Re: 2.6.26-rc2-mm1: possible circular locking dependency detected
From: Mariusz Kozlowski
Date: Tue May 20 2008 - 06:05:50 EST
Hello,
This lockdep warning is seen when I remove pcmcia wifi card
from the slot. Doesn't happen every time. It's x86_32.
=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.26-rc2-mm1 #2
-------------------------------------------------------
pccardd/1037 is trying to acquire lock:
(rtnl_mutex){--..}, at: [<c02870f1>] rtnl_lock+0x14/0x16
but task is already holding lock:
(&socket->skt_mutex){--..}, at: [<c02608ba>] pccardd+0x161/0x28c
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&socket->skt_mutex){--..}:
[<c013fff0>] __lock_acquire+0xf3b/0x103b
[<c0140169>] lock_acquire+0x79/0x92
[<c02cfcd5>] mutex_lock_nested+0x90/0x290
[<c02600a6>] pccard_register_pcmcia+0x22/0x78
[<ded5af02>] pcmcia_bus_add_socket+0x9f/0xe0 [pcmcia]
[<c0251c02>] class_interface_register+0x83/0xb2
[<ded6003a>] 0xded6003a
[<c0146115>] sys_init_module+0x11e/0x18e4
[<c0103001>] sysenter_past_esp+0x6a/0xa5
[<ffffffff>] 0xffffffff
-> #1 (&cls->mutex){--..}:
[<c013fff0>] __lock_acquire+0xf3b/0x103b
[<c0140169>] lock_acquire+0x79/0x92
[<c02cfcd5>] mutex_lock_nested+0x90/0x290
[<c024f4a0>] device_add+0x42f/0x557
[<c02895a1>] netdev_register_kobject+0x76/0x7b
[<c027e3f6>] register_netdevice+0x22e/0x39a
[<c027e599>] register_netdev+0x37/0x44
[<c03ce7fb>] loopback_net_init+0x38/0x7d
[<c027bb59>] register_pernet_operations+0x18/0x1a
[<c027bbd3>] register_pernet_device+0x24/0x51
[<c03ce7c1>] loopback_init+0x12/0x14
[<c03b9721>] kernel_init+0x80/0x227
[<c0103c13>] kernel_thread_helper+0x7/0x10
[<ffffffff>] 0xffffffff
-> #0 (rtnl_mutex){--..}:
[<c013fb8e>] __lock_acquire+0xad9/0x103b
[<c0140169>] lock_acquire+0x79/0x92
[<c02cfcd5>] mutex_lock_nested+0x90/0x290
[<c02870f1>] rtnl_lock+0x14/0x16
[<c027e04d>] unregister_netdev+0x10/0x1f
[<ded9d11f>] orinoco_cs_detach+0x20/0x32 [orinoco_cs]
[<ded5775a>] pcmcia_device_remove+0x3c/0xcf [pcmcia]
[<c0250efe>] __device_release_driver+0x5e/0x84
[<c0250fe2>] device_release_driver+0x20/0x2b
[<c0250434>] bus_remove_device+0x73/0x8b
[<c024ef95>] device_del+0xdb/0x14b
[<c024f015>] device_unregister+0x10/0x1a
[<ded5768e>] pcmcia_card_remove+0x76/0x8c [pcmcia]
[<ded5825d>] ds_event+0x59/0x9e [pcmcia]
[<c025ffa6>] send_event+0x7c/0xa8
[<c02601da>] socket_remove_drivers+0x17/0x19
[<c02601ef>] socket_shutdown+0x13/0xcc
[<c02602d3>] socket_remove+0x2b/0x31
[<c026098f>] pccardd+0x236/0x28c
[<c01318bb>] kthread+0x3b/0x5d
[<c0103c13>] kernel_thread_helper+0x7/0x10
[<ffffffff>] 0xffffffff
other info that might help us debug this:
1 lock held by pccardd/1037:
#0: (&socket->skt_mutex){--..}, at: [<c02608ba>] pccardd+0x161/0x28c
stack backtrace:
Pid: 1037, comm: pccardd Not tainted 2.6.26-rc2-mm1 #2
[<c013d8d6>] print_circular_bug_tail+0x68/0x71
[<c013cfd5>] ? print_circular_bug_entry+0x43/0x4b
[<c013fb8e>] __lock_acquire+0xad9/0x103b
[<c013f42f>] ? __lock_acquire+0x37a/0x103b
[<c013f42f>] ? __lock_acquire+0x37a/0x103b
[<c0108587>] ? native_sched_clock+0x66/0xaf
[<c0140169>] lock_acquire+0x79/0x92
[<c02870f1>] ? rtnl_lock+0x14/0x16
[<c02cfcd5>] mutex_lock_nested+0x90/0x290
[<c02870f1>] ? rtnl_lock+0x14/0x16
[<c02870f1>] ? rtnl_lock+0x14/0x16
[<c02870f1>] rtnl_lock+0x14/0x16
[<c027e04d>] unregister_netdev+0x10/0x1f
[<ded9d11f>] orinoco_cs_detach+0x20/0x32 [orinoco_cs]
[<ded5775a>] pcmcia_device_remove+0x3c/0xcf [pcmcia]
[<c0250efe>] __device_release_driver+0x5e/0x84
[<c0250fe2>] device_release_driver+0x20/0x2b
[<c0250434>] bus_remove_device+0x73/0x8b
[<c024ef95>] device_del+0xdb/0x14b
[<c024f015>] device_unregister+0x10/0x1a
[<ded5768e>] pcmcia_card_remove+0x76/0x8c [pcmcia]
[<ded5825d>] ds_event+0x59/0x9e [pcmcia]
[<c02601da>] ? socket_remove_drivers+0x17/0x19
[<c025ffa6>] send_event+0x7c/0xa8
[<c02601da>] socket_remove_drivers+0x17/0x19
[<c02601ef>] socket_shutdown+0x13/0xcc
[<c0120d15>] ? printk+0x20/0x22
[<c02602d3>] socket_remove+0x2b/0x31
[<c026098f>] pccardd+0x236/0x28c
[<c02cf0e8>] ? schedule+0x2c4/0x46f
[<c011b3eb>] ? sub_preempt_count+0x76/0xbd
[<c011b15f>] ? default_wake_function+0x0/0x12
[<c0260759>] ? pccardd+0x0/0x28c
[<c01318bb>] kthread+0x3b/0x5d
[<c0131880>] ? kthread+0x0/0x5d
[<c0103c13>] kernel_thread_helper+0x7/0x10
=======================
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/