Re: [PATCH 5/6] Driver for WM97xx touchscreens in streaming modeon PXA2xx systems

[Marc Kleine-Budde]

reMark Brown wrote:
> Signed-off-by: Liam Girdwood <liam.girdwood@xxxxxxxxxxxxxxxx>
> Signed-off-by: Graeme Gregory <gg@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Mike Arthur <mike.arthur@xxxxxxxxxxxxxxxx>
> Signed-off-by: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> Cc: Stanley Cai <stanley.cai@xxxxxxxxx>
> Cc: Rodolfo Giometti <giometti@xxxxxxxxxxxx>
> Cc: Russell King <rmk@xxxxxxxxxxxxxxxx>
> Cc: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
                                ^^
it's mkl@xxxxxxxxxxxxxx

> Cc: Ian Molton <spyro@xxxxxxx>
> Cc: Vince Sanders <vince@xxxxxxxxxxxx>
> Cc: Andrew Zabolotny <zap@xxxxxxxxxxx>
> ---
>  drivers/input/touchscreen/pxa-wm97xx.c |  298 ++++++++++++++++++++++++++++++++
>  1 files changed, 298 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/input/touchscreen/pxa-wm97xx.c
> 
> diff --git a/drivers/input/touchscreen/pxa-wm97xx.c b/drivers/input/touchscreen/pxa-wm97xx.c
> new file mode 100644
> index 0000000..870508a
> --- /dev/null
> +++ b/drivers/input/touchscreen/pxa-wm97xx.c
> @@ -0,0 +1,298 @@
> +/*
> + * pxa-wm97xx.c  --  pxa-wm97xx Continuous Touch screen driver for
> + *                   Wolfson WM97xx AC97 Codecs.
> + *
> + * Copyright 2004 Wolfson Microelectronics PLC.
> + * Author: Liam Girdwood
> + *         liam.girdwood@xxxxxxxxxxxxxxxx or linux@xxxxxxxxxxxxxxxx
> + * Parts Copyright : Ian Molton <spyro@xxxxxxx>
> + *                   Andrew Zabolotny <zap@xxxxxxxxxxx>
> + *
> + *  This program is free software; you can redistribute  it and/or modify it
> + *  under  the terms of  the GNU General  Public License as published by the
> + *  Free Software Foundation;  either version 2 of the  License, or (at your
> + *  option) any later version.
> + *
> + * Notes:
> + *     This is a wm97xx extended touch driver to capture touch
> + *     data in a continuous manner on the Intel XScale archictecture
> + *
> + *  Features:
> + *       - codecs supported:- WM9705, WM9712, WM9713
> + *       - processors supported:- Intel XScale PXA25x, PXA26x, PXA27x
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/version.h>
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/delay.h>
> +#include <linux/irq.h>
> +#include <linux/interrupt.h>
> +#include <linux/wm97xx.h>
> +#include <linux/io.h>
> +#include <asm/arch/pxa-regs.h>
> +
> +#define VERSION		"0.13"
> +
> +struct continuous {
> +	u16 id;    /* codec id */
> +	u8 code;   /* continuous code */
> +	u8 reads;  /* number of coord reads per read cycle */
> +	u32 speed; /* number of coords per second */
> +};
> +
> +#define WM_READS(sp) ((sp / HZ) + 1)
> +
> +static const struct continuous cinfo[] = {
> +	{WM9705_ID2, 0, WM_READS(94), 94},
> +	{WM9705_ID2, 1, WM_READS(188), 188},
> +	{WM9705_ID2, 2, WM_READS(375), 375},
> +	{WM9705_ID2, 3, WM_READS(750), 750},
> +	{WM9712_ID2, 0, WM_READS(94), 94},
> +	{WM9712_ID2, 1, WM_READS(188), 188},
> +	{WM9712_ID2, 2, WM_READS(375), 375},
> +	{WM9712_ID2, 3, WM_READS(750), 750},
> +	{WM9713_ID2, 0, WM_READS(94), 94},
> +	{WM9713_ID2, 1, WM_READS(120), 120},
> +	{WM9713_ID2, 2, WM_READS(154), 154},
> +	{WM9713_ID2, 3, WM_READS(188), 188},
> +};
> +
> +/* continuous speed index */
> +static int sp_idx;
> +static u16 last, tries;
> +
> +/*
> + * Pen sampling frequency (Hz) in continuous mode.
> + */
> +static int cont_rate = 200;
> +module_param(cont_rate, int, 0);
> +MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)");
> +
> +/*
> + * Pen down detection.
> + *
> + * This driver can either poll or use an interrupt to indicate a pen down
> + * event. If the irq request fails then it will fall back to polling mode.
> + */
> +static int pen_int;
> +module_param(pen_int, int, 0);
> +MODULE_PARM_DESC(pen_int, "Pen down detection (1 = interrupt, 0 = polling)");
> +
> +/*
> + * Pressure readback.
> + *
> + * Set to 1 to read back pen down pressure
> + */
> +static int pressure;
> +module_param(pressure, int, 0);
> +MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)");
> +
> +/*
> + * AC97 touch data slot.
> + *
> + * Touch screen readback data ac97 slot
> + */
> +static int ac97_touch_slot = 5;
> +module_param(ac97_touch_slot, int, 0);
> +MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number");
> +
> +
> +/* flush AC97 slot 5 FIFO on pxa machines */
> +#ifdef CONFIG_PXA27x
> +static void wm97xx_acc_pen_up(struct wm97xx *wm)
> +{
> +	set_current_state(TASK_INTERRUPTIBLE);
> +	schedule_timeout(1);
> +
> +	while (MISR & (1 << 2))
> +		MODR;
> +}
> +#else
> +static void wm97xx_acc_pen_up(struct wm97xx *wm)
> +{
> +	int count = 16;
> +	set_current_state(TASK_INTERRUPTIBLE);
> +	schedule_timeout(1);
> +
> +	while (count < 16) {
> +		MODR;
> +		count--;
> +	}
> +}
> +#endif
> +
> +static int wm97xx_acc_pen_down(struct wm97xx *wm)
> +{
> +	u16 x, y, p = 0x100 | WM97XX_ADCSEL_PRES;
> +	int reads = 0;
> +
> +	/* data is never immediately available after pen down irq */
> +	set_current_state(TASK_INTERRUPTIBLE);
> +	schedule_timeout(1);
> +
> +	if (tries > 5) {
> +		tries = 0;
> +		return RC_PENUP;
> +	}
> +
> +	x = MODR;
> +	if (x == last) {
> +		tries++;
> +		return RC_AGAIN;
> +	}
> +	last = x;
> +	do {
> +		if (reads)
> +			x = MODR;
> +		y = MODR;
> +		if (pressure)
> +			p = MODR;
> +
> +		/* are samples valid */
> +		if ((x & 0x7000) != WM97XX_ADCSEL_X ||
> +			(y & 0x7000) != WM97XX_ADCSEL_Y ||
> +			(p & 0x7000) != WM97XX_ADCSEL_PRES)
> +			goto up;
> +
> +		/* coordinate is good */
> +		tries = 0;
> +		input_report_abs(wm->input_dev, ABS_X, x & 0xfff);
> +		input_report_abs(wm->input_dev, ABS_Y, y & 0xfff);
> +		input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff);
> +		input_sync(wm->input_dev);
> +		reads++;
> +	} while (reads < cinfo[sp_idx].reads);
> +up:
> +	return RC_PENDOWN | RC_AGAIN;
> +}
> +
> +static int wm97xx_acc_startup(struct wm97xx *wm)
> +{
> +	int idx = 0;
> +
> +	/* check we have a codec */
> +	if (wm->ac97 == NULL)
> +		return -ENODEV;
> +
> +	/* Go you big red fire engine */
> +	for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) {
> +		if (wm->id != cinfo[idx].id)
> +			continue;
> +		sp_idx = idx;
> +		if (cont_rate <= cinfo[idx].speed)
> +			break;
> +	}
> +	wm->acc_rate = cinfo[sp_idx].code;
> +	wm->acc_slot = ac97_touch_slot;
> +	dev_info(wm->dev,
> +		 "pxa2xx accelerated touchscreen driver, %d samples/sec\n",
> +		 cinfo[sp_idx].speed);
> +
> +	/* codec specific irq config */
> +	if (pen_int) {
> +		switch (wm->id) {
> +		case WM9705_ID2:
> +			wm->pen_irq = IRQ_GPIO(4);
> +			set_irq_type(IRQ_GPIO(4), IRQT_BOTHEDGE);
> +			break;
> +		case WM9712_ID2:
> +		case WM9713_ID2:
> +			/* enable pen down interrupt */
> +			/* use PEN_DOWN GPIO 13 to assert IRQ on GPIO line 2 */
> +			wm->pen_irq = MAINSTONE_AC97_IRQ;

I'm missing some kind of abstraction here, what about non mainstone
boards with the pen irq wired to some other gpio?

> +			wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
> +					   WM97XX_GPIO_POL_HIGH,
> +					   WM97XX_GPIO_STICKY,
> +					   WM97XX_GPIO_WAKE);
> +			wm97xx_config_gpio(wm, WM97XX_GPIO_2, WM97XX_GPIO_OUT,
> +					   WM97XX_GPIO_POL_HIGH,
> +					   WM97XX_GPIO_NOTSTICKY,
> +					   WM97XX_GPIO_NOWAKE);
> +			break;
> +		default:
> +			dev_err(wm->dev,
> +				"pen down irq not supported on this device\n");
> +			pen_int = 0;
> +			break;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static void wm97xx_acc_shutdown(struct wm97xx *wm)
> +{
> +	/* codec specific deconfig */
> +	if (pen_int) {
> +		switch (wm->id & 0xffff) {
> +		case WM9705_ID2:
> +			wm->pen_irq = 0;
> +			break;
> +		case WM9712_ID2:
> +		case WM9713_ID2:
> +			/* disable interrupt */
> +			wm->pen_irq = 0;
> +			break;
> +		}
> +	}
> +}
> +
> +static void wm97xx_irq_enable(struct wm97xx *wm, int enable)
> +{
> +	if (enable)
> +		enable_irq(wm->pen_irq);
> +	else
> +		disable_irq(wm->pen_irq);
> +}
> +
> +static struct wm97xx_mach_ops pxa_mach_ops = {
> +	.acc_enabled = 1,
> +	.acc_pen_up = wm97xx_acc_pen_up,
> +	.acc_pen_down = wm97xx_acc_pen_down,
> +	.acc_startup = wm97xx_acc_startup,
> +	.acc_shutdown = wm97xx_acc_shutdown,
> +	.irq_enable = wm97xx_irq_enable,
> +};
> +
> +static int pxa_wm97xx_probe(struct device *dev)
> +{
> +	struct wm97xx *wm = dev->driver_data;
> +	return wm97xx_register_mach_ops(wm, &pxa_mach_ops);
> +}
> +
> +static int pxa_wm97xx_remove(struct device *dev)
> +{
> +	struct wm97xx *wm = dev->driver_data;
> +	wm97xx_unregister_mach_ops(wm);
> +	return 0;
> +}
> +
> +static struct device_driver pxa_wm97xx_driver = {
> +	.name = "wm97xx-touchscreen",
> +	.bus = &wm97xx_bus_type,
> +	.owner = THIS_MODULE,
> +	.probe = pxa_wm97xx_probe,
> +	.remove = pxa_wm97xx_remove
> +};
> +
> +static int __init pxa_wm97xx_init(void)
> +{
> +	return driver_register(&pxa_wm97xx_driver);
> +}
> +
> +static void __exit pxa_wm97xx_exit(void)
> +{
> +	driver_unregister(&pxa_wm97xx_driver);
> +}
> +
> +module_init(pxa_wm97xx_init);
> +module_exit(pxa_wm97xx_exit);
> +
> +/* Module information */
> +MODULE_AUTHOR("Liam Girdwood <liam.girdwood@xxxxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("wm97xx continuous touch driver for pxa2xx");
> +MODULE_LICENSE("GPL");

regards - Marc

-- 
 Marc Kleine-Budde              Phone: +49-231-2826-924
 Pengutronix - Linux Solutions for Science and Industry
 Vertretung West/Dortmund     http://www.pengutronix.de

Attachment: signature.asc
Description: OpenPGP digital signature