[PATCH] PCAP regulator driver (for 2.6.32).

From: Daniel Ribeiro
Date: Thu Jun 25 2009 - 16:30:19 EST

Add (partial) support for the voltage regulators on the PCAP2 PMIC.

Signed-off-by: Daniel Ribeiro <drwyrm@xxxxxxxxx>

---
drivers/regulator/Kconfig | 7 +
drivers/regulator/Makefile | 1 +
drivers/regulator/pcap-regulator.c | 336 ++++++++++++++++++++++++++++++++++++
3 files changed, 344 insertions(+), 0 deletions(-)

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index f431779..db1cc08 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -117,4 +117,11 @@ config REGULATOR_LP3971
Say Y here to support the voltage regulators and convertors
on National Semiconductors LP3971 PMIC

+config REGULATOR_PCAP
+ tristate "PCAP2 regulator driver"
+ depends on EZX_PCAP
+ help
+ This driver provides support for the voltage regulators of the
+ PCAP2 PMIC.
+
endif
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 4d762c4..3a9748f 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -16,5 +16,6 @@ obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
+obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o

ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
diff --git a/drivers/regulator/pcap-regulator.c b/drivers/regulator/pcap-regulator.c
new file mode 100644
index 0000000..13308cd
--- /dev/null
+++ b/drivers/regulator/pcap-regulator.c
@@ -0,0 +1,336 @@
+/*
+ * PCAP2 Regulator Driver
+ *
+ * Copyright (c) 2009 Daniel Ribeiro <drwyrm@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/ezx-pcap.h>
+
+static const u16 V1_table[] = {
+ 2775, 1275, 1600, 1725, 1825, 1925, 2075, 2275,
+};
+
+static const u16 V2_table[] = {
+ 2500, 2775,
+};
+
+static const u16 V3_table[] = {
+ 1075, 1275, 1550, 1725, 1876, 1950, 2075, 2275,
+};
+
+static const u16 V4_table[] = {
+ 1275, 1550, 1725, 1875, 1950, 2075, 2275, 2775,
+};
+
+static const u16 V5_table[] = {
+ 1875, 2275, 2475, 2775,
+};
+
+static const u16 V6_table[] = {
+ 2475, 2775,
+};
+
+static const u16 V7_table[] = {
+ 1875, 2775,
+};
+
+#define V8_table V4_table
+
+static const u16 V9_table[] = {
+ 1575, 1875, 2475, 2775,
+};
+
+static const u16 V10_table[] = {
+ 5000,
+};
+
+static const u16 VAUX1_table[] = {
+ 1875, 2475, 2775, 3000,
+};
+
+#define VAUX2_table VAUX1_table
+
+static const u16 VAUX3_table[] = {
+ 1200, 1200, 1200, 1200, 1400, 1600, 1800, 2000,
+ 2200, 2400, 2600, 2800, 3000, 3200, 3400, 3600,
+};
+
+static const u16 VAUX4_table[] = {
+ 1800, 1800, 3000, 5000,
+};
+
+static const u16 VSIM_table[] = {
+ 1875, 3000,
+};
+
+static const u16 VSIM2_table[] = {
+ 1875,
+};
+
+static const u16 VVIB_table[] = {
+ 1300, 1800, 2000, 3000,
+};
+
+static const u16 SW1_table[] = {
+ 900, 950, 1000, 1050, 1100, 1150, 1200, 1250,
+ 1300, 1350, 1400, 1450, 1500, 1600, 1875, 2250,
+};
+
+#define SW2_table SW1_table
+
+static const u16 SW3_table[] = {
+ 4000, 4500, 5000, 5500,
+};
+
+struct pcap_regulator {
+ const u8 reg;
+ const u8 en;
+ const u8 index;
+ const u8 stby;
+ const u8 lowpwr;
+ const u8 n_voltages;
+ const u16 *voltage_table;
+};
+
+#define NA 0xff
+
+#define VREG_INFO(_vreg, _reg, _en, _index, _stby, _lowpwr) \
+ [_vreg] = { \
+ .reg = _reg, \
+ .en = _en, \
+ .index = _index, \
+ .stby = _stby, \
+ .lowpwr = _lowpwr, \
+ .n_voltages = ARRAY_SIZE(_vreg##_table), \
+ .voltage_table = _vreg##_table, \
+ }
+
+static struct pcap_regulator vreg_table[] = {
+ VREG_INFO(V1, PCAP_REG_VREG1, 1, 2, 18, 0),
+ VREG_INFO(V2, PCAP_REG_VREG1, 5, 6, 19, 22),
+ VREG_INFO(V3, PCAP_REG_VREG1, 7, 8, 20, 23),
+ VREG_INFO(V4, PCAP_REG_VREG1, 11, 12, 21, 24),
+ /* V5 STBY and LOWPWR are on PCAP_REG_VREG2 */
+ VREG_INFO(V5, PCAP_REG_VREG1, 15, 16, 12, 19),
+
+ VREG_INFO(V6, PCAP_REG_VREG2, 1, 2, 14, 20),
+ VREG_INFO(V7, PCAP_REG_VREG2, 3, 4, 15, 21),
+ VREG_INFO(V8, PCAP_REG_VREG2, 5, 6, 16, 22),
+ VREG_INFO(V9, PCAP_REG_VREG2, 9, 10, 17, 23),
+ VREG_INFO(V10, PCAP_REG_VREG2, 10, NA, 18, 24),
+
+ VREG_INFO(VAUX1, PCAP_REG_AUXVREG, 1, 2, 22, 23),
+ /* VAUX2 ... VSIM2 STBY and LOWPWR are on PCAP_REG_LOWPWR */
+ VREG_INFO(VAUX2, PCAP_REG_AUXVREG, 4, 5, 0, 1),
+ VREG_INFO(VAUX3, PCAP_REG_AUXVREG, 7, 8, 2, 3),
+ VREG_INFO(VAUX4, PCAP_REG_AUXVREG, 12, 13, 4, 5),
+ VREG_INFO(VSIM, PCAP_REG_AUXVREG, 17, 18, NA, 6),
+ VREG_INFO(VSIM2, PCAP_REG_AUXVREG, 16, NA, NA, 7),
+ VREG_INFO(VVIB, PCAP_REG_AUXVREG, 19, 20, NA, NA),
+
+ VREG_INFO(SW1, PCAP_REG_SWCTRL, 1, 2, NA, NA),
+ VREG_INFO(SW2, PCAP_REG_SWCTRL, 6, 7, NA, NA),
+ /* SW3 STBY is on PCAP_REG_AUXVREG */
+ VREG_INFO(SW3, PCAP_REG_SWCTRL, 11, 12, 24, NA),
+
+ /* SWxS used to control SWx voltage on standby */
+/* VREG_INFO(SW1S, PCAP_REG_LOWPWR, NA, 12, NA, NA),
+ VREG_INFO(SW2S, PCAP_REG_LOWPWR, NA, 20, NA, NA), */
+};
+
+static int pcap_regulator_set_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)];
+ void *pcap = rdev_get_drvdata(rdev);
+ int uV;
+ u32 tmp;
+ u8 i;
+
+ if (vreg->n_voltages == 1)
+ return -EINVAL;
+
+ for (i = 0; i < vreg->n_voltages; i++) {
+ /* For V1 the first is not the best match */
+ if (i == 0 && rdev_get_id(rdev) == V1)
+ i = 1;
+ else if (i + 1 == vreg->n_voltages && rdev_get_id(rdev) == V1)
+ i = 0;
+
+ uV = vreg->voltage_table[i] * 1000;
+ if (min_uV <= uV && uV <= max_uV) {
+ ezx_pcap_read(pcap, vreg->reg, &tmp);
+ tmp &= ~((vreg->n_voltages - 1) << vreg->index);
+ tmp |= i << vreg->index;
+ ezx_pcap_write(pcap, vreg->reg, tmp);
+ return 0;
+ }
+ if (i == 0 && rdev_get_id(rdev) == V1)
+ i = vreg->n_voltages - 1;
+ }
+
+ return -EINVAL;
+}
+
+static int pcap_regulator_get_voltage(struct regulator_dev *rdev)
+{
+ struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)];
+ void *pcap = rdev_get_drvdata(rdev);
+ u32 tmp;
+ int mV;
+
+ if (vreg->n_voltages == 1)
+ return vreg->voltage_table[0] * 1000;
+
+ ezx_pcap_read(pcap, vreg->reg, &tmp);
+ tmp = ((tmp >> vreg->index) & (vreg->n_voltages - 1));
+ mV = vreg->voltage_table[tmp];
+
+ return mV * 1000;
+}
+
+static int pcap_regulator_enable(struct regulator_dev *rdev)
+{
+ struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)];
+ void *pcap = rdev_get_drvdata(rdev);
+ u32 tmp;
+
+ if (vreg->en == NA)
+ return -EINVAL;
+
+ ezx_pcap_read(pcap, vreg->reg, &tmp);
+ tmp |= (1 << vreg->en);
+ ezx_pcap_write(pcap, vreg->reg, tmp);
+
+ return 0;
+}
+
+static int pcap_regulator_disable(struct regulator_dev *rdev)
+{
+ struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)];
+ void *pcap = rdev_get_drvdata(rdev);
+ u32 tmp;
+
+ if (vreg->en == NA)
+ return -EINVAL;
+
+ ezx_pcap_read(pcap, vreg->reg, &tmp);
+ tmp &= ~(1 << vreg->en);
+ ezx_pcap_write(pcap, vreg->reg, tmp);
+
+ return 0;
+}
+
+static int pcap_regulator_is_enabled(struct regulator_dev *rdev)
+{
+ struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)];
+ void *pcap = rdev_get_drvdata(rdev);
+ u32 tmp;
+
+ if (vreg->en == NA)
+ return -EINVAL;
+
+ ezx_pcap_read(pcap, vreg->reg, &tmp);
+ return (tmp >> vreg->en) & 1;
+}
+
+static int pcap_regulator_list_voltage(struct regulator_dev *rdev,
+ unsigned int index)
+{
+ struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)];
+
+ return vreg->voltage_table[index] * 1000;
+}
+
+static struct regulator_ops pcap_regulator_ops = {
+ .list_voltage = pcap_regulator_list_voltage,
+ .set_voltage = pcap_regulator_set_voltage,
+ .get_voltage = pcap_regulator_get_voltage,
+ .enable = pcap_regulator_enable,
+ .disable = pcap_regulator_disable,
+ .is_enabled = pcap_regulator_is_enabled,
+};
+
+#define VREG(_vreg) \
+ [_vreg] = { \
+ .name = #_vreg, \
+ .id = _vreg, \
+ .n_voltages = ARRAY_SIZE(_vreg##_table), \
+ .ops = &pcap_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ }
+
+static struct regulator_desc pcap_regulators[] = {
+ VREG(V1), VREG(V2), VREG(V3), VREG(V4), VREG(V5), VREG(V6), VREG(V7),
+ VREG(V8), VREG(V9), VREG(V10), VREG(VAUX1), VREG(VAUX2), VREG(VAUX3),
+ VREG(VAUX4), VREG(VSIM), VREG(VSIM2), VREG(VVIB), VREG(SW1), VREG(SW2),
+};
+
+static int __devinit pcap_regulator_probe(struct platform_device *pdev)
+{
+ struct regulator_dev *rdev;
+ void *pcap = platform_get_drvdata(pdev);
+
+ rdev = regulator_register(&pcap_regulators[pdev->id], &pdev->dev,
+ pdev->dev.platform_data, pcap);
+ if (IS_ERR(rdev))
+ return PTR_ERR(rdev);
+
+ platform_set_drvdata(pdev, rdev);
+
+ /*
+ * The regulator framework doesn't like regulators which default
+ * to ON at boot time, so we just disable it here (when it is safe).
+ */
+ if (pdev->id == VAUX2 || pdev->id == VAUX3)
+ pcap_regulator_disable(rdev);
+
+ return 0;
+}
+
+static int __devexit pcap_regulator_remove(struct platform_device *pdev)
+{
+ struct regulator_dev *rdev = platform_get_drvdata(pdev);
+
+ regulator_unregister(rdev);
+
+ return 0;
+}
+
+static struct platform_driver pcap_regulator_driver = {
+ .driver = {
+ .name = "pcap-regulator",
+ },
+ .probe = pcap_regulator_probe,
+ .remove = __devexit_p(pcap_regulator_remove),
+};
+
+static int __init pcap_regulator_init(void)
+{
+ return platform_driver_register(&pcap_regulator_driver);
+}
+
+static void __exit pcap_regulator_exit(void)
+{
+ platform_driver_unregister(&pcap_regulator_driver);
+}
+
+module_init(pcap_regulator_init);
+module_exit(pcap_regulator_exit);
+
+MODULE_AUTHOR("Daniel Ribeiro <drwyrm@xxxxxxxxx>");
+MODULE_DESCRIPTION("PCAP2 Regulator Driver");
+MODULE_LICENSE("GPL");
--
tg: (69e76aa..) ezx/pcap_regulator (depends on: ezx/local/pcap)

--
Daniel Ribeiro

Attachment: signature.asc
Description: Esta =?ISO-8859-1?Q?=E9?= uma parte de mensagemassinada digitalmente