Re: [spi-devel-general] [PATCH] SST25L (non JEDEC) SPI Flash driver

[Baruch Siach]

Hi Ryan,

On Mon, Jun 22, 2009 at 03:58:51PM +1200, Ryan Mallon wrote:
> +static int sst25l_erase_block(struct sst25l_flash *flash, u32 offset)
> +{
> +	u8 command[4];
> +	int err;
> +
> +	err = sst25l_write_enable(flash, 1);

Is this enable/disable strictly required for each write/erase? Can't we just 
enable write once?

> +	if (err)
> +		return err;
> +
> +	command[0] = SST25L_CMD_BLOCK_ERASE;
> +	command[1] = offset >> 16;
> +	command[2] = offset >> 8;
> +	command[3] = offset;
> +	err = spi_write(flash->spi, command, 4);
> +	if (err)
> +		return err;
> +
> +	err = sst25l_wait_till_ready(flash);
> +	if (err)
> +		return err;
> +
> +	return sst25l_write_enable(flash, 0);
> +}

baruch

-- 
                                                     ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch@xxxxxxxxxx - tel: +972.2.679.5364, http://www.tkos.co.il -
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/