sata_mv not working with a RocketRaid 2220

From: Jean-Louis Dupond
Date: Sun Dec 16 2007 - 18:23:37 EST

Next message: Pavel Machek: "Re: [PATCH] x86_64: fix problems due to use of "outb" to port 80on some AMD64x2 laptops, etc."
Previous message: David Miller: "Re: sockets affected by IPsec always block (2.6.23)"
Next in thread: Jean-Louis Dupond: "sata_mv not working with a RocketRaid 2220"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hello,

I'm trying to get my HighPoint RocketRaid Controller working with the sata_mv drivers.
But something is not working correctly :(

Kernel version 2.6.23.11 (also tried 2.6.24-rc5 with same results)
Controller in lspci: Marvell Technology Group Ltd. MV88SX6081 8-port SATA II PCI-X Controller (rev 07)

1.
Dec 16 22:44:29 localhost kernel: sata_mv 0000:05:08.0: Gen-II 32
slots 8 ports SCSI mode IRQ via INTx
2.
Dec 16 22:44:29 localhost kernel: scsi4 : sata_mv
3.
Dec 16 22:44:29 localhost kernel: scsi5 : sata_mv
4.
Dec 16 22:44:29 localhost kernel: scsi6 : sata_mv
5.
Dec 16 22:44:29 localhost kernel: scsi7 : sata_mv
6.
Dec 16 22:44:29 localhost kernel: scsi8 : sata_mv
7.
Dec 16 22:44:29 localhost kernel: scsi9 : sata_mv
8.
Dec 16 22:44:29 localhost kernel: scsi10 : sata_mv
9.
Dec 16 22:44:29 localhost kernel: scsi11 : sata_mv
10.
Dec 16 22:44:29 localhost kernel: ata5: SATA max UDMA/133 cmd
0x0000000000000000 ctl 0xffffc20010122120 bmdma 0x0000000000000000
irq 16
11.
Dec 16 22:44:29 localhost kernel: ata6: SATA max UDMA/133 cmd
0x0000000000000000 ctl 0xffffc20010124120 bmdma 0x0000000000000000
irq 16
12.
Dec 16 22:44:29 localhost kernel: ata7: SATA max UDMA/133 cmd
0x0000000000000000 ctl 0xffffc20010126120 bmdma 0x0000000000000000
irq 16
13.
Dec 16 22:44:29 localhost kernel: ata8: SATA max UDMA/133 cmd
0x0000000000000000 ctl 0xffffc20010128120 bmdma 0x0000000000000000
irq 16
14.
Dec 16 22:44:29 localhost kernel: ata9: SATA max UDMA/133 cmd
0x0000000000000000 ctl 0xffffc20010132120 bmdma 0x0000000000000000
irq 16
15.
Dec 16 22:44:29 localhost kernel: ata10: SATA max UDMA/133 cmd
0x0000000000000000 ctl 0xffffc20010134120 bmdma 0x0000000000000000
irq 16
16.
Dec 16 22:44:29 localhost kernel: ata11: SATA max UDMA/133 cmd
0x0000000000000000 ctl 0xffffc20010136120 bmdma 0x0000000000000000
irq 16
17.
Dec 16 22:44:29 localhost kernel: ata12: SATA max UDMA/133 cmd
0x0000000000000000 ctl 0xffffc20010138120 bmdma 0x0000000000000000
irq 16
18.
Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
19.
Dec 16 22:44:29 localhost kernel: ata5.00: ATA-7: SAMSUNG SP2504C,
VT100-33, max UDMA7
20.
Dec 16 22:44:29 localhost kernel: ata5.00: 488397168 sectors,
multi 0: LBA48 NCQ (depth 0/32)
21.
Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133
22.
Dec 16 22:44:29 localhost kernel: ata6: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
23.
Dec 16 22:44:29 localhost kernel: ata6.00: ATA-7: SAMSUNG SP2504C,
VT100-33, max UDMA7
24.
Dec 16 22:44:29 localhost kernel: ata6.00: 488397168 sectors,
multi 0: LBA48 NCQ (depth 0/32)
25.
Dec 16 22:44:29 localhost kernel: ata6.00: configured for UDMA/133
26.
Dec 16 22:44:29 localhost kernel: ata7: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
27.
Dec 16 22:44:29 localhost kernel: ata7.00: ATA-7: SAMSUNG SP2504C,
VT100-33, max UDMA7
28.
Dec 16 22:44:29 localhost kernel: ata7.00: 488397168 sectors,
multi 0: LBA48 NCQ (depth 0/32)
29.
Dec 16 22:44:29 localhost kernel: ata7.00: configured for UDMA/133
30.
Dec 16 22:44:29 localhost kernel: ata8: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
31.
Dec 16 22:44:29 localhost kernel: ata8.00: ATA-7: SAMSUNG SP2504C,
VT100-33, max UDMA7
32.
Dec 16 22:44:29 localhost kernel: ata8.00: 488397168 sectors,
multi 0: LBA48 NCQ (depth 0/32)
33.
Dec 16 22:44:29 localhost kernel: ata8.00: configured for UDMA/133
34.
Dec 16 22:44:29 localhost kernel: ata9: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
35.
Dec 16 22:44:29 localhost kernel: ata9.00: ATA-7: SAMSUNG SP2504C,
VT100-33, max UDMA7
36.
Dec 16 22:44:29 localhost kernel: ata9.00: 488397168 sectors,
multi 0: LBA48 NCQ (depth 0/32)
37.
Dec 16 22:44:29 localhost kernel: ata9.00: configured for UDMA/133
38.
Dec 16 22:44:29 localhost kernel: ata10: SATA link down (SStatus 0
SControl 300)
39.
Dec 16 22:44:29 localhost kernel: ata11: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
40.
Dec 16 22:44:29 localhost kernel: ata11.00: ATA-7: SAMSUNG
SP2504C, VT100-33, max UDMA7
41.
Dec 16 22:44:29 localhost kernel: ata11.00: 488397168 sectors,
multi 0: LBA48 NCQ (depth 0/32)
42.
Dec 16 22:44:29 localhost kernel: ata11.00: configured for UDMA/133
43.
Dec 16 22:44:29 localhost kernel: ata12: SATA link down (SStatus 0
SControl 300)
44.
Dec 16 22:44:29 localhost kernel: scsi 4:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
45.
Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] 488397168
512-byte hardware sectors (250059 MB)
46.
Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Write Protect
is off
47.
Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Mode Sense: 00
3a 00 00
48.
Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
49.
Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] 488397168
512-byte hardware sectors (250059 MB)
50.
Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Write Protect
is off
51.
Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Mode Sense: 00
3a 00 00
52.
Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
53.
Dec 16 22:44:29 localhost kernel: sdb:<3>ata5.00: exception Emask
0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
54.
Dec 16 22:44:29 localhost kernel: ata5.00: cmd
c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
55.
Dec 16 22:44:29 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
56.
Dec 16 22:44:29 localhost kernel: ata5: soft resetting port
57.
Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
58.
Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133
59.
Dec 16 22:44:29 localhost kernel: ata5: EH complete
60.
Dec 16 22:44:29 localhost kernel: ata5.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x2 frozen
61.
Dec 16 22:44:29 localhost kernel: ata5.00: cmd
c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
62.
Dec 16 22:44:29 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
63.
Dec 16 22:44:29 localhost kernel: ata5: soft resetting port
64.
Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
65.
Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133
66.
Dec 16 22:44:29 localhost kernel: ata5: EH complete
67.
Dec 16 22:44:29 localhost kernel: ata5.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x2 frozen
68.
Dec 16 22:44:29 localhost kernel: ata5.00: cmd
c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
69.
Dec 16 22:44:29 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
70.
Dec 16 22:44:29 localhost kernel: ata5: soft resetting port
71.
Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
72.
Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133
73.
Dec 16 22:44:29 localhost kernel: ata5: EH complete
74.
Dec 16 22:44:29 localhost kernel: ata5: limiting SATA link speed
to 1.5 Gbps
75.
Dec 16 22:44:29 localhost kernel: ata5.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x6 frozen
76.
Dec 16 22:44:29 localhost kernel: ata5.00: cmd
c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
77.
Dec 16 22:44:29 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
78.
Dec 16 22:44:29 localhost kernel: ata5: hard resetting port
79.
Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
80.
Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133
81.
Dec 16 22:44:29 localhost kernel: ata5: EH complete
82.
Dec 16 22:44:29 localhost kernel: ata5.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x2 frozen
83.
Dec 16 22:44:29 localhost kernel: ata5.00: cmd
c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
84.
Dec 16 22:44:29 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
85.
Dec 16 22:44:29 localhost kernel: ata5: hard resetting port
86.
Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
87.
Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Pavel Machek: "Re: [PATCH] x86_64: fix problems due to use of "outb" to port 80on some AMD64x2 laptops, etc."
Previous message: David Miller: "Re: sockets affected by IPsec always block (2.6.23)"
Next in thread: Jean-Louis Dupond: "sata_mv not working with a RocketRaid 2220"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]