Re: Driver for a SmartCard interface on a SoC

[Alan Cox]

On Fri, 7 May 2010 15:18:50 +0200
Juergen Beisert <jbe@xxxxxxxxxxxxxx> wrote:

> Hi,
> 
> most SmartCard readers are external devices, connected via USB or
> serial lines. So, they do not need special in-kernel drivers.
> 
> My SmartCard interface is part of a SoC (i.MX25 CPU). So, I need an
> in-kernel driver. Where would be the best place in the kernel tree,
> to add a driver for this kind of device? Maybe "drivers/char"?
> To exchange data with the plugged in SmartCard, only a couple of
> IOCTLs are required (detecting if a card is plugged in, socket power
> on/off, send reset to the card, configuring the communication
> parameters). Data exchange with the SmartCard can be done with simple
> read/write.

I'd say drivers/char if its a generic char device, but if its MX25
specific code entirely then drivers/platform or arch/.../platform.

The other question is one of API - it's going to best if the API isn't
MX25 specific but could reasonably be expected to work with other
future devices. A fake tty interface is probably overkill for that but
it would be good to get general review of any API.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/