static const u8 dma_modes[] = { 0x77, 0x21, 0x20 };
- static const u8 pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 };
- static const u8 drive_pci[] = { 0x41, 0x40, 0x43, 0x42 };
static const u8 drive_pci2[] = { 0x45, 0x44, 0x47, 0x46 };
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 speed = ide_rate_filter(drive, xferspeed);
- u8 pio = ide_get_best_pio_mode(drive, 255, 4, NULL);
u8 unit = (drive->select.b.unit & 0x01);
- u8 csb5 = svwks_csb_check(dev);
- u8 ultra_enable = 0, ultra_timing = 0;
- u8 dma_timing = 0, pio_timing = 0;
- u16 csb5_pio = 0;
+
+ u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0;
+
+ if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
+ svwks_tune_pio(drive, speed - XFER_PIO_0);
+ return ide_config_drive_speed(drive, speed);
+ }
/* If we are about to put a disk into UDMA mode we screwed up.
Our code assumes we never _ever_ do this on an OSB4 */
@@ -149,31 +171,15 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed)
BUG();
pci_read_config_byte(dev, (0x56|hwif->channel), &ultra_timing);
- pci_read_config_word(dev, 0x4A, &csb5_pio);
pci_read_config_byte(dev, 0x54, &ultra_enable);
ultra_timing &= ~(0x0F << (4*unit));
ultra_enable &= ~(0x01 << drive->dn);
- csb5_pio &= ~(0x0F << (4*drive->dn));
switch(speed) {
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- pio_timing |= pio_modes[speed - XFER_PIO_0];
- csb5_pio |= ((speed - XFER_PIO_0) << (4*drive->dn));
- break;
-
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_MW_DMA_0:
- /*
- * TODO: always setup PIO mode so this won't be needed
- */
- pio_timing |= pio_modes[pio];
- csb5_pio |= (pio << (4*drive->dn));
dma_timing |= dma_modes[speed - XFER_MW_DMA_0];
break;
@@ -183,11 +189,6 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed)
case XFER_UDMA_2:
case XFER_UDMA_1:
case XFER_UDMA_0:
- /*
- * TODO: always setup PIO mode so this won't be needed
- */
- pio_timing |= pio_modes[pio];
- csb5_pio |= (pio << (4*drive->dn));
dma_timing |= dma_modes[2];
ultra_timing |= ((udma_modes[speed - XFER_UDMA_0]) << (4*unit));
ultra_enable |= (0x01 << drive->dn);
@@ -195,10 +196,6 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed)
break;
}
- pci_write_config_byte(dev, drive_pci[drive->dn], pio_timing);
- if (csb5)
- pci_write_config_word(dev, 0x4A, csb5_pio);
-
pci_write_config_byte(dev, drive_pci2[drive->dn], dma_timing);
pci_write_config_byte(dev, (0x56|hwif->channel), ultra_timing);
pci_write_config_byte(dev, 0x54, ultra_enable);
@@ -208,8 +205,9 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed)
static void svwks_tune_drive (ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
- (void)svwks_tune_chipset(drive, XFER_PIO_0 + pio);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
+ svwks_tune_pio(drive, pio);
+ (void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
static int svwks_config_drive_xfer_rate (ide_drive_t *drive)
@@ -389,8 +387,6 @@ static u8 __devinit ata66_svwks(ide_hwif_t *hwif)
static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
{
- u8 dma_stat = 0;
-
if (!hwif->irq)
hwif->irq = hwif->channel ? 15 : 14;
@@ -407,11 +403,11 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
hwif->autodma = 0;
- if (!hwif->dma_base) {
- hwif->drives[0].autotune = 1;
- hwif->drives[1].autotune = 1;
+ hwif->drives[0].autotune = 1;
+ hwif->drives[1].autotune = 1;
+
+ if (!hwif->dma_base)
return;
- }
hwif->ide_dma_check = &svwks_config_drive_xfer_rate;
if (hwif->pci_dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
@@ -421,11 +417,7 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
if (!noautodma)
hwif->autodma = 1;
- dma_stat = inb(hwif->dma_status);
- hwif->drives[0].autodma = (dma_stat & 0x20);
- hwif->drives[1].autodma = (dma_stat & 0x40);
- hwif->drives[0].autotune = (!(dma_stat & 0x20));
- hwif->drives[1].autotune = (!(dma_stat & 0x40));
+ hwif->drives[0].autodma = hwif->drives[1].autodma = 1;
}
static int __devinit init_setup_svwks (struct pci_dev *dev, ide_pci_device_t *d)
@@ -441,9 +433,12 @@ static int __devinit init_setup_csb6 (struct pci_dev *dev, ide_pci_device_t *d)
d->bootable = ON_BOARD;
}
- d->channels = ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE ||
- dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2) &&
- (!(PCI_FUNC(dev->devfn) & 1))) ? 1 : 2;
+ if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE ||
+ dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2) &&
+ (!(PCI_FUNC(dev->devfn) & 1)))
+ d->host_flags |= IDE_HFLAG_SINGLE;
+ else
+ d->host_flags &= ~IDE_HFLAG_SINGLE;
return ide_setup_pci_device(dev, d);
}
@@ -454,41 +449,43 @@ static ide_pci_device_t serverworks_chipsets[] __devinitdata = {
.init_setup = init_setup_svwks,
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
- .channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
+ .pio_mask = ATA_PIO4,
},{ /* 1 */
.name = "SvrWks CSB5",
.init_setup = init_setup_svwks,
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
- .channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
+ .pio_mask = ATA_PIO4,
},{ /* 2 */
.name = "SvrWks CSB6",
.init_setup = init_setup_csb6,
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
- .channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
+ .pio_mask = ATA_PIO4,
},{ /* 3 */
.name = "SvrWks CSB6",
.init_setup = init_setup_csb6,
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
- .channels = 1, /* 2 */
.autodma = AUTODMA,
.bootable = ON_BOARD,
+ .host_flags = IDE_HFLAG_SINGLE,
+ .pio_mask = ATA_PIO4,
},{ /* 4 */
.name = "SvrWks HT1000",
.init_setup = init_setup_svwks,
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
- .channels = 1, /* 2 */
.autodma = AUTODMA,
.bootable = ON_BOARD,
+ .host_flags = IDE_HFLAG_SINGLE,
+ .pio_mask = ATA_PIO4,
}
};
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index d396b29..5714576 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -586,6 +586,7 @@ ide_init_sgiioc4(ide_hwif_t * hwif)
hwif->ultra_mask = 0x0; /* Disable Ultra DMA */
hwif->mwdma_mask = 0x2; /* Multimode-2 DMA */
hwif->swdma_mask = 0x2;
+ hwif->pio_mask = 0x00;
hwif->tuneproc = NULL; /* Sets timing for PIO mode */
hwif->speedproc = NULL; /* Sets timing for DMA &/or PIO modes */
hwif->selectproc = NULL;/* Use the default routine to select drive */
@@ -724,10 +725,10 @@ static ide_pci_device_t sgiioc4_chipset __devinitdata = {
.name = "SGIIOC4",
.init_hwif = ide_init_sgiioc4,
.init_dma = ide_dma_sgiioc4,
- .channels = 1,
.autodma = AUTODMA,
/* SGI IOC4 doesn't have enablebits. */
.bootable = ON_BOARD,
+ .host_flags = IDE_HFLAG_SINGLE,
};
int
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 1c3e354..50f6d17 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -1,9 +1,10 @@
/*
- * linux/drivers/ide/pci/siimage.c Version 1.12 Mar 10 2007
+ * linux/drivers/ide/pci/siimage.c Version 1.15 Jun 29 2007
*
* Copyright (C) 2001-2002 Andre Hedrick <andre@xxxxxxxxxxxxx>
* Copyright (C) 2003 Red Hat <alan@xxxxxxxxxx>
* Copyright (C) 2007 MontaVista Software, Inc.
+ * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
* May be copied or modified under the terms of the GNU General Public License
*
@@ -31,6 +32,10 @@
* unplugging/replugging the virtual CD interface when the DRAC is reset.
* This often causes drivers/ide/siimage to panic but is ok with the rather
* smarter code in libata.
+ *
+ * TODO:
+ * - IORDY fixes
+ * - VDMA support
*/
#include <linux/types.h>
@@ -160,82 +165,45 @@ out:
}
/**
- * siimage_taskfile_timing - turn timing data to a mode
- * @hwif: interface to query
- *
- * Read the timing data for the interface and return the
- * mode that is being used.
- */
-
-static byte siimage_taskfile_timing (ide_hwif_t *hwif)
-{
- u16 timing = 0x328a;
- unsigned long addr = siimage_selreg(hwif, 2);
-
- if (hwif->mmio)
- timing = hwif->INW(addr);
- else
- pci_read_config_word(hwif->pci_dev, addr, &timing);
-
- switch (timing) {
- case 0x10c1: return 4;
- case 0x10c3: return 3;
- case 0x1104:
- case 0x1281: return 2;
- case 0x2283: return 1;
- case 0x328a:
- default: return 0;
- }
-}
-
-/**
- * simmage_tuneproc - tune a drive
+ * sil_tune_pio - tune a drive
* @drive: drive to tune
- * @mode_wanted: the target operating mode
+ * @pio: the desired PIO mode
*
* Load the timing settings for this device mode into the
* controller. If we are in PIO mode 3 or 4 turn on IORDY
* monitoring (bit 9). The TF timing is bits 31:16
*/
-
-static void siimage_tuneproc (ide_drive_t *drive, byte mode_wanted)
+
+static void sil_tune_pio(ide_drive_t *drive, u8 pio)
{
+ const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 };
+ const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 };
+
ide_hwif_t *hwif = HWIF(drive);
+ ide_drive_t *pair = &hwif->drives[drive->dn ^ 1];
u32 speedt = 0;
u16 speedp = 0;
unsigned long addr = siimage_seldev(drive, 0x04);
unsigned long tfaddr = siimage_selreg(hwif, 0x02);
-
- /* cheat for now and use the docs */
- switch (mode_wanted) {
- case 4:
- speedp = 0x10c1;
- speedt = 0x10c1;
- break;
- case 3:
- speedp = 0x10c3;
- speedt = 0x10c3;
- break;
- case 2:
- speedp = 0x1104;
- speedt = 0x1281;
- break;
- case 1:
- speedp = 0x2283;
- speedt = 0x2283;
- break;
- case 0:
- default:
- speedp = 0x328a;
- speedt = 0x328a;
- break;
+ u8 tf_pio = pio;
+
+ /* trim *taskfile* PIO to the slowest of the master/slave */
+ if (pair->present) {
+ u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4);
+
+ if (pair_pio < tf_pio)
+ tf_pio = pair_pio;
}
+ /* cheat for now and use the docs */
+ speedp = data_speed[pio];
+ speedt = tf_speed[tf_pio];
+
if (hwif->mmio) {
hwif->OUTW(speedp, addr);
hwif->OUTW(speedt, tfaddr);
/* Now set up IORDY */
- if(mode_wanted == 3 || mode_wanted == 4)
+ if (pio > 2)
hwif->OUTW(hwif->INW(tfaddr-2)|0x200, tfaddr-2);
else
hwif->OUTW(hwif->INW(tfaddr-2)&~0x200, tfaddr-2);
@@ -245,42 +213,17 @@ static void siimage_tuneproc (ide_drive_t *drive, byte mode_wanted)
pci_read_config_word(hwif->pci_dev, tfaddr-2, &speedp);
speedp &= ~0x200;
/* Set IORDY for mode 3 or 4 */
- if(mode_wanted == 3 || mode_wanted == 4)
+ if (pio > 2)
speedp |= 0x200;
pci_write_config_word(hwif->pci_dev, tfaddr-2, speedp);
}
}
-/**
- * config_siimage_chipset_for_pio - set drive timings
- * @drive: drive to tune
- * @speed we want
- *
- * Compute the best pio mode we can for a given device. Also honour
- * the timings for the driver when dealing with mixed devices. Some
- * of this is ugly but its all wrapped up here
- *
- * The SI680 can also do VDMA - we need to start using that
- *
- * FIXME: we use the BIOS channel timings to avoid driving the task
- * files too fast at the disk. We need to compute the master/slave
- * drive PIO mode properly so that we can up the speed on a hotplug
- * system.
- */
-
-static void config_siimage_chipset_for_pio (ide_drive_t *drive, byte set_speed)
+static void sil_tuneproc(ide_drive_t *drive, u8 pio)
{
- u8 channel_timings = siimage_taskfile_timing(HWIF(drive));
- u8 speed = 0, set_pio = ide_get_best_pio_mode(drive, 4, 5, NULL);
-
- /* WARNING PIO timing mess is going to happen b/w devices, argh */
- if ((channel_timings != set_pio) && (set_pio > channel_timings))
- set_pio = channel_timings;
-
- siimage_tuneproc(drive, set_pio);
- speed = XFER_PIO_0 + set_pio;
- if (set_speed)
- (void) ide_config_drive_speed(drive, speed);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
+ sil_tune_pio(drive, pio);
+ (void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
/**
@@ -335,7 +278,7 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed)
case XFER_PIO_2:
case XFER_PIO_1:
case XFER_PIO_0:
- siimage_tuneproc(drive, (speed - XFER_PIO_0));
+ sil_tune_pio(drive, speed - XFER_PIO_0);
mode |= ((unit) ? 0x10 : 0x01);
break;
case XFER_MW_DMA_2:
@@ -343,7 +286,6 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed)
case XFER_MW_DMA_0:
multi = dma[speed - XFER_MW_DMA_0];
mode |= ((unit) ? 0x20 : 0x02);
- config_siimage_chipset_for_pio(drive, 0);
break;
case XFER_UDMA_6:
case XFER_UDMA_5:
@@ -356,7 +298,6 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed)
ultra |= ((scsc) ? (ultra6[speed - XFER_UDMA_0]) :
(ultra5[speed - XFER_UDMA_0]));
mode |= ((unit) ? 0x30 : 0x03);
- config_siimage_chipset_for_pio(drive, 0);
break;
default:
return 1;
@@ -390,7 +331,7 @@ static int siimage_config_drive_for_dma (ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
- config_siimage_chipset_for_pio(drive, 1);
+ sil_tuneproc(drive, 255);
return -1;
}
@@ -961,7 +902,7 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
hwif->resetproc = &siimage_reset;
hwif->speedproc = &siimage_tune_chipset;
- hwif->tuneproc = &siimage_tuneproc;
+ hwif->tuneproc = &sil_tuneproc;
hwif->reset_poll = &siimage_reset_poll;
hwif->pre_reset = &siimage_pre_reset;
hwif->udma_filter = &sil_udma_filter;
@@ -976,11 +917,11 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
first = 0;
}
}
- if (!hwif->dma_base) {
- hwif->drives[0].autotune = 1;
- hwif->drives[1].autotune = 1;
+
+ hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
+
+ if (hwif->dma_base == 0)
return;
- }
hwif->ultra_mask = 0x7f;
hwif->mwdma_mask = 0x07;
@@ -1016,9 +957,9 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
.init_iops = init_iops_siimage, \
.init_hwif = init_hwif_siimage, \
.fixup = siimage_fixup, \
- .channels = 2, \
.autodma = AUTODMA, \
.bootable = ON_BOARD, \
+ .pio_mask = ATA_PIO4, \
}
static ide_pci_device_t siimage_chipsets[] __devinitdata = {
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 756a9b6..63fbb79 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -521,7 +521,7 @@ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio)
static int sis5513_tune_drive(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
config_art_rwp_pio(drive, pio);
return ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@@ -878,10 +878,10 @@ static ide_pci_device_t sis5513_chipset __devinitdata = {
.name = "SIS5513",
.init_chipset = init_chipset_sis5513,
.init_hwif = init_hwif_sis5513,
- .channels = 2,
.autodma = NOAUTODMA,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.bootable = ON_BOARD,
+ .pio_mask = ATA_PIO4,
};
static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index a7323d2..0947cab 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -52,12 +52,13 @@
* Convert a PIO mode and cycle time to the required on/off times
* for the interface. This has protection against runaway timings.
*/
-static unsigned int get_pio_timings(ide_pio_data_t *p)
+static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
{
unsigned int cmd_on, cmd_off;
+ u8 iordy = 0;
- cmd_on = (ide_pio_timings[p->pio_mode].active_time + 29) / 30;
- cmd_off = (p->cycle_time - 30 * cmd_on + 29) / 30;
+ cmd_on = (ide_pio_timings[pio].active_time + 29) / 30;
+ cmd_off = (ide_pio_cycle_time(drive, pio) - 30 * cmd_on + 29) / 30;
if (cmd_on == 0)
cmd_on = 1;
@@ -65,7 +66,10 @@ static unsigned int get_pio_timings(ide_pio_data_t *p)
if (cmd_off == 0)
cmd_off = 1;
- return (cmd_on - 1) << 8 | (cmd_off - 1) | (p->use_iordy ? 0x40 : 0x00);
+ if (pio > 2 || ide_dev_has_iordy(drive->id))
+ iordy = 0x40;
+
+ return (cmd_on - 1) << 8 | (cmd_off - 1) | iordy;
}
/*
@@ -75,14 +79,13 @@ static u8 sl82c105_tune_pio(ide_drive_t *drive, u8 pio)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
int reg = 0x44 + drive->dn * 4;
- ide_pio_data_t p;
u16 drv_ctrl;
DBG(("sl82c105_tune_pio(drive:%s, pio:%u)\n", drive->name, pio));
- pio = ide_get_best_pio_mode(drive, pio, 5, &p);
+ pio = ide_get_best_pio_mode(drive, pio, 5);
- drv_ctrl = get_pio_timings(&p);
+ drv_ctrl = get_pio_timings(drive, pio);
/*
* Store the PIO timings so that we can restore them
@@ -101,7 +104,8 @@ static u8 sl82c105_tune_pio(ide_drive_t *drive, u8 pio)
}
printk(KERN_DEBUG "%s: selected %s (%dns) (%04X)\n", drive->name,
- ide_xfer_verbose(pio + XFER_PIO_0), p.cycle_time, drv_ctrl);
+ ide_xfer_verbose(pio + XFER_PIO_0),
+ ide_pio_cycle_time(drive, pio), drv_ctrl);
return pio;
}
@@ -449,10 +453,10 @@ static ide_pci_device_t sl82c105_chipset __devinitdata = {
.name = "W82C105",
.init_chipset = init_chipset_sl82c105,
.init_hwif = init_hwif_sl82c105,
- .channels = 2,
.autodma = NOAUTODMA,
.enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}},
.bootable = ON_BOARD,
+ .pio_mask = ATA_PIO5,
};
static int __devinit sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index 575dbbd..8e655f2 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -103,7 +103,7 @@ static void slc90e66_tune_pio (ide_drive_t *drive, u8 pio)
static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
slc90e66_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@@ -214,10 +214,10 @@ static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif)
static ide_pci_device_t slc90e66_chipset __devinitdata = {
.name = "SLC90E66",
.init_hwif = init_hwif_slc90e66,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}},
.bootable = ON_BOARD,
+ .pio_mask = ATA_PIO4,
};
static int __devinit slc90e66_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index 8de1f8e..ec79bac 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -47,7 +47,7 @@ static int tc86c001_tune_chipset(ide_drive_t *drive, u8 speed)
static void tc86c001_tune_drive(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
(void) tc86c001_tune_chipset(drive, XFER_PIO_0 + pio);
}
@@ -248,9 +248,10 @@ static ide_pci_device_t tc86c001_chipset __devinitdata = {
.name = "TC86C001",
.init_chipset = init_chipset_tc86c001,
.init_hwif = init_hwif_tc86c001,
- .channels = 1,
.autodma = AUTODMA,
- .bootable = OFF_BOARD
+ .bootable = OFF_BOARD,
+ .host_flags = IDE_HFLAG_SINGLE,
+ .pio_mask = ATA_PIO4,
};
static int __devinit tc86c001_init_one(struct pci_dev *dev,
diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c
index 35e8c61..024bbfa 100644
--- a/drivers/ide/pci/triflex.c
+++ b/drivers/ide/pci/triflex.c
@@ -96,7 +96,7 @@ static int triflex_tune_chipset(ide_drive_t *drive, u8 xferspeed)
static void triflex_tune_drive(ide_drive_t *drive, u8 pio)
{
- int use_pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ int use_pio = ide_get_best_pio_mode(drive, pio, 4);
(void) triflex_tune_chipset(drive, (XFER_PIO_0 + use_pio));
}
@@ -129,10 +129,10 @@ static void __devinit init_hwif_triflex(ide_hwif_t *hwif)
static ide_pci_device_t triflex_device __devinitdata = {
.name = "TRIFLEX",
.init_hwif = init_hwif_triflex,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}},
.bootable = ON_BOARD,
+ .pio_mask = ATA_PIO4,
};
static int __devinit triflex_init_one(struct pci_dev *dev,
diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c
index cbb1b11..dc4f4e2 100644
--- a/drivers/ide/pci/trm290.c
+++ b/drivers/ide/pci/trm290.c
@@ -327,7 +327,6 @@ static void __devinit init_hwif_trm290(ide_hwif_t *hwif)
static ide_pci_device_t trm290_chipset __devinitdata = {
.name = "TRM290",
.init_hwif = init_hwif_trm290,
- .channels = 2,
.autodma = NOAUTODMA,
.bootable = ON_BOARD,
};
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index 27e92fb..581316f 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -1,6 +1,6 @@
/*
*
- * Version 3.45
+ * Version 3.46
*
* VIA IDE driver for Linux. Supported southbridges:
*
@@ -203,10 +203,8 @@ static int via_set_drive(ide_drive_t *drive, u8 speed)
static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio)
{
- if (pio == 255) {
- via_set_drive(drive, ide_find_best_pio_mode(drive));
- return;
- }
+ if (pio == 255)
+ pio = ide_get_best_pio_mode(drive, 255, 5);
via_set_drive(drive, XFER_PIO_0 + min_t(u8, pio, 5));
}
@@ -223,12 +221,14 @@ static int via82cxxx_ide_dma_check (ide_drive_t *drive)
{
u8 speed = ide_max_dma_mode(drive);
- if (speed == 0)
- speed = ide_find_best_pio_mode(drive);
+ if (speed == 0) {
+ via82cxxx_tune_drive(drive, 255);
+ return -1;
+ }
via_set_drive(drive, speed);
- if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
+ if (drive->autodma)
return 0;
return -1;
@@ -498,18 +498,22 @@ static ide_pci_device_t via82cxxx_chipsets[] __devinitdata = {
.name = "VP_IDE",
.init_chipset = init_chipset_via82cxxx,
.init_hwif = init_hwif_via82cxxx,
- .channels = 2,
.autodma = NOAUTODMA,
.enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}},
- .bootable = ON_BOARD
+ .bootable = ON_BOARD,
+ .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST
+ | IDE_HFLAG_PIO_NO_DOWNGRADE,
+ .pio_mask = ATA_PIO5,
},{ /* 1 */
.name = "VP_IDE",
.init_chipset = init_chipset_via82cxxx,
.init_hwif = init_hwif_via82cxxx,
- .channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x00,0x00,0x00}, {0x00,0x00,0x00}},
.bootable = ON_BOARD,
+ .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST
+ | IDE_HFLAG_PIO_NO_DOWNGRADE,
+ .pio_mask = ATA_PIO5,
}
};
diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c
index 82de2d7..8859fe2 100644
--- a/drivers/ide/ppc/mpc8xx.c
+++ b/drivers/ide/ppc/mpc8xx.c
@@ -316,6 +316,7 @@ m8xx_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
}
/* register routine to tune PIO mode */
+ ide_hwifs[data_port].pio_mask = ATA_PIO4;
ide_hwifs[data_port].tuneproc = m8xx_ide_tuneproc;
hw->ack_intr = (ide_ack_intr_t *) ide_interrupt_ack;
@@ -402,6 +403,7 @@ void m8xx_ide_init_hwif_ports (hw_regs_t *hw,
}
/* register routine to tune PIO mode */
+ ide_hwifs[data_port].pio_mask = ATA_PIO4;
ide_hwifs[data_port].tuneproc = m8xx_ide_tuneproc;
hw->ack_intr = (ide_ack_intr_t *) ide_interrupt_ack;
@@ -431,13 +433,12 @@ void m8xx_ide_init_hwif_ports (hw_regs_t *hw,
static void
m8xx_ide_tuneproc(ide_drive_t *drive, u8 pio)
{
- ide_pio_data_t d;
#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT)
volatile pcmconf8xx_t *pcmp;
ulong timing, mask, reg;
#endif
- pio = ide_get_best_pio_mode(drive, pio, 4, &d);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
#if 1
printk("%s[%d] %s: best PIO mode: %d\n",
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index e46f472..33630ad 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -615,24 +615,25 @@ out:
static void
pmac_ide_tuneproc(ide_drive_t *drive, u8 pio)
{
- ide_pio_data_t d;
u32 *timings;
unsigned accessTicks, recTicks;
unsigned accessTime, recTime;
pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
-
+ unsigned int cycle_time;
+
if (pmif == NULL)
return;
/* which drive is it ? */
timings = &pmif->timings[drive->select.b.unit & 0x01];
- pio = ide_get_best_pio_mode(drive, pio, 4, &d);
+ pio = ide_get_best_pio_mode(drive, pio, 4);
+ cycle_time = ide_pio_cycle_time(drive, pio);
switch (pmif->kind) {
case controller_sh_ata6: {
/* 133Mhz cell */
- u32 tr = kauai_lookup_timing(shasta_pio_timings, d.cycle_time);
+ u32 tr = kauai_lookup_timing(shasta_pio_timings, cycle_time);
if (tr == 0)
return;
*timings = ((*timings) & ~TR_133_PIOREG_PIO_MASK) | tr;
@@ -641,7 +642,7 @@ pmac_ide_tuneproc(ide_drive_t *drive, u8 pio)
case controller_un_ata6:
case controller_k2_ata6: {
/* 100Mhz cell */
- u32 tr = kauai_lookup_timing(kauai_pio_timings, d.cycle_time);
+ u32 tr = kauai_lookup_timing(kauai_pio_timings, cycle_time);
if (tr == 0)
return;
*timings = ((*timings) & ~TR_100_PIOREG_PIO_MASK) | tr;
@@ -649,7 +650,7 @@ pmac_ide_tuneproc(ide_drive_t *drive, u8 pio)
}
case controller_kl_ata4:
/* 66Mhz cell */
- recTime = d.cycle_time - ide_pio_timings[pio].active_time
+ recTime = cycle_time - ide_pio_timings[pio].active_time
- ide_pio_timings[pio].setup_time;
recTime = max(recTime, 150U);
accessTime = ide_pio_timings[pio].active_time;
@@ -665,7 +666,7 @@ pmac_ide_tuneproc(ide_drive_t *drive, u8 pio)
default: {
/* 33Mhz cell */
int ebit = 0;
- recTime = d.cycle_time - ide_pio_timings[pio].active_time
+ recTime = cycle_time - ide_pio_timings[pio].active_time
- ide_pio_timings[pio].setup_time;
recTime = max(recTime, 150U);
accessTime = ide_pio_timings[pio].active_time;
@@ -1247,6 +1248,7 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
hwif->drives[0].unmask = 1;
hwif->drives[1].unmask = 1;
+ hwif->pio_mask = ATA_PIO4;
hwif->tuneproc = pmac_ide_tuneproc;
if (pmif->kind == controller_un_ata6
|| pmif->kind == controller_k2_ata6
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index c88d332..30e596c 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -5,12 +5,6 @@
*
* Copyright (c) 1995-1998 Mark Lord
* May be copied or modified under the terms of the GNU General Public License
- *
- * Recent Changes
- * Split the set up function into multiple functions
- * Use pci_set_master
- * Fix misreporting of I/O v MMIO problems
- * Initial fixups for simplex devices
*/
/*
@@ -407,7 +401,7 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, ide_pci_device_t *d,
unsigned long ctl = 0, base = 0;
ide_hwif_t *hwif;
- if ((d->flags & IDEPCI_FLAG_ISA_PORTS) == 0) {
+ if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) {
/* Possibly we should fail if these checks report true */
ide_pci_check_iomem(dev, d, 2*port);
ide_pci_check_iomem(dev, d, 2*port+1);
@@ -571,7 +565,7 @@ out:
void ide_pci_setup_ports(struct pci_dev *dev, ide_pci_device_t *d, int pciirq, ata_index_t *index)
{
- int port;
+ int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port;
int at_least_one_hwif_enabled = 0;
ide_hwif_t *hwif, *mate = NULL;
u8 tmp;
@@ -582,16 +576,13 @@ void ide_pci_setup_ports(struct pci_dev *dev, ide_pci_device_t *d, int pciirq, a
* Set up the IDE ports
*/
- for (port = 0; port <= 1; ++port) {
+ for (port = 0; port < channels; ++port) {
ide_pci_enablebit_t *e = &(d->enablebits[port]);
if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) ||
(tmp & e->mask) != e->val))
continue; /* port not enabled */
- if (d->channels <= port)
- break;
-
if ((hwif = ide_hwif_configure(dev, d, mate, port, pciirq)) == NULL)
continue;
@@ -616,6 +607,9 @@ void ide_pci_setup_ports(struct pci_dev *dev, ide_pci_device_t *d, int pciirq, a
else
ide_hwif_setup_dma(dev, d, hwif);
bypass_legacy_dma:
+ hwif->host_flags = d->host_flags;
+ hwif->pio_mask = d->pio_mask;
+
if (d->init_hwif)
/* Call chipset-specific routine
* for each enabled hwif
diff --git a/include/linux/ata.h b/include/linux/ata.h
index b5a2016..23a22df 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -64,6 +64,15 @@ enum {
ATA_ID_PROD_LEN = 40,
ATA_PCI_CTL_OFS = 2,
+
+ ATA_PIO0 = (1 << 0),
+ ATA_PIO1 = ATA_PIO0 | (1 << 1),
+ ATA_PIO2 = ATA_PIO1 | (1 << 2),
+ ATA_PIO3 = ATA_PIO2 | (1 << 3),
+ ATA_PIO4 = ATA_PIO3 | (1 << 4),
+ ATA_PIO5 = ATA_PIO4 | (1 << 5),
+ ATA_PIO6 = ATA_PIO5 | (1 << 6),
+
ATA_UDMA0 = (1 << 0),
ATA_UDMA1 = ATA_UDMA0 | (1 << 1),
ATA_UDMA2 = ATA_UDMA1 | (1 << 2),
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 19ab258..5f5daad 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -681,6 +681,10 @@ typedef struct hwif_s {
u8 straight8; /* Alan's straight 8 check */
u8 bus_state; /* power state of the IDE bus */
+ u8 host_flags;
+
+ u8 pio_mask;
+
u8 atapi_dma; /* host supports atapi_dma */
u8 ultra_mask;
u8 mwdma_mask;
@@ -1244,7 +1248,13 @@ typedef struct ide_pci_enablebit_s {
enum {
/* Uses ISA control ports not PCI ones. */
- IDEPCI_FLAG_ISA_PORTS = (1 << 0),
+ IDE_HFLAG_ISA_PORTS = (1 << 0),
+ /* single port device */
+ IDE_HFLAG_SINGLE = (1 << 1),
+ /* don't use legacy PIO blacklist */
+ IDE_HFLAG_PIO_NO_BLACKLIST = (1 << 2),
+ /* don't use conservative PIO "downgrade" */
+ IDE_HFLAG_PIO_NO_DOWNGRADE = (1 << 3),
};
typedef struct ide_pci_device_s {
@@ -1256,13 +1266,13 @@ typedef struct ide_pci_device_s {
void (*init_hwif)(ide_hwif_t *);
void (*init_dma)(ide_hwif_t *, unsigned long);
void (*fixup)(ide_hwif_t *);
- u8 channels;
u8 autodma;
ide_pci_enablebit_t enablebits[2];
u8 bootable;
unsigned int extra;
struct ide_pci_device_s *next;
- u8 flags;
+ u8 host_flags;
+ u8 pio_mask;
u8 udma_mask;
} ide_pci_device_t;
@@ -1363,6 +1373,11 @@ extern void ide_toggle_bounce(ide_drive_t *drive, int on);
extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);
int ide_use_fast_pio(ide_drive_t *);
+static inline int ide_dev_has_iordy(struct hd_driveid *id)
+{
+ return ((id->field_valid & 2) && (id->capability & 8)) ? 1 : 0;
+}
+
u8 ide_dump_status(ide_drive_t *, const char *, u8);
typedef struct ide_pio_timings_s {
@@ -1372,14 +1387,8 @@ typedef struct ide_pio_timings_s {
/* active + recovery (+ setup for some chips) */
} ide_pio_timings_t;
-typedef struct ide_pio_data_s {
- u8 pio_mode;
- u8 use_iordy;
- u8 overridden;
- unsigned int cycle_time;
-} ide_pio_data_t;
-
-extern u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d);
+unsigned int ide_pio_cycle_time(ide_drive_t *, u8);
+u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
extern const ide_pio_timings_t ide_pio_timings[6];
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/