Re: Bad value with w83627thf

[Oliver Pinter]

Hi Jean!

sorry for the bad ML.

the battery is CR2032, and it is 3V, im older kernel alway reported
bad value 0,02V or 2,4V (i think it is a possible value), after i
inserted new battery, show 2,4V.
from the 2.6.26-rcX kernel showed the 3+ V. when i reboot to older
kernel, the this state remained, but when turned off the pc, then not.


On 5/16/08, Jean Delvare <khali@xxxxxxxxxxxx> wrote:
> Hi Oliver,
>
> You are writing to the wrong mailing list (i2c instead of lm-sensors)
> so I am redirecting.
>
> On Fri, 16 May 2008 14:59:21 +0200, Oliver Pinter wrote:
>> linux-2.6 - git HEAD on: 9662369
>> lm-sensors: 1:3.0.1-5
>> libsensors4: 1:3.0.1-5
>> os: debian lenny
>> sernsor: w83627thf on asus p4c800 MB
>>
>> with 2.6.26-rcX kernel, reported false Battery values,
>> -------------------------------------->
>> VBat:        +3.26 V  (min =  +0.02 V, max =  +3.01 V)   ALARM
>> <-------------------------------------
>
> There is nothing wrong here. +3.26V sounds possible and correct for the
> battery voltage. If you are worried about the min and max values: it is
> up to you to edit your sensors3.conf file to set them properly if the
> BIOS of your motherboard did not (apply the changes with "sensors -s").
> The alarm will go away when you do.
>
>> lspci -xxx
>> 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus
>> Controller (rev 02)
>> 00: 86 80 d3 24 01 00 80 02 02 00 05 0c 00 00 00 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 01 04 00 00 00 00 00 00 00 00 00 00 43 10 a6 80
>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 00
>> 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00
>
> Completely irrelevant here, the Winbond W83627THF is an LPC chip, it
> doesn't have an I2C/SMBus interface, so the SMBus controller doesn't
> matter at all.
>
> --
> Jean Delvare
>


-- 
Thanks,
Oliver
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/