sata_mv not working with a RocketRaid 2220

[Jean-Louis Dupond]

Added CC to linux-ide

-------- Originele bericht --------
Onderwerp: 	sata_mv not working with a RocketRaid 2220
Datum: 	Mon, 17 Dec 2007 00:15:30 +0100
Van: 	Jean-Louis Dupond <info@xxxxxxxxxxx>
Aan: 	linux-kernel@xxxxxxxxxxxxxxx



Hello,

I'm trying to get my HighPoint RocketRaid Controller working with the 
sata_mv drivers.
But something is not working correctly :(

Kernel version 2.6.23.11 (also tried 2.6.24-rc5 with same results)
Controller in lspci: Marvell Technology Group Ltd. MV88SX6081 8-port 
SATA II PCI-X Controller (rev 07)

 1.
    Dec 16 22:44:29 localhost kernel: sata_mv 0000:05:08.0: Gen-II 32
    slots 8 ports SCSI mode IRQ via INTx
 2.
    Dec 16 22:44:29 localhost kernel: scsi4 : sata_mv
 3.
    Dec 16 22:44:29 localhost kernel: scsi5 : sata_mv
 4.
    Dec 16 22:44:29 localhost kernel: scsi6 : sata_mv
 5.
    Dec 16 22:44:29 localhost kernel: scsi7 : sata_mv
 6.
    Dec 16 22:44:29 localhost kernel: scsi8 : sata_mv
 7.
    Dec 16 22:44:29 localhost kernel: scsi9 : sata_mv
 8.
    Dec 16 22:44:29 localhost kernel: scsi10 : sata_mv
 9.
    Dec 16 22:44:29 localhost kernel: scsi11 : sata_mv
10.
    Dec 16 22:44:29 localhost kernel: ata5: SATA max UDMA/133 cmd
    0x0000000000000000 ctl 0xffffc20010122120 bmdma 0x0000000000000000
    irq 16
11.
    Dec 16 22:44:29 localhost kernel: ata6: SATA max UDMA/133 cmd
    0x0000000000000000 ctl 0xffffc20010124120 bmdma 0x0000000000000000
    irq 16
12.
    Dec 16 22:44:29 localhost kernel: ata7: SATA max UDMA/133 cmd
    0x0000000000000000 ctl 0xffffc20010126120 bmdma 0x0000000000000000
    irq 16
13.
    Dec 16 22:44:29 localhost kernel: ata8: SATA max UDMA/133 cmd
    0x0000000000000000 ctl 0xffffc20010128120 bmdma 0x0000000000000000
    irq 16
14.
    Dec 16 22:44:29 localhost kernel: ata9: SATA max UDMA/133 cmd
    0x0000000000000000 ctl 0xffffc20010132120 bmdma 0x0000000000000000
    irq 16
15.
    Dec 16 22:44:29 localhost kernel: ata10: SATA max UDMA/133 cmd
    0x0000000000000000 ctl 0xffffc20010134120 bmdma 0x0000000000000000
    irq 16
16.
    Dec 16 22:44:29 localhost kernel: ata11: SATA max UDMA/133 cmd
    0x0000000000000000 ctl 0xffffc20010136120 bmdma 0x0000000000000000
    irq 16
17.
    Dec 16 22:44:29 localhost kernel: ata12: SATA max UDMA/133 cmd
    0x0000000000000000 ctl 0xffffc20010138120 bmdma 0x0000000000000000
    irq 16
18.
    Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
    (SStatus 123 SControl 300)
19.
    Dec 16 22:44:29 localhost kernel: ata5.00: ATA-7: SAMSUNG SP2504C,
    VT100-33, max UDMA7
20.
    Dec 16 22:44:29 localhost kernel: ata5.00: 488397168 sectors,
    multi 0: LBA48 NCQ (depth 0/32)
21.
    Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133
22.
    Dec 16 22:44:29 localhost kernel: ata6: SATA link up 3.0 Gbps
    (SStatus 123 SControl 300)
23.
    Dec 16 22:44:29 localhost kernel: ata6.00: ATA-7: SAMSUNG SP2504C,
    VT100-33, max UDMA7
24.
    Dec 16 22:44:29 localhost kernel: ata6.00: 488397168 sectors,
    multi 0: LBA48 NCQ (depth 0/32)
25.
    Dec 16 22:44:29 localhost kernel: ata6.00: configured for UDMA/133
26.
    Dec 16 22:44:29 localhost kernel: ata7: SATA link up 3.0 Gbps
    (SStatus 123 SControl 300)
27.
    Dec 16 22:44:29 localhost kernel: ata7.00: ATA-7: SAMSUNG SP2504C,
    VT100-33, max UDMA7
28.
    Dec 16 22:44:29 localhost kernel: ata7.00: 488397168 sectors,
    multi 0: LBA48 NCQ (depth 0/32)
29.
    Dec 16 22:44:29 localhost kernel: ata7.00: configured for UDMA/133
30.
    Dec 16 22:44:29 localhost kernel: ata8: SATA link up 3.0 Gbps
    (SStatus 123 SControl 300)
31.
    Dec 16 22:44:29 localhost kernel: ata8.00: ATA-7: SAMSUNG SP2504C,
    VT100-33, max UDMA7
32.
    Dec 16 22:44:29 localhost kernel: ata8.00: 488397168 sectors,
    multi 0: LBA48 NCQ (depth 0/32)
33.
    Dec 16 22:44:29 localhost kernel: ata8.00: configured for UDMA/133
34.
    Dec 16 22:44:29 localhost kernel: ata9: SATA link up 3.0 Gbps
    (SStatus 123 SControl 300)
35.
    Dec 16 22:44:29 localhost kernel: ata9.00: ATA-7: SAMSUNG SP2504C,
    VT100-33, max UDMA7
36.
    Dec 16 22:44:29 localhost kernel: ata9.00: 488397168 sectors,
    multi 0: LBA48 NCQ (depth 0/32)
37.
    Dec 16 22:44:29 localhost kernel: ata9.00: configured for UDMA/133
38.
    Dec 16 22:44:29 localhost kernel: ata10: SATA link down (SStatus 0
    SControl 300)
39.
    Dec 16 22:44:29 localhost kernel: ata11: SATA link up 3.0 Gbps
    (SStatus 123 SControl 300)
40.
    Dec 16 22:44:29 localhost kernel: ata11.00: ATA-7: SAMSUNG
    SP2504C, VT100-33, max UDMA7
41.
    Dec 16 22:44:29 localhost kernel: ata11.00: 488397168 sectors,
    multi 0: LBA48 NCQ (depth 0/32)
42.
    Dec 16 22:44:29 localhost kernel: ata11.00: configured for UDMA/133
43.
    Dec 16 22:44:29 localhost kernel: ata12: SATA link down (SStatus 0
    SControl 300)
44.
    Dec 16 22:44:29 localhost kernel: scsi 4:0:0:0: Direct-Access    
    ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
45.
    Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] 488397168
    512-byte hardware sectors (250059 MB)
46.
    Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Write Protect
    is off
47.
    Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Mode Sense: 00
    3a 00 00
48.
    Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Write cache:
    enabled, read cache: enabled, doesn't support DPO or FUA
49.
    Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] 488397168
    512-byte hardware sectors (250059 MB)
50.
    Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Write Protect
    is off
51.
    Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Mode Sense: 00
    3a 00 00
52.
    Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Write cache:
    enabled, read cache: enabled, doesn't support DPO or FUA
53.
    Dec 16 22:44:29 localhost kernel:  sdb:<3>ata5.00: exception Emask
    0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
54.
    Dec 16 22:44:29 localhost kernel: ata5.00: cmd
    c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
55.
    Dec 16 22:44:29 localhost kernel:          res
    40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
56.
    Dec 16 22:44:29 localhost kernel: ata5: soft resetting port
57.
    Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
    (SStatus 123 SControl 300)
58.
    Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133
59.
    Dec 16 22:44:29 localhost kernel: ata5: EH complete
60.
    Dec 16 22:44:29 localhost kernel: ata5.00: exception Emask 0x0
    SAct 0x0 SErr 0x0 action 0x2 frozen
61.
    Dec 16 22:44:29 localhost kernel: ata5.00: cmd
    c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
62.
    Dec 16 22:44:29 localhost kernel:          res
    40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
63.
    Dec 16 22:44:29 localhost kernel: ata5: soft resetting port
64.
    Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
    (SStatus 123 SControl 300)
65.
    Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133
66.
    Dec 16 22:44:29 localhost kernel: ata5: EH complete
67.
    Dec 16 22:44:29 localhost kernel: ata5.00: exception Emask 0x0
    SAct 0x0 SErr 0x0 action 0x2 frozen
68.
    Dec 16 22:44:29 localhost kernel: ata5.00: cmd
    c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
69.
    Dec 16 22:44:29 localhost kernel:          res
    40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
70.
    Dec 16 22:44:29 localhost kernel: ata5: soft resetting port
71.
    Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
    (SStatus 123 SControl 300)
72.
    Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133
73.
    Dec 16 22:44:29 localhost kernel: ata5: EH complete
74.
    Dec 16 22:44:29 localhost kernel: ata5: limiting SATA link speed
    to 1.5 Gbps
75.
    Dec 16 22:44:29 localhost kernel: ata5.00: exception Emask 0x0
    SAct 0x0 SErr 0x0 action 0x6 frozen
76.
    Dec 16 22:44:29 localhost kernel: ata5.00: cmd
    c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
77.
    Dec 16 22:44:29 localhost kernel:          res
    40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
78.
    Dec 16 22:44:29 localhost kernel: ata5: hard resetting port
79.
    Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
    (SStatus 123 SControl 300)
80.
    Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133
81.
    Dec 16 22:44:29 localhost kernel: ata5: EH complete
82.
    Dec 16 22:44:29 localhost kernel: ata5.00: exception Emask 0x0
    SAct 0x0 SErr 0x0 action 0x2 frozen
83.
    Dec 16 22:44:29 localhost kernel: ata5.00: cmd
    c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
84.
    Dec 16 22:44:29 localhost kernel:          res
    40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
85.
    Dec 16 22:44:29 localhost kernel: ata5: hard resetting port
86.
    Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
    (SStatus 123 SControl 300)
87.
    Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/