Re: [spi-devel-general] [PATCH] SST25L (non JEDEC) SPI Flash driver

[Ryan Mallon]

Baruch Siach wrote:
> Hi Ryan,
> 
> On Mon, Jun 22, 2009 at 03:58:51PM +1200, Ryan Mallon wrote:
>> +static int sst25l_erase_block(struct sst25l_flash *flash, u32 offset)
>> +{
>> +	u8 command[4];
>> +	int err;
>> +
>> +	err = sst25l_write_enable(flash, 1);
> 
> Is this enable/disable strictly required for each write/erase? Can't we just 
> enable write once?

The datasheet says that prior to any write/erase instruction the write
enable instruction must be sent.

~Ryan

-- 
Bluewater Systems Ltd - ARM Technology Solution Centre

       Ryan Mallon                              Unit 5, Amuri Park
       Phone: +64 3 3779127                     404 Barbadoes St
       Fax:   +64 3 3779135                     PO Box 13 889
       Email: ryan@xxxxxxxxxxxxxxxx             Christchurch, 8013
       Web:   http://www.bluewatersys.com       New Zealand
       Freecall Australia  1800 148 751         USA 1800 261 2934
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/